Previous Article | Next Article ![]()
Journal of Virology, April 2007, p. 3317-3326, Vol. 81, No. 7
0022-538X/07/$08.00+0 doi:10.1128/JVI.01866-06
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

,
Annett Stange,1,
Hanswalter Zentgraf,2 and
Dirk Lindemann1*
Institut für Virologie, Medizinische Fakultät "Carl Gustav Carus," Technische Universität Dresden, Dresden,1 Deutsches Krebsforschungszentrum, Heidelberg, Germany2
Received 28 August 2006/ Accepted 5 January 2007
|
|
|---|
|
|
|---|
Foamy viruses (FVs) use a replication strategy distinct from that of orthoretroviruses in several of its features and similar in some aspects to that of hepadnaviruses (reviewed in references 9 and 36). The FV particle release process, in particular, following a B/D-type assembly strategy with preassembled capsid structures in the cytoplasm, is unique among retroviruses in that coexpression of FV Gag and Env is essential for this process (1, 14). This is due to a very specific interaction, which has been mapped to the N-terminal, cytoplasmic region of the FV glycoprotein leader peptide (LP). An evolutionarily conserved W10XXW13 sequence motif interacts with the N-terminal region of FV Gag, which is essential for membrane association and budding to occur (6, 26, 48). This suggests that both the Gag and Env proteins of FVs contain structural information essential for particle formation and release. However, some functions might be redundant in the two proteins. This possibility is supported by the observation that FV glycoprotein expression is sufficient for the release of subviral particles into the supernatant (41), the extent of which is regulated by posttranslational ubiquitylation of FV Env (43). Furthermore, artificial membrane targeting of FV Gag by N-terminal addition of a myristoylation signal sequence results in release of virus-like particles, similar to what is observed for orthoretroviruses upon Gag expression (12).
The prototype FV (PFV) Gag protein displays a highly unusual structural organization and remarkable properties for a retrovirus capsid protein (reviewed in reference 28). Unlike orthoretrovirus Gag proteins, it is not processed into MA, CA, and NC subunits. Only a single proteolytic cleavage event, resulting in the removal of a C-terminal 3-kDa peptide from the p71gag precursor protein, takes place during particle assembly (reviewed in reference 16). Whereas p71gag expression alone leads to incompletely closed capsids that are noninfectious, the morphology of particles derived from expression of the processed p68gag protein is indistinguishable from that of wild-type particles, but their specific infectivity is reduced by 2 orders of magnitude (13, 14, 44, 51). No further Gag maturation upon particle release is observed. However, secondary cleavage sites within PFV Gag have been characterized by in vitro assays and have been demonstrated to be essential for infectivity (24, 33). This suggests an unusual uncoating process involving essential PFV protease-mediated Gag processing at secondary cleavage sites.
So far, no high-resolution structure of the PFV Gag protein or any of its subdomains is available, and very few functional domains and sequence motifs have been characterized. Close to the N terminus, a sequence motif with strong homology to the cytoplasmic targeting and retention signal (CTRS) of Mason-Pfizer monkey virus (MPMV), which is essential for the intracytoplasmic assembly of MPMV capsids, has been identified (7, 12). Interestingly, while mutation of a conserved arginine (R50) residue of the PFV CTRS motif led to complete abolishment of PFV particle assembly and release, mutation of the corresponding residue in MPMV Gag (R55) resulted in a switch of the particle assembly strategy from B/D type to C type. Furthermore, two coiled-coil domains located in the N-terminal third of the PFV Gag protein have been characterized. The first, which spans amino acids (aa) 130 to 160, was implicated in Gag-Gag protein interactions, whereas the second, encompassing aa 160 to 180, seemed to play a role in microtubule-mediated intracellular trafficking of intact, incoming PFV particles to the microtubule organizing center by an interaction with the dynein light chain 8 protein (32, 38, 46). Primate FVs contain three glycine/arginine-rich basic sequences (GR boxes) in the C-terminal third of the p68gag protein, instead of the canonical cysteine-histidine motifs usually found in the NC domain of orthoretrovirus Gag proteins (40). GR box I has binding activities for both RNA and DNA; GR box II contains a nuclear localization signal that leads to a transient nuclear Gag staining pattern during PFV infection; and GR box III has no assigned function yet (40, 49). In addition, analysis of the particle density of Rous sarcoma virus (RSV) Gag chimeras that had their NC domain replaced by PFV sequences spanning various parts of the C-terminal domain (CTD) of p68gag from aa 414 to 613, harboring the GR boxes, suggested the presence of two I domains in this region of the PFV Gag protein (4).
Recently, the analysis of candidate L-domain sequence motifs in PFV Gag led to the characterization of a PSAP (aa 284 to 287) motif with classical L-domain activity that is important for particle release and can be functionally replaced by heterologous L-domain sequence motifs (31, 42). In these studies a linkage of PFV egress in a tumor susceptibility gene (Tsg-101)-dependent manner to the ESCRT (endosomal sorting complex required for transport) machinery of the vacuolar protein sorting pathway by the PFV Gag PSAP motif was demonstrated (31, 42). In addition, an evolutionarily conserved YXXL motif (aa 464 to 467) with no conventional L-domain function was identified (42). Mutation of this motif led to a moderate reduction in PFV particle release and a complete loss of particle infectivity as a result of aberrant capsid morphogenesis (42). In this study we further characterize and analyze the function of this sequence motif for PFV replication.
|
|
|---|
Expression constructs.
A schematic
outline of the constructs used in this study is shown in Fig.
1. The four-plasmid PFV vector system (Fig.
1A), consisting of the PFV
Gag (PG) expression vector pcziPG2 (pcziGag2), the PFV Pol
(PP) expression vector pcziPol, the PFV Env (PE) expression construct
pczHFVenvEM002, and the enhanced green fluorescent protein
(EGFP)-expressing PFV transfer vector (PV) pMD9, has been described
previously (19). For some
experiments a variant PFV Pol expression construct (p6iPol
RT),
expressing a catalytically inactive Pol protein containing the M69
(YVDD312-315GAAA) mutation described previously
(29), was used. The
original PFV Gag L3 mutant, with the YEIL motif starting at aa 464
changed to AAAA, has been described previously
(42). All other mutants
were generated using standard PCR cloning techniques and mutagenesis
primers. Details are available upon request. The PFV Gag point mutants
harbor the following mutations: Y464A, E465A,
I466A, L467A, G468A, and
L469A (Fig.
1B). The
L3
L-domain replacement constructs contain heterologous L-domain sequence
motifs replacing the YEIL motif in PFV Gag (Fig.
1B). The
L3-HIV
construct has an 18-amino-acid sequence
(LQSRPEPTAPPEESFRSG) of human immunodeficiency
virus type 1 (HIV-1) Gag p6 inserted,
L3-EIAV harbors a
peptide (QNLYPDLSEIK) with the L domain of equine
infectious anemia virus (EIAV) Gag p9, and
L3-RSV contains the
complete RSV Gag p2b peptide
(TASAPPPPYVG).
![]() View larger version (26K): [in a new window] |
FIG. 1. Schematic
illustration of the expression constructs and PFV Gag mutants.
(A) Schematic outline of the four-plasmid PFV vector system
consisting of a gene transfer vector (PV) as well as PFV Env (PE), Pol
(PP), and Gag (PG) expression vectors. CAS I or II, cis-acting
sequence I or II; CMV, cytomegalovirus virus promoter; R, repeat region
of the long terminal repeat; U5, long-terminal-repeat unique 5'
region; U3, long-terminal-repeat unique 3' region; U3,
enhancer-deleted U3 region; SFFV U3, spleen focus-forming virus U3
promoter; SD, splice donor; SA, splice acceptor; pA, polyadenylation
signal sequence. (B) Schematic organization of the PFV Gag
precursor protein and processing products p68 and p3. The locations of
the putative L-domain motifs are indicated as boxes. Below, the amino
acid sequences of L3 motif regions of wild-type and mutant PFV Gag
proteins are shown. Putative L-domain sequence motifs are boldfaced,
and amino acids altered in the mutant constructs are italicized.
(C) Sequence alignment of the L3 motif regions of FV isolates
from different species. Evolutionarily conserved amino acids are
boldfaced. GenBank accession numbers for the cited viral genomes are
NC001736 for PFV, U04327for simian FV-chimpanzee (SFVcpz), X54482 for
simian FV-macaque (SFVmac), M74895 for simian
FV-African green monkey (SFVagm), AJ544579 for
simian FV-orangutan (SFVora), U94514 for bovine
FV (BFV), AF201902 for equine FV (EFV), and
U85043 for feline FV
(FFV).
|
Analysis of temperature sensitivity. For assaying the potential temperature sensitivity of specific mutants, virus was produced either at 37°C or at 30°C, by shifting one plate per construct of duplicate transfections to 30°C during the sodium butyrate induction step. Subsequently, the HT1080 target cells were incubated with viral supernatants or dilutions thereof for 6 h at 37°C or 30°C. After removal of the viral supernatant, the target cells were incubated for an additional 4 h at the corresponding temperature before they were all shifted to 37°C and assayed by FACS 48 h after addition of the viral supernatants to the target cells.
Antisera, Western blot expression analysis, and quantification of particle release. Western blot expression analysis of cell- and particle-associated viral proteins was performed essentially as described previously (26). Polyclonal antisera used were specific for PFV Gag (2) or the LP of PFV Env, aa 1 to 86 (26). Furthermore, hybridoma supernatants specific for PFV reverse transcriptase (RT) (clone 15E10) or PFV integrase (IN) (clone 3E11) were employed in some experiments (21). The chemiluminescence signal was digitally recorded using a LAS-3000 imager and quantified using the Image Gauge software package (both from Fujifilm). Particle release levels relative to that for the wild-type PFV Gag control were determined in independent experiments by quantification of Gag proteins in purified viral particle samples, and values were corrected for different intracellular Gag expression levels in the individual samples.
Real-time PCR analysis. Viral supernatants for real-time PCR analysis were generated as described above, with the modification that during the sodium butyrate induction step and the subsequent viral supernatant production step, DNase I (>3,000 U/mg; Applichem) was added to the medium to a final concentration of 500 µg/ml. Forty-eight hours posttransfection, the cell-free viral supernatant was harvested by sterile filtration (pore size, 0.45 µm) and centrifuged at 4°C and 25,000 rpm for 2 h in an SW40 or SW28 rotor through a 20% sucrose cushion. The supernatant was discarded, and the viral pellet was gently resuspended in phosphate-buffered saline (PBS) and again DNase I digested in a total volume of 150 µl using 150 µg DNase I (>3,000 U/mg) for 1 h at 37°C. Seventy-five microliters of the sample was added to an equal volume of 2x sodium dodecyl sulfate protein sample buffer, separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and analyzed by Western blotting as described above. Thirteen microliters was used for serial dilutions to determine infectivity as described above. The residual 62 µl was adjusted to 140 µl with PBS, used for isolation of viral nucleic acids using the QIAmp viral RNA minikit (QIAGEN) according to the manufacturer's instructions without the optional DNase I digest, and eluted in 60 µl. For analysis of particle-associated viral RNA and DNA, three separate reactions were set up for every sample. For analysis of RNA content, two parallel reactions (reactions 1 and 2) were set up using 5 µl of viral nucleic acid sample each; these were treated in parallel for 30 min at 37°C with DNase I (DNA-free; Ambion) using 2 U DNase I in a total volume of 18 µl each. The third sample (reaction 3) analyzed for viral DNA was mock incubated, omitting only the DNase I. DNase I digestion or mock incubation was terminated according to the manufacturer's protocol using DNase inactivation reagent (Ambion), resulting in a total final reaction sample volume of 10 µl each. Subsequently, all three reaction samples were reverse transcribed (reaction 1) or mock incubated (reactions 2 and 3) in a total volume of 20 µl using the Superscript II reverse transcription kit (Invitrogen) and oligo(dT)30 as the primer according to the manufacturer's instructions. Finally, 5 µl of each reverse transcription reaction product was analyzed by real-time PCR in duplicate in a total volume of 25 µl using the Brilliant SYBR Green QPCR kit (Stratagene) and an MX4000 multiplex quantitative PCR system (Stratagene). Primers (sense, 5'-GCAGTGCTTCAGCCGCTAC-3'; antisense, 5'-AAGAAGATGGTGCGCTCCTG-3') were specific for the EGFP open reading frame and were used at 400 nM (22). Samples were initially denatured for 10 min at 95°C and subsequently amplified in 45 cycles of 30 s at 95°C, 1 min at 59°C, and 45 s at 72°C. Finally, the melting curve of each sample was determined. Quantification was determined in reference to a standard curve prepared by serial dilution of a pUC19 plasmid harboring the complete EGFP open reading frame. The viral genome (DNA or RNA) contents of the individual samples were determined in independent experiments at relative levels compared to that of the wild-type PFV Gag control, and values were corrected for differential particle release of the individual samples, determined by quantitative Western blot analysis as described above.
Reverse transcriptase assay. For analysis of particle-associated reverse transcriptase activity, foamy virus particles were isolated and purified from transiently transfected 293T cell culture supernatants (six 10-cm dishes per sample) by a first ultracentrifugation step as described above in an SW28 rotor. Resuspended viral particles were subsequently proteolytically digested for 2 h at 37°C in a total volume of 200 µl, using 1 µl (5 mg/ml) subtilisin. Digestion was terminated by addition of 2 µl phenylmethylsulfonyl fluoride (20 mg/ml) and incubation at room temperature for 30 min, followed by addition of 10 ml complete cell culture medium and a second ultracentrifugation through 20% sucrose at 25,000 rpm and 4°C for 2 h in an SW40 rotor. Supernatants were discarded and viral pellets gently resuspended in 60 µl PBS. Fifty microliters of each sample was used for Western blot analysis as described above to quantitate PFV particle release for the individual samples. The residual 10 µl and three to five fivefold dilutions thereof were analyzed for PFV RT activity using a RetroSys C-type RT activity assay kit according to the manufacturer's instructions and using the provided murine leukemia virusRT standard. The RT activities of the individual samples were determined in independent experiments at relative levels compared to the RT activity of the wild-type PFV Gag control, and values were corrected for differential particle release of the individual samples, determined by Western blot analysis as described above. As a negative control, a PFV Pol expression construct harboring mutations in the active site (Y312G, V313A, D314A, and D315A) abolishing RT activity (29) was used in combination with the wild-type PFV Gag, Env, and vector constructs.
Electron microscopy analysis. At 48 h posttransfection, the 293T cells were harvested and processed for electron microscopy analysis as described previously (23).
|
|
|---|
L3 RSV construct a
reduction in particle egress in comparison to that for the wild type,
at a level analogous to that of the original L3 mutant (Fig.
2A, lanes 1, 2, and 5;
Fig. 2C). The
L3
HIV and
L3 EIAV mutants showed even greater reductions in
particle release than the original L3 mutant (Fig.
2A, lanes 2, 3, and 4;
Fig. 2C). All mutant
particles showed normal levels of Gag processing in secreted
particulate material (Fig.
2A), which is also an
indirect indication of correct viral genome and PFV Pol incorporation,
as well as of normal levels of Env incorporation (Fig.
2B). Furthermore, none of
the mutant proteins showed any indication of restoration of particle
infectivity, which was abolished upon mutation of the YEIL motif in PFV
Gag (Fig. 2D). This
apparent lack of functional complementation of the PFV Gag YEIL motif
by heterologous L-domain sequence motifs further supports our previous
view that this sequence motif does not function as a classical L
domain.
![]() View larger version (11K): [in a new window] |
FIG. 2. Analysis
of PFV Gag L3 L-domain replacement mutants. Mutant PFV
particles as indicated were generated by transient transfection of 293T
cells using the four-plasmid PFV vector system. (A and B)
Representative Western blot analysis of 293T cell lysates (cell) and
viral particles (virus) purified by ultracentrifugation through 20%
sucrose using either a polyclonal anti-PFV Gag ( -Gag)
(A) or an anti-PFV Env LP ( -LP) (B)
specific antiserum. (C) Quantification of PFV particle
release. Means and standard deviations of
particle-associated PFV
Gag protein expression corrected for intracellular expression levels
(n = 3) are shown. (D) Relative infectivities of cell
supernatants (extracellular) and freeze-thaw cell lysates
(intracellular) using the EGFP marker gene transfer assay. The values
obtained using the wild-type PFV Gag expression plasmid (wt) were
arbitrarily set to 100%. Means and standard deviations from three
independent experiments are shown. 293T cells were cotransfected with
pMD9, pcziPol, pczHFVenvEM002, and either pcziPG2 (wt), pcziPG L3 (L3),
pcziPG L3-HIV ( L3-HIV), pcziPG L3-EIAV
( L3-EIAV), or pcziPG L3-RSV ( L3-RSV). As
controls, cells were transfected with only pcDNA3.1+zeo
(pcDNA).
|
![]() View larger version (37K): [in a new window] |
FIG. 3. Biochemical
analysis of PFV Gag L3 domain motif point mutants. Mutant PFV particles
as indicated were generated by transient transfection of 293T cells
using the four-plasmid PFV vector system. (A to C) Representative
Western blot analysis of 293T cell lysates (cell) and viral particles
(virus) purified by ultracentrifugation through 20% sucrose using
either a polyclonal anti-PFV Gag ( -Gag) antiserum (A), a
polyclonal anti-PFV Env LP ( -LP) specific antiserum (B), or a
mixture of anti-PFV PR/RT ( -PR/RT) and anti-PFV IN
( -IN) monoclonal antibodies (C). (D) Quantification
of PFV particle release. Means and standard deviations of
particle-associated PFV Gag protein expression, corrected for
intracellular expression levels (n = 6), are shown.
293T cells were cotransfected with pMD9, pcziPol, pczHFVenvEM002, and
either pcziPG2 (wt), pcziPG L3 (L3), pcziPG Y464A
(Y464A), pcziPG E465A (E465A), pcziPG I466A
(I466A), pcziPG L467A (L467A), pcziPG G468A
(G468A), pcziPG L469A (L469A), no pcziPG
( Gag), or no pczHFVenvEM002 ( Env). As controls, cells
were transfected with either pcziPol only (Pol), pMD9 only (RNA), or
pcDNA3.1+zeo only
(pcDNA).
|
![]() View larger version (38K): [in a new window] |
FIG. 4. Infectivity
analysis of PFV Gag L3 domain motif point mutants. Mutant PFV particles
as indicated were generated by transient transfection of 293T cells
using the four-plasmid PFV vector system in duplicate. (A and B) During
the sodium butyrate induction step, one plate per construct was shifted
to 30°C (shaded bars) whereas the other plate was incubated at
37°C (solid bars) until virus was harvested from the culture
supernatant (extracellular) (A) or freeze-thaw cell lysates
(intracellular) (B). Subsequently, HT1080 target cells were incubated
for 6 h with viral supernatants or dilutions thereof; after
removal of the viral supernatants, target cells were incubated for an
additional 4 h at the same temperature as before. Then all
target cells were shifted to 37°C, and they were analyzed by
FACS 48 h after addition of the viral supernatants to the
target cells. (C and D) Reciprocal incubation at
37°C (C) or 30°C (D) during
extracellular virus production and subsequent infection of HT1080
target cells using selected PFV Gag L3 motif mutants. Mean relative
infectivities and standard deviations (n = 3) of cell
supernatants (extracellular) and freeze-thaw cell lysates
(intracellular) by the EGFP marker gene transfer assay are shown. The
values obtained using the wild-type PFV Gag expression plasmid (wt)
were arbitrarily set to 100%. 293T cells were cotransfected with pMD9,
pcziPol, pczHFVenvEM002, and either pcziPG2 (wt), pcziPG L3 (L3),
pcziPG Y464A (Y464A), pcziPG E465A (E465A),
pcziPG I466A (I466A), pcziPG L467A (L467A),
pcziPG G468A (G468A), or pcziPG L469A (L469A). As
controls, cells were transfected either with pMD9 only (pMD9) or with
pcDNA3.1+zeo only
(pcDNA).
|
RT), packaged vector RNA efficiently (within a
threefold range of the wild type). In contrast, all PFV Gag mutants,
which showed no detectable infectivities in the GFP transfer assay (L3,
Y464A, I466A, L467A, and
L469A), contained 70- to 200-fold fewer genomic DNA copies
per particle than the wild type, at levels comparable to that of the
RT sample (Fig.
5A). E465A
mutant particles had amounts of reverse-transcribed vector genomes
similar to that of the wild type, whereas the G468A mutant
showed a threefold reduction in particle-associated reverse transcript
levels (Fig. 5A). The
residual amounts of reverse transcripts detected for the
RT
sample, in the range of 0.3% of the wild-type amount, reflect the
detection limit of the real-time DNA PCR and are residual copies of the
input plasmid DNA used to generate the particles by transient
transfection. These were present in the samples despite extensive DNase
I digestion of intact viral particles prior to isolation of
particle-associated nucleic acids (Fig.
5A). A similar background
signal was also observed in analysis of supernatant samples of 239T
cells transfected with the pMD9 gene transfer vector alone or a
nonexpressing pUC19 EGFP control plasmid (data not shown).
![]() View larger version (21K): [in a new window] |
FIG. 5. Nucleic
acid composition and reverse transcriptase activities of mutant PFV
particles. Mutant PFV particles as indicated were generated by
transient transfection of 293T cells using the four-plasmid PFV vector
system. (A) Relative nucleic acid composition of mutant
particles. Following DNase I digestion of intact, purified particles,
nucleic acids were isolated, and the relative amounts of vector RNA and
DNA copies (expressed as percentages) were determined in comparison to
that for the wild type by real-time PCR. Mean relative RNA and DNA
contents and standard deviations (n = 3), normalized
for the differential particle releases of the individual mutants, are
shown. (B) Relative reverse transcriptase activities of
mutant particles. Following subtilisin digestion of intact, purified
particles, particle lysates were generated after an additional
ultracentrifugation step and analyzed for PFV reverse transcriptase
activity using a RetroSys C-type RT enzyme-linked immunosorbent assay.
Mean relative reverse transcriptase activities (n
= 3) and standard deviations, normalized for the differential
particle releases of the individual mutants and expressed as
percentages, are shown. 293T cells were cotransfected with pMD9,
pcziPol, pczHFVenvEM002, and either pcziPG2 (wt), pcziPG L3 (L3),
pcziPG Y464A (Y464A), pcziPG E465A (E465A),
pcziPG I466A (I466A), pcziPG L467A (L467A),
pcziPG G468A (G468A), or pcziPG L469A (L469A). As
a control, cells were transfected with pMD9, pcziPG2,
pczHFVenvEM002, and an RT-deficient Pol expression vector,
pGiPol RT
( RT).
|
Taken together, these results demonstrate a good correlation between the lack of infectiousness of individual mutants and their failure to generate particle-associated reverse transcripts, although they packaged normal amounts of the viral RNA genome and showed only marginally reduced particle-associated RT activities when analyzed in vitro.
Ultrastructural analysis of particle morphogenesis. The previous analysis of the original PFV Gag L3 mutant revealed aberrant particle morphogenesis (42). To determine the role of the YEILGL motif in FV particle morphogenesis in further detail, 293T cells transiently cotransfected with expression vectors for PFV Env, PFV Pol, a packageable vector RNA, and selected PFV Gag point mutants were examined by electron microscopy. The results shown in Fig. 6 demonstrate PFV particle-release from cellular membranes and accumulation of naked capsids in the cytoplasm of cells expressing the wild-type PFV Gag protein (Fig. 6A and B). The E465A mutant showed a wild-type phenotype, including budding from cellular membranes (Fig. 6C) and naked capsids in the cytoplasm (Fig. 6D). Figure 6E to G show the Y464A mutant as an example of the group of mutants that showed no infectivity and completely failed to reverse transcribe their genomes. Similarly to the L3 mutant, electron-dense aggregates that probably represent aggregated Gag proteins were detected in the cytoplasm of cells expressing the Gag Y464A mutant (Fig. 6E). In addition, aberrant budding structures at cellular membranes were observed associated with the typical prominent PFV Env spike structures (Fig. 6F and G). In contrast, the G468A mutant showed an intermediate phenotype, with electron-dense material and only very few normally shaped capsids being detected in the cytoplasm when samples were incubated at 37°C prior to fixation (Fig. 6H and I). In samples incubated overnight at a lower temperature prior to fixation, more capsids with nearly wild type morphology were detectable in the cytoplasm, reflecting the temperature-sensitive phenotype of this mutant (Fig. 6J and K). However, the capsids in the cytoplasm seemed to contain incompletely closed capsids, and both larger and smaller capsids were present at greater frequencies (Fig. 6J and K).
![]() View larger version (154K): [in a new window] |
FIG. 6. Electron
microscopy analysis. Electron micrographs show representative thin
sections of 293T cells transiently cotransfected with the four-plasmid
PFV vector system using either wild-type PFV Gag (A and B), PFV Gag
E465A (C and D), PFV Gag Y464A (E to G), or PFV
Gag G468A (H to K) expression constructs. Magnifications:
x61,000 for panels A, B, E, H, I, J, and K; x45,000 for
panels C and D; x96,000 for panel F; x77,000 for panel
G. Bars, 200
nm.
|
|
|
|---|
In this study, the further characterization of the YEILGL motif by alanine-scanning mutagenesis revealed the importance of conserved amino acids Y464, I466, L467, and L469 for proper PFV capsid morphology and reverse transcription of the PFV RNA genome. In contrast, mutation of the E465 residue was well tolerated, a finding consistent with this amino acid being the least conserved in the sequence motif (Fig. 1C). Of particular interest was the G468A Gag mutant, which displayed an intermediate, temperature-sensitive phenotype. Biochemical characterization of the individual point mutants revealed normal relative levels of Env and Pol incorporation into particles. This excluded a lack of viral glycoprotein or enzyme incorporation as the cause of the lack of infectiousness of the released mutant particles.
FVs, unlike orthoretroviruses, reverse transcribe their RNA genome during, or shortly after, capsid assembly in the virus-producing cell (reviewed in reference 28). Previously it has been reported that PFV Gag p71/p68 cleavage is required for viral infectivity (13). Inactivation of the p71/p68 cleavage site by mutagenesis resulted in the generation of PFV particles with incompletely closed capsids at higher frequencies. Furthermore, these mutants were noninfectious and failed to accumulate linear PFV cDNA in transfected cells. However, neither particle-associated PFV cDNA content nor incorporation of Pol into particles was analyzed for the p71/p68 cleavage site mutants (13). These mutants are particularly interesting in light of the current study, in which all noninfectious Gag mutants displayed aberrant particle morphologies and failed to reverse transcribe the viral RNA genome. Altogether, this is reminiscent of certain HIV-1 Gag mutants that display aberrant capsid morphologies, are associated with defects in early steps of the viral replication cycle, and lead to incomplete reverse transcription of the viral genome or failure to initiate reverse transcription (10, 15, 35, 47).
Orthoretrovirus Gag proteins are processed by the viral protease into several mature subunits, including MA, CA, and NC. Structural analysis of HIV-1 Gag has revealed that the CA subunit contains two separately folding domains connected by a short 5-residue linker (17, 18). In general, the N-terminal domain (NTD) is involved in shaping the virion morphology, whereas the CTD is essential for capsid assembly. Unlike orthoretrovirus Gag proteins, FV Gag proteins are not processed into MA, CA, and NC subunits and lack the major homology domain found in all other retrovirus CA CTDs. Furthermore, due to a lack of sequence homology between FV Gag proteins and orthoretrovirus Gag proteins, no clear MA, CA, and NC subdomains can be assigned (reviewed in reference 28). When the phenotypes of the noninfectious PFV Gag mutants identified in this study are compared to those of Gag mutants of other retroviruses, they resemble most closely those of HIV-1 with mutations in the CA NTD. Like the PFV Gag mutants, these HIV Gag mutants show aberrant capsid morphologies, and in some studies they have been shown to harbor a defect in reverse transcription (15, 35, 45). This suggests that the YEILGL motif is part of a Gag subdomain with a role analogous to that of the HIV-1 CA NTD in influencing capsid morphology.
A short distance from the C terminus of the YEILGL motif (aa 464 to 469), another functional domain has been characterized: GR box I (aa 485 to 510) (49). GR box I, analogous to orthoretrovirus NC domain zinc finger motifs, displays nucleic acid binding activities and is essential for FV RNA genome packaging (49). Furthermore, the region spanning aa 414 to 540, containing both the YEILGL motif and GR box I, has previously been reported to contain an I domain, characterized by analysis of RSV Gag chimeras (4). The reduced particle release of YEILGL motif mutants may indicate that this motif contributes to the I-domain activity of the region spanning PFV Gag aa 414 to 540. However, all noninfectious PFV Gag mutants analyzed in this study package normal relative amounts of viral RNA, and in contrast to orthoretrovirus NC I domains, the YEILGL motif is surrounded by very few positively charged amino acids (8, 39). Therefore, a function of the YEILGL motif as an I domain seems unlikely, although a defect in Gag-Gag interactions due to mutation of the YEILGL motif (and resulting in the moderately decreased particle release observed) cannot be excluded and has not been directly addressed in this study.
Taken together, the results of this study demonstrate that the conserved PFV Gag YXXLGL motif is essential for correct particle assembly and capsid morphology. Furthermore, to our knowledge, our report of the G468A PFV Gag mutant is the first description of a temperature-sensitive assembly defect in PFV Gag, and this mutant should be a useful tool for further analysis of PFV capsid assembly and the genome reverse transcription process. In addition, this study suggests that proper PFV core assembly is required for reverse transcription of the viral genome. However, it is not a prerequisite for incorporation of the other structural proteins, nor does it lead to incorporation of inactive polymerase or an enzymatic defect of the viral reverse transcriptase per se. This suggests that PFV requires a proper microenvironment within the assembled viral capsid in order for reverse transcription of the viral genome to occur.
This work was supported by grants from the DFG (Li621/3-1, Li621/4-1) and the BMBF (01ZZ0102) to D.L.
Published ahead of print on 17 January 2007. ![]()
I.M.
and A. S. contributed equally to this work. ![]()
Present address: Institut für Physiologie,
Ludwig-Maximilians-Universität München, München,
Germany. ![]()
|
|
|---|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»