Previous Article | Next Article ![]()
Journal of Virology, April 2007, p. 3640-3644, Vol. 81, No. 7
0022-538X/07/$08.00+0 doi:10.1128/JVI.02254-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.
,
Department of Pathology and Laboratory Medicine,1 Keck Center Pharmacoinformatics Training Program of the Gulf Coast Consortia, University of Texas Medical School at Houston, 6431 Fannin, Houston, Texas 77030,2 Myles H. Thaler Center for AIDS and Human Retrovirus Research, Department of Microbiology,3 Department of Medicine, University of Virginia, Charlottesville, Virginia 229084
Received 14 October 2006/ Accepted 28 December 2006
|
|
|---|
|
|
|---|
Earlier studies suggest that the HSV-1 portal exists at a single vertex of the capsid (13), a finding that is analogous to the portal complex within DNA bacteriophages (16, 21). In bacteriophages, the portal connects to a large tail outside the capsid (21), which has allowed its visualization by asymmetric single-particle reconstruction (3, 8, 11). However, the capsids of herpesviruses do not have such protrusions, making it difficult to locate this unique vertex by conventional cryoEM methods. In gammaherpesviruses, the existence of the portal complex was never established due to difficulties in isolating adequate amounts of purified capsid materials for biochemical analyses and the lack of antibodies against PORT of any gammaherpesviruses. Recent advances in cryoelectron tomography (cryoET) have made it possible to reconstruct a three-dimensional (3D) structure from a single particle and capture relatively subtle features of asymmetrically arranged structures at near molecular resolution. In this study, we took advantage of this technology to identify a unique vertex that is different from the other 11 pentons in the KSHV capsid, thus providing the first evidence of the existence of a portal complex in gammaherpesvirus capsids.
KSHV capsids were purified from the media of lytically induced KSHV-infected BCBL-1 cells as previously described (12, 24). An aliquot of 3 µl of the purified capsids was placed onto a carbon-coated grid with holes in it and quickly frozen to liquid nitrogen temperature so that the capsid particles were embedded in a thin layer of vitreous ice. Tilt series were recorded with an electron dose of
1 electron/Å2/micrograph at a magnification of x38,200 and 8-µm underfocus in an FEI 300-kV G2 Polara cryoelectron microscope (FEI Co., Hillsboro, OR), equipped with a 16-megapixel charge-coupled device camera and the EMMENU data acquisition software (TVIPS GmbH, Gauting, Germany). A total of 18 sets of tilt series (average tilt angle range of 63° to +63°; see, e.g., Fig. 1a) were processed by using a marker-free alignment approach and back-projection 3D reconstruction method (23). The final 3D tomograms were filtered to a 50-Å resolution using a Gaussian low-pass filter. For averaging of cryoET tomograms, 3D alignments of individual capsid structures were first adjusted manually and subsequently refined computationally by using the Foldhunter program (7). Surface and volume rendering were performed using the Chimera visualization software package (17).
![]() View larger version (151K): [in a new window] |
FIG. 1. CryoET of KSHV capsids. (a) Representative original images (at tilt angles of 0°, ±30°, and ± 60°) from a 72° to 66° cryoET tilt series recorded at 8-µm underfocus and 300 kV. (b) Representative density slice from the 3D tomographic reconstruction showing A and B capsids. (c) Serial slices 7.9 Å thick parallel to the unique vertex axis of an A capsid. The arrow points to a density attached only to one of the 12 vertices. (d to g) Slices 7.9 Å thick perpendicular to the vertex axis of either a penton (d and e) or the unique vertex (f and g). (h and i) Same as panels f and g, except that the slices are shown after averaging three A capsids at different orientations. The radial distance between the two slices (d and e, f and g, or h and i) is 100 Å.
|
140 Å and height of
150 Å attached to the capsid floor (Fig. 1c and g). This umbilicated density is slightly smaller than the penton (
140 Å in diameter and
160 Å in height) and has a central axial channel that measures approximately 50 Å in diameter and 70 Å in depth (Fig. 1g to i). To eliminate structural artifacts and misinterpretation that might arise from the limited tilt range inherent in cryoET analysis, we averaged cryoET reconstructions of three A capsids with different orientations relative to the specimen stage (Fig. 1h and i). The averaged 3D tomogram (Fig. 2 and see Movie S2 in the supplemental material) showed the penton and hexon arrangement characteristic of the T = 16 icosahedral lattice evident in cryoEM icosahedral reconstructions (20, 24), demonstrating the validity of our cryoET analysis. Most notably, it clearly confirmed the absence of a penton and the presence of an internal density with a central channel at the unique vertex (Fig. 1h and i and Fig. 2; also see the movies in the supplemental material). Thus, in the absence of biochemical data, our structural data firmly established that the KSHV capsid contains one unique vertex and 150 hexons and 11 pentons arranged on a T = 16 icosahedral lattice. We proposed that, like HSV-1 capsid, KSHV capsid also contains a bacteriophage-like portal complex and that the unique vertex identified in our cryoET structure is the KSHV portal.
![]() View larger version (76K): [in a new window] |
FIG. 2. Structure of the KSHV portal. (a) Shaded surface representation of an averaged A capsid cryoET reconstruction, as viewed roughly along a two-fold axis. A cavity appears at one of the 12 vertices. The signal/noise ratio was improved by imposing a five-fold symmetry along the unique vertex axis identified in the above analysis. (b and c) A 7.9-Å-thick slice (b) and (c) cutaway shaded surface view of a 100-Å thick slab of the unique vertex. (d) One penton vertex with its five neighboring hexons. (e) The portal vertex and its five neighboring hexons. Maps in panels d and e are colored based on radial distance from the vertex axis. The densities closest to the vertex axis are shown in red and then change to green and blue at the farthest distance from the axes. The second and third rows in panels d and e are side views obtained by rotating forward from the first row with their upper portions of the structure removed for clarity.
|
29 connector (18) (Fig. 3a) into our KSHV portal vertex in our cryoET capsid reconstruction (Fig. 3b) confirmed the match of their diameters, while demonstrating that the bacteriophage connector is significantly shorter.
![]() View larger version (76K): [in a new window] |
FIG. 3. Fitting of the bacteriophage 29 portal connector complex (18) into the portal of KSHV capsid. (a) 29 portal determined by X-ray crystallography (Protein Data Bank no. 1FOU) shown as density map filtered to 10-Å resolution (semitransparent pink) superimposed with three subunits in ribbon representation. (b) 29 portal (red) fitted into the KSHV portal. The orientations of the side views are the same as those in Fig. 2d and e.
|
The existence of an umbilicated density at a single vertex of the KSHV capsid seems to mirror the inner portion of the bacteriophage portal complex, suggesting at least some evolutionary conservation of function as well. In bacteriophages, in addition to the connector and the external tail complexes, there is an additional internal density that may facilitate the double-stranded DNA genome packaging and/or release (3, 8, 11). KSHV PORT is
8% smaller than HSV-1 PORT (UL6), with molecular masses of 74 kDa (15) and 68 kDa, respectively. Regardless, the mass of each of these herpesvirus proteins is nearly twice that of the bacteriophage
29 connector protein (36 kDa) (18) and thus may account for the difference in length between the
29 connector and the internal density of the unique vertex of KSHV capsid we observed in our map (Fig. 3b). Nevertheless, at the low resolution of the cryoET reconstruction, we cannot rule out the possibility that additional proteins may also contribute to the density we detected at the unique vertex (Fig. 3b). KSHV contributors could include the proteins encoded by ORF7 and ORF29, the homologs of HSV-1 UL28 and UL15, respectively. Indeed, HSV-1 PORT interacts with UL28 as well as UL15 (10, 22), and HCMV PORT (UL104) likewise interacts with pUL56 (KSHV ORF7 homolog) (5). In HSV-1, UL28 and UL15 are associated with PORT transiently during viral DNA packaging (reviewed in reference 1) and together form the terminase, a protein complex that possibly includes an additional protein, encoded by UL33 (2). Direct molecular evidence that the proteins encoded by KSHV ORF7 and ORF29 are also involved in DNA packaging is lacking, although by sequence homology to these proteins, it remains reasonable to hypothesize that these proteins may be components of the putative portal complex of KSHV capsid. Taken together with the conservation of the channel and the diameter of both bacteriophage connectors and herpesvirus portal complexes, our in situ identification of the unique vertex within the intact KSHV capsid provides compelling evidence for the existence of a bacteriophage-like portal in KSHV and similar mechanisms of DNA encapsidation and/or release across herpesviruses. Confirmation of these hypotheses resulting from our cryoET structural data, however, awaits future biochemical analyses, which are currently prohibited by technical limitations in KSHV capsid isolation.
Protein structure accession number. The 3D structure reported in this paper has been deposited in the EBI database under accession number EMD-1320.
We thank Ivo Atanasov for technical assistance with imaging.
Published ahead of print on 10 January 2007. ![]()
Supplemental material for this article may be found at http://jvi.asm.org. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»