Journal of Virology, November 2005, p. 13829-13836, Vol. 79, No. 21
0022-538X/05/$08.00+0 doi:10.1128/JVI.79.21.13829-13836.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Department of Microbiology and NYU Cancer Institute, New York University School of Medicine, New York, New York 10016
Received 22 June 2005/ Accepted 29 July 2005
|
|
|---|
|
|
|---|
![]() View larger version (42K): [in a new window] |
FIG. 1. Association of wild-type and KK1113AA mutant LANAC with LBS-1 and LBS-2. (A) Schematic showing full-length LANA and fragments used in this study. The amino acid numbering corresponds to the prototype BC-1 sequence (36). The numbers in parentheses signify coordinates of the actual LANA variant (GenBank accession no. AAB62657 [31]) used here. FL, full length; N, LANAN; C, LANAC. (B) EMSA using 32P-labeled probes containing LBS-1 or LBS-1 and LBS-2. The first two lanes of each panel are controls showing the probe mixed with unprogrammed lysate (lanes 1 and 5) and lysate expressing LANAN (lanes 2 and 6; lanes labeled "N"). Lysates expressing LANAC WT (lanes 3 and 7; lanes labeled WT) or LANACKK1113AA (lanes 4 and 8; lanes labeled "M" for "mutant") were incubated with each probe, giving rise to one or more specific complexes (filled and open arrowheads). Nonspecific complexes are indicated with an asterisk. (C) Coimmunoprecipitation assay to monitor self-association. HeLa cells were transiently transfected with expression plasmids (1.5 µg each) encoding FLAG-tagged LANAC WT (lanes 1 and 4), FLAG-LANACKK1113AA (mutant; lanes 2 and 5), or FLAG-LANAN (lane 3) and HA-tagged LANAC WT (lanes 3 and 4), LANACKK1113AA (lane 5), or LANAN (lanes 1 and 2). At 24 h posttransfection, protein extracts were prepared using high-salt extraction buffer and immunoprecipitated (IP) with anti-FLAG antibody ( -FLAG)-coupled beads (Sigma). Immunoprecipitated complexes were resolved by SDS-12% PAGE and probed by immunoblotting with anti-HA ( -HA) antibody (upper panel). One-thirtieth of the starting extracts were immunoblotted in parallel using anti-FLAG (middle panel) or anti-HA (lower panel) antibodies. Nonspecific cross-reactive polypeptides are indicated with an asterisk. Sizes of the molecular mass standards are in kilodaltons. (D) SDS-PAGE analysis of in vitro-translated 35S-labeled proteins used in panel B detected by fluorography.
|
There is no evidence for a resident helicase function in LANA, and instead, it seems likely that its initiation function involves recruiting components of the cellular DNA replication initiation machinery (52). Subunits of the origin recognition complex (ORC) and MCM3 are detected at the TR in latently infected cells by chromatin immunoprecipitation, and there is evidence that LANA interacts directly with at least two ORC subunits (28, 43). In addition to recruiting, LANA may also reorganize the chromatin around the origins and create a specific structure recognized by the ORC (43). Here, we address the architectural consequences of LANA binding to TR DNA. Using a circular permutation assay (CPA), we show that LANAC can induce a strong bend (57° or greater) in the DNA helix of LBS-1. A similar bend is introduced when LBS-2 is occupied, giving a cumulative bend angle of at least 110°. These observations were confirmed by phasing analysis, which also showed that the DNA helix is bent towards the major groove. An alanine substitution mutant within the DNA-binding domain altered the relative gel mobility of the DNA-bound complex and reduced the extent of the induced bend by 25° when both LBSs were occupied. Several other well-characterized viral and bacterial replication initiator proteins, including EBNA1 from Epstein-Barr virus (EBV), induce bends of similar magnitude in origin DNA, suggesting that this is a fundamental aspect of initiator protein function.
Mutation in the C terminus of LANA alters the mobility of the protein-DNA complex.
DNA-binding function by LANAC (Fig. 1A) was analyzed by electrophoretic mobility shift assay (EMSA) using 32P-labeled DNA probes containing either the high-affinity LBS-1 (Fig. 1B, lanes 1 to 4) or the combination of high- and low-affinity sites (LBS-1 and LBS-2 [LBS-1+2]) (Fig. 1B, lanes 5 to 8). The coding sequence for LANAC (residues 936 to 1162 in the prototype sequence) (36) was subcloned into the in vitro translation vector pTCITE, a derivative of pCITE2a+ (Novagen) that adds a T7 epitope tag to the N-terminal end of the recombinant protein. The LANAC protein was then expressed in vitro using the TNT Quick coupled transcription/translation system (Promega) in the presence of [35S]methionine. Probes were prepared by introducing oligonucleotide duplexes spanning LBS-1 (30 bp) or both LBS-1 and LBS-2 (54 bp) into the unique XhoI site of a modified pUC119 polylinker. Radiolabeled probes, with lengths of 157 bp and 181 bp were generated by PCR amplification using flanking primer pairs that had been end labeled with [
-32P]ATP and T4 polynucleotide kinase. Probes were gel purified on a 5% native polyacrylamide gel to remove single-stranded probe DNA and excess primer and then eluted into 10 mM HEPES (pH 7.9), 60 mM KCl. In vitro translation reaction mixtures (5 µl) were incubated with each probe at room temperature for 25 min, with the buffer adjusted to 10 mM HEPES (pH 7.9), 50 mM KCl, 1 mM EDTA (pH 8.0), 1 µg poly(dI-dC), 10 mM dithiothreitol, and 10% glycerol (total reaction volume, 20 µl). Reaction mixtures were loaded onto a 5% native polyacrylamide gel that had been prerun for at least 1 h at room temperature. After electrophoresis, gels were fixed in 10% methanol-10% acetic acid, dried, and visualized by exposure to Kodak X-ray film or a Molecular Dynamics PhosphorImager plate.
Incubation of the LBS-1 probe with wild-type LANAC (LANAC WT) gave a robust LANAC-specific complex (complex A) (Fig. 1B, lane 3) that was not found when the probe was incubated with either unprogrammed reticulate lysate (lane 1) or the N terminus of LANA (lane 2). The same translation mixtures were incubated with the 181-bp probe incorporating both LBS-1 and LBS-2 (Fig. 1B, lanes 5 to 8). Again, LANAC WT (Fig. 1B, lane 7) formed specific complexes not found when the probe was incubated with unprogrammed reticulate lysate (lane 5) or LANAN (lane 6). From the literature (15), it is likely that the faster-mobility complex (complex A) consists of one LANAC dimer bound to high-affinity LBS-1, while the slower-migrating complex (complex B) is composed of two LANAC dimers, with each dimer occupying each site. The complexes often resolve as doublets and may suggest posttranslational modifications introduced by the lysates or possibly slightly different protein confirmations.
Next, we examined complex formation by a mutant version of LANACnamed LANACKK1113AAin which lysines 1113 and 1114 of the prototype sequence had been changed to alanine. This mutant was selected from a panel of alanine substitution mutants that will be described elsewhere and was chosen because of its increased affinity for TR DNA and altered gel mobility relative to that of the wild type. When mixed with the LBS-1 probe, LANACKK1113AA (Fig. 1B, lane 4) gave rise to a more robust complex than LANAC WT (lane 3). Both proteins were translated at similar levels as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) (Fig. 1D), and titration experiments indicated that the complex-forming activity of the mutant was approximately threefold greater than that of the wild type (data not shown). Note that the in vitro-translated LANAC proteins are predominantly full length. More significantly, there were marked and reproducible differences in the relative mobilities of the major complexes formed by the proteins, with that of LANACKK1113AA consistently running faster than that of LANAC WT. This difference was also evident when complex formation was assayed using the larger LBS-1 and LBS-2 probes (Fig. 1B, lanes 7 and 8). Three discrete complexes were observed with LANACKK1113AA, and the two slower-migrating complexes were unique to the LBS-1 and LBS-2 probes. The nature of the slowest complex is currently unclear and may reflect the recruitment of more than two LANAC dimers to a single DNA molecule. Similar complexes are sometimes observed with LANAC WT (data not shown).
We have previously shown that LANAC contains a self-interaction domain (39), and it is possible that the altered mobility of the mutant results from a difference in oligomerization state. We, therefore, asked whether LANACKK1113AA was competent to self-associate using a coimmunoprecipitation assay (Fig. 1C). Using the lipid transfection reagent PolyFect (QIAGEN), human HeLa cells were transiently transfected with expression plasmids encoding versions of LANAC WT and the mutant tagged with either FLAG or hemagglutinin (HA) epitopes. Twenty-four hours after transfection, protein extracts were prepared in high-salt lysis buffer containing 420 mM KCl, 20 mM Tris-HCl (pH 7.9), 10% glycerol, and 0.25% NP-40 and immunoprecipitated using anti-FLAG antibody-coupled agarose beads (Sigma). The resulting immunocomplexes were resolved by SDS-12% PAGE, transferred to a nitrocellulose membrane, and immunoblotted with an anti-HA monoclonal antibody (12CA5; Covance). As expected, HA-tagged LANAC WT was recovered in the presence of FLAG-tagged LANAC WT (Fig. 1C, lane 4) but not in the presence of FLAG-tagged LANAN (lane 3). The HA-tagged LANAC mutant was similarly coprecipitated in the presence of its FLAG-tagged version (Fig. 1C, lane 5), showing that the mutation does not prevent self-association. HA-tagged LANAN was not recovered with either FLAG-tagged protein (Fig. 1C, lanes 1 and 2), confirming that the observed LANAC interactions were specific. Direct immunoblotting of the starting extracts using either anti-FLAG or anti-HA antibodies showed that LANACKK1113AA was expressed at a slightly lower level than LANAC WT, thus accounting for the slightly reduced level of immunoprecipitated LANAC mutant protein. These results indicate that the observed differences in relative gel mobility of the protein-DNA complexes are not due to the inability of the mutant to oligomerize with itself.
LANAC bends DNA when bound to LBS-1. A number of virus-encoded initiators of DNA replication are known to bend origin DNA (4, 7, 8, 17, 24, 30, 33, 51). This raised the possibility that LANA might also bend DNA and that the KK1113AA mutation alters the extent of the induced bend. To determine if LANAC WT was capable of bending TR DNA, we adapted the EMSA for use as a CPA. In this approach, the relative mobility of a protein-DNA complex through the gel matrix is measured using a series of probes of identical lengths but in which the position of the binding site is moved relative to the probe ends (10, 50). If the binding of a protein causes the DNA to bend, then the migration rate of the resultant complex will vary depending on the position of the bend relative to the probe ends. Probes that are bent at one end exhibit a faster mobility during electrophoresis than probes bent near the middle. Furthermore, the extent and position of the bend can be calculated from the relative mobilities of the bound probes.
To generate an appropriate probe set, we inserted a 36-bp oligonucleotide spanning LBS-1 into the unique XbaI and HindIII sites of the plasmid pBEND2H (a gift from A. Stenlund, Cold Spring Harbor Laboratory, NY). This plasmid contains a duplicated polylinker and can be digested to release a series of probes of identical lengths (17, 48). The DNA was radiolabeled by PCR amplification in the presence of [
-32P]dCTP using the oligonucleotide primers Bend 1 (5'-TAGGCGTATCACGAGGCCCT-3') and Bend 2 (5'-CGTTAGCAATTTAACTGTGAT-3'), which anneal to sequences on each side of the permutated polylinker region. To improve the efficiency of amplification of the highly GC-rich LBS-1 sequence, the PCR was performed in the presence of 1 M betaine (20). After PCR, the amplification product was aliquoted and digested with eight different restriction endonucleases (Fig. 2A) to give a series of probes with an overall length of 157 nucleotides. The probe fragments were purified from template DNA and cleaved arms by native gel electrophoresis and eluted from the gel slices prior to incubation with in vitro-translated protein. The results of a representative CPA using LANAC WT (lanes 1 to 8) and LANACKK1113AA (lanes 9 to 16) are shown in Fig. 2B. All eight unbound probes migrated at similar rates, indicating that the probe DNA had little or no intrinsic curvature. In contrast, the LANAC-specific complexes showed an obvious difference in mobility depending on the position of the LBS-1 site relative to the ends of the probe. This result indicates that both versions of LANAC induce a significant bend in DNA upon binding.
![]() View larger version (46K): [in a new window] |
FIG. 2. LANAC bends DNA. (A) Design of probes used for the CPA. Sequences of LBS-1 and LBS-2 as determined by Garber et al. (15) are boxed, and the numbering follows that of the prototype TR sequence (GenBank accession no. U86666) (26). Probes were labeled by PCR in the presence of [32P]dCTP and digested at one of eight restriction endonuclease sites in the duplicated polylinker of pBEND2H, yielding probes of identical lengths but with the LBS at different positions relative to the ends. The center of the bend induced by the binding of LANAC WT to the LBS-1 probe was at guanine-581 (filled diamond); with LANACKK1113AA, the center of the bend was at guanine-580 (asterisk). (B) EMSA using 32P-labeled probe sets containing LBS-1 incubated with in vitro-translated LANAC WT (lanes 1 to 8) or the KK1113AA mutant (lanes 9 to 16). Bands correspond to the LANAC-induced complex (filled arrowheads), and unbound probes are indicated. (C) Plot of the relative mobilities of retarded complexes (mobility of a complex divided by the mobility of the free probe) compared to the position of an arbitrary reference point (cytosine-584 [underlined]) from the 5' end of each probe. The best fit to the cosine function curve was generated using SigmaPlot. The upper graph represents the relative mobility of LANAC WT. By extrapolation, the fastest-migrating complex corresponds to a probe with a reference nucleotide at position 75.3 within the 157-bp probe (95% confidence interval, 73.6 to 78.0). The predicted bend center should be equidistant from the ends of this probe and would therefore correspond to guanine-581. The lower graph shows the analogous mobility plot for LANAC KK1113AA. Minimal migration occurs when the reference point is at position 74.5 in the probe (95% confidence interval, 72.0 to 77.0) and thus predicts the bend center to be at guanine-580.
|
/2), where µM is the slowest-migrating complex, µE is the fastest-migrating complex, and
is the estimated bend angle (46). In essence, this equation compares the mobility of the complex bound in the middle of the probe, the slowest-migrating complex, with the mobility of the complex bound at the end of the probe, the fastest-migrating complex. Using measurements derived from six independent CPA experiments, we derived an estimated bend of 57° ± 3° for LANAC WT bound to LBS-1. This confirms that the binding of LANAC to a single high-affinity site induces a significant distortion in the DNA. The analysis was also applied to LANAC KK1113AA (Fig. 2A, lanes 9 to 16) and yielded an estimated bend angle of 57° ± 1.5°. In spite of the fact that both proteins give rise to protein-DNA complexes with different relative mobilities, the DNAs are bent to similar degrees. By plotting the mobility of each protein-DNA complex relative to the free probe (y axis) against the position of an arbitrarily chosen nucleotide from one end of the probe (x axis), we can extrapolate the position of LBS-1 that would give rise to the slowest-migrating complex (Fig. 2C, top graph). The center of the bend can then be predicted from the minimum of the cosine curve. Using measurements from six independent gel runs, we found that the center of the bend induced by the binding of LANAC WT to the LBS-1 probe corresponded to guanine-581 (Fig. 2A and C, upper graph). For LANACKK1113AA, the calculated bend center was at guanine-580 (Fig. 2A and C, bottom graph). Given the margin of error in these measurements, it is likely that the bend center for LBS-1 is the same for both proteins and lies within the core binding site and slightly to one side of the point of symmetry (9, 15, 41).
Additive increase in bend angle when LBS-1 and LBS-2 are occupied. Within each copy of the TR, the two LANA binding sites are separated by 22 bp center-to-center and thus lie on approximately the same face of the DNA helix. LANA binds to the two sites in a cooperative manner such that the occupancy of LBS-1 facilitates the recruitment of a second LANA multimer (most likely a dimer) to the adjacent lower-affinity site, LBS-2 (15). To examine the extent of the induced bend when both LANA binding sites are occupied, we subcloned a 60-bp oligonucleotide spanning LBS-1 and LBS-2 into the pBEND2H vector and performed CPAs as described above. As expected, incubation with LANAC WT gave rise to two major complexes corresponding to the occupancy of LBS-1 alone or of LBS-1 and LBS-2 (Fig. 3A, lanes 1 to 8). The occupancy of two sites was reduced compared to that of the single site, a consequence of the limited amount of biologically active LANAC WT protein in the reticulocyte lysate. In spite of the weaker signal, it was clear that the upper complex migrated in a semicircular pattern similar to that of the lower complex. Using this longer probe, the bend angle for the lower complex was estimated at 65° ± 5.5° (n = 3).
![]() View larger version (44K): [in a new window] |
FIG. 3. CPA using LBS-1 and LBS-2 probe sets. EMSA using a set of 32P-labeled probes containing LBS-1 and LBS-2 incubated with in vitro-translated LANAC WT (lanes 1 to 8) or the KK1113AA mutant (lanes 9 to 16) is shown. Specific complexes corresponding to the occupancy of LBS-1 (LANAC complex A, filled arrowheads) or LBS-1 and LBS-2 (LANAC complex B, open arrowheads) are indicated together with the unbound probes (Free LBS-1+2). A nonspecific complex is indicated with an asterisk. A representative pixel density profile (probe C incubated with LANAC WT, lane 2) is shown on the left.
|
LANAC bends DNA towards the major groove. Phasing analysis offers an alternative method to identify protein-directed DNA bends and can also be used to determine the direction of the bend (38, 53). This method relies on the phase-dependent interaction between the protein-induced bend under study and an intrinsic DNA bend incorporated into each of the probes. The spacing between these two bends is varied over a single helical turn in small increments so that at a particular spacing, the two bends will either be in phase (cis isomer) or out of phase (trans isomer) with each other. In the latter, the two bends will counteract each other, and the complex will migrate through the gel with the fastest mobility. As shown in Fig. 4A, an intrinsic bend was created by the insertion of a series of three adenine (A) tracts on one side of the probe. Each copy of the A tract bends the DNA towards the minor groove by 18°.
![]() View larger version (53K): [in a new window] |
FIG. 4. TR DNA is bent towards the major groove. (A) Design of phasing analysis probes. Oligonucleotides containing either LBS-1 or LBS-1 and LBS-2 were inserted between unique XbaI and HindIII sites of pBEND2H. To provide the intrinsic bend, a second oligonucleotide containing three A tracts (underlined) was inserted into the unique SalI site. The size of the spacer region was increased by PCR using a series of oligonucleotides spanning the ends of the LBS and A tract was used in a PCR to clone in the spacers. Subsequently, the center of the A tract is located 40 bp (3.8 helical turns), 42 bp (4.0 helical turns), 44 bp (4.2 helical turns), 46 bp (4.4 helical turns), 48 bp (4.6 helical turns), and 50 bp (4.8 helical turns) from the molecular bend center of G581 when the spacer lengths are 0, 2, 4, 6, 8, and 10 nucleotides, respectively. (B) 32P-labeled probes containing LBS-1 were incubated with in vitro-translated LANAC WT (lanes 1 to 6) or the KK1113AA mutant (lanes 7 to 12). Specific LANAC-induced complexes and the unbound probes are indicated. The numbers indicate the linker length inserted between LBS-1 and the A tract. (C) Phasing analysis using 32P-labeled probes containing LBS-1 and LBS-2 incubated with in vitro-translated LANAC WT (lanes 1 to 6) or the KK1113AA mutant (lanes 7 to 12). Specific LANAC-induced complexes A and B plus the positions of unbound probes are indicated. Spacer lengths are listed above the lanes.
|
-32P]dCTP, betaine, and the Bend 1 and 2 primers. Amplification products were digested with PvuII to remove excess vector sequences and gel purified. Each phasing probe (LBS-1 alone or LBS-1 and LBS-2) was incubated with in vitro-translated LANAC WT (Fig. 4B and C, lanes 1 to 6) or KK1113AA proteins (Fig. 4B and C, lanes 7 to 12), and the relative gel mobilities of the resultant protein-DNA complexes were measured by EMSA. Both LANAC WT and LANAC KK1113AA gave a robust complex with each of the phasing probes containing LBS-1 alone (Fig. 4B). As expected, the relative mobility of the LANA-induced complex was dependent on the number of additional bases inserted between the LBS-1 site and the three-part A tract. Insertion of 2 or 4 bp increased the mobility of the complex, whereas insertion of 6 or 8 bp reduced the mobility. By comparison, the unbound probes showed a linear relationship of mobility to probe length, confirming the absence of an intrinsic bend in the KSHV sequence. The distinctive sinusoidal behavior of the LANAC-induced complexes shows that the binding of either protein to LBS-1 induces a significant bend in the DNA. The slowest-migrating complex (8-bp insertion) corresponds to the cis isomer, and in this probe, the bend center is located 48 bp from the middle of the A tract. Assuming a periodicity of 10.5 bp per helical turn, this corresponds to 4.6 helical turns. In this orientation, the induced and intrinsic bends distort the DNA in the same direction. The fastest-migrating complex (trans isomer) was formed on the probe with a 2-bp insertion such that the centers of the two bends were separated by 42 bp or exactly four helical turns. Based on the bending at the center of the A tracts towards the minor groove of DNA, we can conclude that the LANAC-induced bend is directed towards the major groove. A similar sinusoidal mobility profile was observed using the LBS-1 and LBS-2 probe sets (Fig. 4C) for both the lower (LANAC complex A) and upper (LANAC complex B) complexes. The linker insertions are expected to have equivalent effects on single and double complexes because the binding sites are separated by 22 bp and are therefore in helical phase.
In conclusion, we have shown that the C-terminal DNA binding and dimerization domain of LANA bends TR DNA by a minimum of
57° at LBS-1 and to a similar degree at LBS-2. This is a property of other origin-binding proteins from both viral and bacterial systems, and it is likely that distortion of DNA within the origin is a necessary step in the initiation of DNA replication (8, 17, 24, 30, 33, 51). As noted by others, there are interesting parallels in the organization of the KSHV and EBV latent origins (22, 43). In EBV oriP, DNA replication initiates near the dyad symmetry element DS, which contains two pairs of EBNA1 binding sites (14). Each pair is composed of one high- and one low-affinity site separated by 21 bp center-to-center, analogous to the arrangement in KSHV, in which the centers of LBS-1 and LBS-2 are separated by 22 bp or two helical turns (15). EBNA1 has also been shown to bend the DNA within each binding site, and measurements using CPAs give values that are remarkably similar to those presented here with LANA. For high-affinity site 4, a single EBNA1 dimer bends the DNA by approximately 55°, increasing to a minimum of 88° when sites 3 and 4 are occupied (4). Evidence of bending is also seen in the structures of EBNA1-DNA cocrystals, in which the distorted B-form DNA wraps around the surface of the DNA-binding domain (5, 6). It is noteworthy that the bovine papillomavirus E1 and E2 initiator proteins also bend DNA (17). The structure of the core DNA-binding domain of E2 is similar to that of EBNA1, and the dimers induce a bend of at least 50° (19). One function of the induced bend at the bovine papillomavirus origin is to bring the transactivation domain of E2 into contact with the helicase domain of E1, a rate-limiting step in initiation (17, 44). It is possible that DNA architecture also facilitates interactions between LANA and cellular replication proteins such as ORC or the MCM complex, with its resident helicase activity.
Despite an obvious difference in the relative gel mobilities between complexes formed by the wild-type and KK1113AA versions of LANAC and LBS-1, the calculated bend angles and the location of the bend centers were very close, if not identical. At face value, this suggests that the mobility difference is due to the conformation of the protein moieties rather than the DNA probe; however, the calculated bend angles differ by 25° when LBS-1 and LBS-2 are occupied simultaneously. The reason for this discrepancy is not clear but might reflect differences in the interactions between the two dimers. So far, we have not observed a measurable defect in the ability of the KK1113AA mutant to support plasmid replication in transient assays (J. Hu, L.-Y. Wong, A. C. Wilson, and R. Renne, unpublished data). It is possible that the higher affinity of the KK1113AA variant for DNA compensates for the effects of the shallower bend or that the transient replication assay is simply not sensitive enough to detect subtle differences in the frequencies of initiation. In conclusion, the shared ability of LANA and EBNA1 to bend origin DNA may be a necessary step in creating a specific platform capable of recruiting ORCs and associated replication initiation factors.
This work was supported by funds from the Department of Microbiology and NIH grant GM61139-04.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2010 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»