Previous Article | Next Article ![]()
Journal of Virology, November 2007, p. 12298-12306, Vol. 81, No. 22
0022-538X/07/$08.00+0 doi:10.1128/JVI.00891-07
Copyright © 2007, American Society for Microbiology. All Rights Reserved.

Department of Developmental Medical Sciences, Graduate School of Medicine, The University of Tokyo, Tokyo, Japan,1 Immuno-Probe Co. Ltd., Kamagata, Ranzan-machi, Saitama, Japan,2 Department of Applied Molecular Chemistry, College of Industrial Technology, Nihon University, Chiba, Japan3
Received 26 April 2007/ Accepted 28 August 2007
|
|
|---|
|
|
|---|
Norovirus is classified into five genogroups (genogroup I [GI] to genogroup V [GV]) by genetic diversity: viruses in genogroups I, II, and IV (GI, GII, and GIV, respectively) are associated with diarrhea in humans, with GII also able to infect pigs; genogroups III and V (GIII and GV) are associated with bovines and mice, respectively (19). Moreover, norovirus GI and GII are the main causative agents in humans and subdivided further into at least 15 and 18 genotypes (GI/1 to GI/15 and GII/1 to GII/18), respectively (30).
Because the lack of a cell culture system for norovirus has hindered immunological and structural study, the recombinant virus-like particles (rVLPs), which are morphologically and antigenically similar to native norovirus virions, were expressed by using the baculovirus expression system (12, 16, 37).
Norovirus is composed of 180 molecules (90 dimers) of the single major capsid protein, VP1, which has two principal domains. One is the shell (S) domain, which is highly conserved among animal caliciviruses. The other is the protruding (P) domain, which is divided into three subdomains: N-terminal P1, P2, and C-terminal P1 domains. The P2 domain is the most protruding and diverse domain (37). In addition, the internally located N-terminal domain participates in a network of interactions through domain swapping to assist the assembly of the shell domain into an icosahedral scaffold (6).
Several laboratories have generated polyclonal antibodies by using recombinant VP1 as antigens. The rabbit anti-rVLP polyclonal antibody was highly specific for genotypes used as immunogens (13, 18, 21). This specificity has hindered the development of immunological diagnosis. We previously developed the immunochromatography test for detection of norovirus infection by using the anti-rVLP polyclonal antibody (31); however, this method showed the immunogen's genotype specificity.
Monoclonal antibodies are a useful tool for detecting various kinds of noroviruses, and they are more stable than polyclonal antibodies for use in a rapid immunological assay. The previously reported broadly reactive monoclonal antibodies could be classified into two groups by their epitope properties. The first group recognizes the intergenogroup cross-reactive linear epitopes on the S or P domain, NS14, 1B4, and 1F6 (20, 35, 46, 47). The other group recognizes the intragenogroup cross-reactive conformational epitopes, NV3901 and NV3912 (35, 46). In addition, gaining information about the location of norovirus-specific epitopes is essential for designing diagnostic tools (i.e., enzyme-linked immunosorbent assay [ELISA] and immunochromatography), identifying the neutralizing epitope, and developing antivirals and an effective vaccine.
In this study, we describe characterization of a novel monoclonal antibody, which shows broad reactivity with both GI and GII norovirus rVLPs. These findings could be applied for further development of the rapid immunochromatography test, because immunochromatography using this novel antibody has demonstrated high performance in detecting norovirus infection (28).
|
|
|---|
Production of monoclonal antibody. The P363-Ag-U1 myeloma cell line was used as the parent cell. CsCl-purified GII/4 rVLP (r1207) was used as an immunogen for preparing the monoclonal antibody, as previously described (22).
ELISA for titration of the monoclonal antibody.
Plates with 96 wells (Maxisorp; Nunc, Roskilde, Denmark) were coated with 90 ng of rVLP/well in 60 µl of 0.1 M carbonate buffer (pH 9.6) for 1 h at 37°C. To compare the reactivities of ELISAs with different pHs, two coating buffer solutions with different pH conditions were used. Phosphate-buffered saline (PBS) with a pH of 7.4 was used, and carbonate buffer with a pH of 9.6 was used only for GII/3 rVLP r3229 and GII/4 rVLP r1207. The wells were blocked with 1% bovine serum albumin in PBS containing 0.1% Tween 20 (PBS-T). The plates were incubated overnight at 4°C. After the wells were washed three times with PBS-T, for titration of the monoclonal antibody, 60 µl of a twofold serial dilution was added to each well, starting with a 1:100 dilution of the monoclonal antibody in PBS-T containing 1% bovine serum albumin, and the plate was incubated for 1 h at 37°C. After the wells were washed three times with PBS-T, 60 µl of a 1:4,000 dilution of horseradish peroxidase-conjugated goat anti-mouse immunoglobulin G (IgG) (Biosource International, Camarillo, CA) was allowed to react for 1 h at 37°C as the second antibody. After the wells were washed three times with PBS-T, 60 µl of substrate o-phenylenediamine containing 0.012% H2O2 and 0.2 M citrate-phosphate buffer (pH 5.0) were added to each well and left in the dark for 20 min at room temperature. The reaction was stopped by adding 60 µl of 2 M H2SO4 to each well, and the optical density at 492 nm (OD492) was determined (using OD600 as the reference) with a Labsystems Multiskan MCC microplate reader (Thermo Electron Corporation, Waltham, MA). For this experiment, Tn5 cell lysate was included as a negative control. A sample that which had an OD of
0.2 and signal/noise ratio of
2.0, was considered positive. Each assay was conducted in duplicate.
Fragment construction. The pET 100 directional TOPO vector (Invitrogen Corp., Carlsbad, CA) was used to express the capsid fragments with a His tag. The primers used in this study are shown in Table 1. PCR-amplified fragments of r1207 were generated using the primer pairs indicated by the names of the constructs. The template used for the PCR was the previously reported plasmid containing the complete capsid sequence of r1207 (31). PCR fragments were directly cloned into the pET 100 directional TOPO vector. The plasmids were transformed into Escherichia coli One Shot TOP10 (Invitrogen Corp., Carlsbad, CA). Positive transformants were identified by PCR. The plasmids from positive transformants were transformed further into E. coli BL21 Star cells (Invitrogen Corp., Carlsbad, CA). To express the r1207 capsid fragments, overnight cultures of E. coli BL21 cells, transformed with each plasmid, were diluted to a ratio of 1:20 in fresh Luria-Bertani broth supplemented with 100 µg/ml of ampicillin. The cells were grown at 37°C until the culture reached a certain cell density (when the OD600 was 0.5 to 0.7). Expression was induced by adding 1.0 mM of isopropyl-ß-D-thiogalactopyranoside (IPTG) (Invitrogen Corp., Carlsbad, CA), and cultures were grown for an additional 3 h. The cells were pelleted by centrifugation for 15 min at 3,000 x g at 4°C. The supernatant was removed, and the cell pellet was suspended in a 1/20 volume of lysis buffer (50 mM Tris, pH 8.0, 150 mM NaCl, and a protease inhibitor cocktail [complete, Mini, EDTA-free] [1 tablet/10 ml] [Roche Diagnostics GmbH, Roche Applied Science, Mannheim, Germany]) and gently shaken at 4°C for 30 min. Following that treatment, Triton X-100 and lysozyme were added to concentrations of 1% and 0.2 mg/ml, respectively, and gently shaken at 4°C for 20 min. Finally, the cells were centrifuged for 30 min at 12,000 x g at 4°C, after which the protein was found in the insoluble fraction.
|
View this table: [in a new window] |
TABLE 1. Capsid fragment primers
|
Fragment analysis. Analysis of proteins by sodium dodecyl sulfate-polyacrylamide gel electrophoresis was done by the method of Laemmli et al. (24) with slight modifications. Briefly, 15% polyacrylamide resolving gels and a 5% acrylamide stacking gel were used. Capsid fragments were suspended in electrophoresis sample buffer containing 4% sodium dodecyl sulfate, 10% mercaptoethanol, 125 mM of Tris-HCl (pH 6.8), 0.01% bromophenol blue, and 10% glycerol. Samples were boiled for 5 min. Separated proteins were transferred onto a 0.45 µm polyvinylidene difluoride membrane (Immobilon-P; Millipore, Bedford, MA) in a semidry transfer (CB-09A; ATTO, Tokyo, Japan) at a constant current of 2 mA/cm2 for 30 min. The blotted membrane was washed with PBS-T and blocked with 5% skim milk in PBS-T overnight at 4°C. The membrane was washed with PBS-T and then incubated overnight at 4°C with an antibody against the five-histidine tag (QIAGEN, Hilden, Germany) and antinorovirus monoclonal antibody diluted to 1/10,000 and 1/1,000, respectively, with 0.5% skim milk in PBS-T. The blot was washed with PBS-T and incubated with a 1/10,000 dilution of horseradish peroxidase-conjugated goat anti-mouse IgG (Tago, Burlingame, CA). The blot was then reacted with peroxidase substrate solution (diaminobenzidine; SIGMA, St. Louis, MO) to detect the antigen-antibody complexes on the blot.
Sequence analysis. The ClustalX multiple-sequence alignment program (version 1.83) was used for multiple alignment of constructed rVLP sequences and other genogroups (40). The capsid subdomains were determined based on previously reported data from Prasad et al. (37).
Mutational analysis. Specific residues in the capsid fragment, 418 to 534, were altered using the QuikChange XLII site-directed mutagenesis kit (Stratagene, La Jolla, CA) according to the manufacturer's instructions. Some mutagenesis primers were engineered by the QuikChange Primer Design Program (Stratagene, La Jolla, CA) as shown in Table 2. Generated mutants were purified and analyzed by using the same protocols as those for fragment construction and analysis. Mutant clones were confirmed by sequencing.
|
View this table: [in a new window] |
TABLE 2. Site-directed mutagenesis primers
|
Nucleotide sequence accession numbers. Newly determined sequences were submitted to GenBank under accession numbers DQ975270 and EF547392 through EF547406.
|
|
|---|
|
View this table: [in a new window] |
TABLE 3. Titers of newly developed MAb14-1 with various rVLPs by ELISA
|
![]() View larger version (27K): [in a new window] |
FIG. 1. (A) Reactivities of several capsid fragments for MAb14-1 and anti-His5 antibody (a-His) by Western blotting. 20 K, 20,000. (B) Process of mapping the minimal binding region shown in silver on the map of VP1. WB, Western blotting. Symbols; ++, increase in antigenicity; +, same antigenicity as for r1207; +–, decline in antigenicity; –, abolition of antigenicity. (C) Prediction structure of r1207 (a part of the C-terminal P1 domain prediction structure could not be created through lack of structural data from 1IHM [Protein Data Bank identification code for Norwalk virus capsid protein]). The N-terminal domain (amino acid positions 0 to 45) (green), S domain (positions 46 to 221) (yellow), N-terminal and C-terminal P1 domains (positions 222 to 275 and 418 to 541) (red), and P2 domain (positions 276 to 417) (blue) are indicated in panels B and C.
|
Epitope for monoclonal antibody 14-1. Alignment of the minimal binding regions on rVLPs and other genogroups showed that the deleted terminal regions had genus-specific residues (such as A418 and P419) and genogroup-specific residues (such as V421 and F425), but these regions did not have GI/3-specific single point mutations (Fig. 2).
![]() View larger version (64K): [in a new window] |
FIG. 2. Alignment of the amino acid sequence of the minimal binding region on noroviruses for MAb14-1. The MAb14-1-specific residues (), identical components of the previously reported conformational epitope of NV3901 and NV3912 ( ), and the amino acid positions shared between the epitopes of MAb14-1, NV3901, and NV3912 ( ) are indicated (37). The solid-line and dashed-line boxes represent the N-terminal antigenic region (A region) and C-terminal antigenic region (B and C region), respectively, on the minimal binding region. Dots indicate identical amino acid residues, and dashes indicate gaps. JENAGIII/1 (Bo/Jena/1980/DE [GenBank accession number AJ011099]), BOCHGIII/2 (Bo/CH126/1998/NL [[GenBank accession number AF320625]), ALPH GIV/1 (Hu/Alphatron/1998/NL [GenBank accession number AF195847]), and MUNV GV/I (Mu/Murine norovirus-1/US [GenBank accession number AY228235]).
|
![]() View larger version (20K): [in a new window] |
FIG. 3. (A) Reactivities of the six point mutations by Western blotting analysis. 20 K, 20,000; a-His, anti-His5 antibody. (B) Position of each point mutation on the r1207 prediction structure. The phenylalanine at position 426 (blue), proline at position 427 (red), leucine at position 526 (yellow), alanine at position 527 (green), proline at position 528 (orange), and glycine at position 530 (magenta) are shown.
|
|
|
|---|
|
View this table: [in a new window] |
TABLE 4. Cross-reactivities of representative previously reported broadly reactive monoclonal antibodies with various norovirus capsids by Western blotting and/or ELISA
|
The results of the fragment analysis for VP1 showed that the epitope for MAb14-1 exists on the C-terminal P1 domain, which is more conserved than the N-terminal P1 and P2 domains based on sequence identity among noroviruses. This location of the epitope may be the reason for the same reactivity under different pH conditions because particle (P domain on the surface of the particle) or a single capsid protein did not relate to the accessibility of the epitope on the P domain for MAb14-1.
The fragment analysis for the C-terminal P1 domain and structural analysis showed that almost the whole C-terminal P1 domain generated the conformation of the minimal binding region. Both terminal antigenic regions (amino acid positions 418 to 426 and 526 to 534) on the minimal binding region approached each other via the insertion region (positions 427 to 525). This motif forms the conformational epitope and may explain the broad reactivity, because MAb14-1 was generated by immunization of GII/4, which is the most sophisticated strain for immune response, implying a potential evolutionary selection.
The components of the epitope for MAb14-1 were determined by mutational analysis. It was found that the components comprise six amino acids and are classified into four major groups, groups 1 to 4, by the following reactivities.
(i) Not only was L526 conserved in all rVLP sequences but also the same conserved residues in other genogroups of norovirus were observed. More interestingly, L526 was even conserved among other caliciviruses, suggesting that this leucine residue might be influence the calicivirus-specific reactivity of MAb14-1 (7).
(ii) There were two interpretations of the role of F425, which is conserved among GII. One of them was the generation of high-titer GII-specific antigenicity for MAb14-1. A previous study by Chakravarty et al. also supported this observation (5). The other interpretation was the generation of genus-specific antigenicity, due to the existence of a GI-specific phenylalanine close to GII-specific phenylalanine. For confirmation of this interpretation, site-directed mutagenesis on the GI capsid needs to be performed in the future.
(iii) Three residues, P426, A527, and P528, gave the same result in inducing a significant reduction in reactivity, but their roles were probably different from each other. P426 possibly constructed the epitope directly. Parker et al. previously reported that K527 (GI) directly interacted with E487, generating the GI-specific structure (35). As a result, K527 (GI) may induce a low titer of MAb14-1 for GI. Our results also supported the previous observations reported by Parker et al. (35) and Chakavraty et al. (5), in that the difference between K and A induced a difference of antigenicity between GI and GII. P528, which is conserved among all noroviruses, except for murine norovirus, is the component of the epitope and induces GI and GII cross-reactivity of MAb14-1.
(iv) G530 is the critical component of the epitope. Functional change of protein was usually ignored in the change from G to A, because there is not much difference in character between G and A (35). Nevertheless, our results showed that the change was important. It is suggested that a slight difference from G to A generates moderate effect on reactivity when glycine is the main component of the epitope.
These mutational analyses elucidated the character of the epitope residues, explaining GI and GII cross-reactivity of the epitope and difference in titer among GI and GII. High conservation of the six amino acids among GII explains high GII-specific titer of MAb14-1. Genus-specific residues generate tolerant reactivity for GI. GI-specific residues induce low reactivity of MAb14-1 for GI. These results imply that the epitope for MAb14-1 is the genus-specific epitope. To investigate this possibility, the reactivity of MAb14-1 for GIII-V rVLPs needs to be elucidated further.
Our results could not explain the low affinity to GI/3 for MAb14-1 because we could not find appropriate GI/3-specific mutations in the minimal binding region. Two possible explanations for this were proposed. First, the epitope on GI/3 may be inhibited by a conformational change derived from the remote amino acid residue(s) in the minimal binding region. Second, other domains, such as N, S, N-terminal P1, and P2 domains, may shield or mask the epitope, as in previous reports about human immunodeficiency virus or picornavirus (4, 8, 23, 26, 36, 44). To confirm these hypotheses, we need to conduct further investigation including crystallography studies.
The fragment, sequence, structural, and mutational analyses identified the epitope formed by the six amino acids and excluded any other amino acids composing the epitope. The structural sequence of these six amino acids generates a linear region; therefore, we can consider this epitope to have potential as a linear epitope with the binding property for the monoclonal antibody. Moreover, in a previous finding on the linear epitope, five amino acid residues were essential for antibody binding, which supports our supposition (10).
In comparison with the location of a previously reported cross-reactive epitope on VP1 (3, 34, 35, 46, 47), our identified epitope is obviously a novel conformational one (Fig. 4). However, a previously reported GI cross-reactive conformational epitope for monoclonal antibodies, NV3901 and NV3912, and the novel identified epitope in this study shared two amino acid positions, 527 and 528, but the MAb14-1 showed both GI and GII cross-reactivity (Fig. 2) (35). In addition, previous studies reported that broadly reactive monoclonal antibodies, GI and GII cross-reactive antibodies, NS14, 1B4 and 1F6, have linear epitopes (35, 46, 47). Therefore, MAb14-1 had more advantages than previously reported broadly reactive monoclonal antibodies did. In other words, we were the first to identify the GI and GII cross-reactive monoclonal antibody, which recognizes the novel conformational epitope.
![]() View larger version (9K): [in a new window] |
FIG. 4. Location map of the norovirus cross-reactive monoclonal antibody binding sites (being or containing an epitope) on VP1. The blank (amino acids positions 427 to 525) on the binding site for MAb14-1 means that it is not the region for a binding site but is necessary for generating a binding site structurally. Amino acid numbers correspond to the sequences of the immunogens used to generate the specific antibodies: Southampton virus for CM54 (GenBank accession number L07418) Jena virus for CM39 (GenBank accession number AJ011099) Norwalk virus for NV3901 and NV3912 (GenBank accession number M87661), SMA for NS14 (GenBank accession number U70059), recombinant Norwalk virus capsid protein (NV 96-908) for 8C7 (GenBank accession number AB028247), and recombinant genogroup II virus capsid protein (NV 36) for 1B4 and 1F6 (GenBank accession number AB028244). Ref., reference.
|
In conclusion, to our knowledge, we were the first group to determine the conformational epitope on the norovirus capsid for GI (GI/1, 4, 8, and 11) and GII (GII/1 to 7 and 12 to 15) cross-reactive novel monoclonal antibody, which showed a weak affinity to GI/3. From these data, MAb14-1 could be applied further for the development of the immunochromatography test.
Published ahead of print on 12 September 2007. ![]()
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»