Previous Article | Next Article ![]()
Journal of Virology, July 2005, p. 8625-8628, Vol. 79, No. 13
0022-538X/05/$08.00+0 doi:10.1128/JVI.79.13.8625-8628.2005
Copyright © 2005, American Society for Microbiology. All Rights Reserved.
Departments of Biomedical Engineering and Chemistry, Emory University and Georgia Institute of Technology, 1639 Pierce Drive, Suite 2001,1 Centers for Disease Control and Prevention, National Center for Infectious Diseases, Division of Respiratory and Enteric Viruses, Atlanta,3 College of Veterinary Medicine, Department of Infectious Diseases, University of Georgia, Athens, Georgia2
Received 3 November 2004/ Accepted 17 February 2005
|
|
|---|
|
|
|---|
RSV diagnostics for patient management needs to be sensitive, specific, and rapid, requiring direct detection of virus, viral antigens, or RNA, usually in nasopharyngeal specimens. RSV isolation in cell culture has been considered the reference method, followed by immunofluorescence assay or enzyme immunosorbent assay; however, results from virus isolation studies are not rapidly available for patient management, and immunofluorescence assay and enzyme immunosorbent assay are not sufficiently sensitive to detect infection in a substantial portion of patients. Serological studies require seroconversion and thus cannot be completed during the acute illness, and PCR assays may be affected by template contamination and false-positive results. We developed nanotechnology based on the principles of microcapillary flow cytometry and single-molecule detection (2, 12) to detect RSV rapidly and with high sensitivity. We used two types of fluorescent nanoparticles: (i) 40-nm carboxylate-modified fluorescent nanoparticles (G nanoparticles, 505/515; R nanoparticles, 488/685; Molecular Probes Inc.) and (ii) streptavidin-coated Quantum Dots (QDs, 488/605; QDC Corp.) (3). The microcapillary flow system is integrated with a fixed-point confocal microscope with a high-numerical-aperture 100x objective. At low concentrations, the photons emitted from the nanoparticles in the confocal probe volume (
2 fl) are spectrally separated and analyzed for coincidence of time of arrival at two avalanche photodiodes (13). To detect RSV, 40-nm fluorescent nanoparticles were coupled to either anti-RSV F protein (clone 131-2A; Chemicon International, Temecula, CA) or anti-RSV G protein (clone 130-2G; Chemicon) monoclonal antibodies (16) and allowed to interact with RSV, and the photons produced by laser excitation of the fluorophores passing through the confocal probe volume were detected in real time. The system operates on the concept that if two nanoparticles are free to move in a solution, photons generated by them will arrive at the detector at different times unless they are bound to the same target. This concept can be used to detect target molecules at low concentrations with high sensitivity and discriminate between aggregate particles. Traditional fluorescent dyes are less suitable as labels because they require excitation at two different wavelengths, making it difficult to ensure that all photon signals are generated from the same probe volume. QDs and FRET nanoparticles used in this system are better suited because they can be excited at the same wavelength while emitting at different colors, allowing dual-color, time-correlated detection of single molecules and single virus particles.
To confirm the specificity of nanoparticle detection, we examined reactivity to uninfected Vero cell lysate, and sucrose density-purified viruses RSV/A2, RSV
G (RSV mutant with G protein gene deletion), and parainfluenza virus type 3 (PIV3) propagated in Vero cells (17). Purified virus (105 PFU/ml) was incubated with R nanoparticles (anti-F protein) or G nanoparticles (anti-RSV G protein) as previously described (16). The microcapillary flow-based single-molecule detection system was used to detect very low levels and possibly single virus particles in solution based on the concept that at low concentrations of nanoparticles, coincident photons will be observed only if R and G nanoparticles bind to the same virus particle (Fig. 1a). A similar scheme was used to estimate relative amounts of virus surface protein expression (Fig. 1b); that is, if one type of virus particle has a higher level of protein expression on its surface, it is likely to bind more of that specific nanoparticle. Hence, the number of photons emitted in the same amount of time will be greater, resulting in higher intensity in the integrated photon count spectrum. This concept was used to compare the level of F protein expression on different RSV strains.
![]() View larger version (30K): [in a new window] |
FIG. 1. Schematic illustration of single-virus detection and surface protein determination. A virus bound with complementary nanoparticle-antibody probes flows into a confocal volume (confined by blue lines), where fluorescent nanoparticles are excited by a laser. The photons from green and red fluorescent nanoparticles are separated (spectra at the bottom) and analyzed for time correlation (coincidence). (a) The virus that does not bind to both probes (left) will not show coincidence signals (dotted lines), while the virus that binds to both probes (right) will produce time-correlated photons from the red and green detection channels. (b) When a single-color probe is used, the virus that binds to several probes (virus 1) will exhibit greater intensity in the integrated photon count spectrum. The bottom graph shows the expected trend in average intensity calculated from several photon count spectra.
|
G (Fig. 3) and did not detect substantial green channel signals or red and green coincidence signals, indicating the high specificity of nanoparticle detection. The results in Fig. 2 also indicate that the intensity of photon count signals may be used to estimate the relative level of virus surface protein expression. The increase in photon counts in red and the green channels reflects the number of nanoparticles reactive with virus surface proteins and is independent of coincidence signals. Thus, the photon count in the red or green channel is lower for PIV3 and RSV
G compared to RSV/A2 (Fig. 2 and Fig. 3).
![]() View larger version (37K): [in a new window] |
FIG. 2. Time-correlated coincidence signals for virus detection in solution. Forty-nanometer nanoparticles conjugated to RSV anti-F or anti-G protein monoclonal antibodies were used to produce red or green photon emission, respectively. PIV3, used as a control, produced low red or green photon counts and did not show coincidence signals (a), while coincident peaks were observed for the RSV/A2 (b). The time for detection was 8 s, and signals were acquired and analyzed in real time (without any delay).
|
![]() View larger version (42K): [in a new window] |
FIG. 3. Time-correlated coincidence signals for virus detection in solution. Forty-nanometer nanoparticles conjugated to RSV anti-F or anti-G protein monoclonal antibodies were used to produce red or green photon emission, respectively. RSV G, used as a control, produced low green photon counts, as expected, and did not show coincidence signals (a), while coincident peaks were observed for RSV/A2 (b). The magnitude of the red channel signal for RSV G was low compared to RSV/A2, suggestive of lower F protein expression compared to RSV/A2. The time for detection was 8 s, and signals were acquired and analyzed in real time (without any delay). a.u., arbitrary units.
|
G compared to RSV/A2 (Fig. 3). This finding is noteworthy as sequential 3'-to-5' transcription of the RSV genome is believed to result in higher levels of mRNA transcripts by genes most proximal to the 3' promoter end (7); thus, higher levels of surface F protein expression might be anticipated by RSV
G compared to RSV/A2. To address this result, we examined F protein expression on RSV
G, RSV/A2, and PIV3 using anti-RSV F protein monoclonal antibodies conjugated to QDs at the same concentration used for R nanoparticle detection. A representative experiment of more than three separate experiments is shown in Fig. 4, and the average intensity of photon counts obtained from 35 runs (8 s each) is shown in Fig. 5. The intensity average was calculated after removing peaks below 100 counts so that signals from single QDs were eliminated. The average was calculated by dividing the total peak intensity by the total number of peaks. As shown in Fig. 4, and similar to the results obtained for R nanoparticles (Fig. 2 and Fig. 3), the hierarchy of peak intensity for QDs that react with RSV F protein is RSV/A2 > RSV
G > PIV3
blank. It is possible that the lower level of F protein expression by RSV
G compared to RSV/A2 may be associated with altered gene expression levels linked to changes in the gene end termination signal that precedes the F protein gene, as changes in this region may affect downstream gene expression levels (18).
![]() View larger version (31K): [in a new window] |
FIG. 4. Measurement of RSV F protein expression on virus particles. QDs coupled with anti-RSV F protein monoclonal antibody and incubated with different viruses generated different photon counts based on anti-F protein nanoparticle aggregation. No signal above the unconjugated QD control was observed for PIV3. Differences in the signal intensities obtained between RSV/A2 and RSV G are suggestive of differences in the level of F protein expression.
|
![]() View larger version (22K): [in a new window] |
FIG. 5. Virus protein expression determined by average photon peak intensities. Photon counts were determined from 35 individual runs (8 s each) and averaged for each virus. The bars indicate the mean ± standard deviations.
|
R.T. acknowledges the Georgia Research Alliance, which provided support for R. Alvarez. This work was supported in part by grants from the National Institutes of Health (grants R01 GM60562 and P20 GM072069 to S.N.) and from the Georgia Cancer Coalition (Distinguished Cancer Scholar awards to S.N.).
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»