Previous Article | Next Article ![]()
Journal of Virology, March 2004, p. 3145-3148, Vol. 78, No. 6
0022-538X/04/$08.00+0 DOI: 10.1128/JVI.78.6.3145-3148.2004
Copyright © 2004, American Society for Microbiology. All Rights Reserved.
Laboratory of Virology, National Agricultural Research Center, Tsukuba, Ibaraki 305-8666,1 Institute for Protein Research, Osaka University, Suita, Osaka 565-0871,2 Division of Bio-Crystallography Technology, RIKEN Harima Institute, Sayo-gun, Hyogo 679-5148,3 National Institute of Agrobiological Sciences, Tsukuba, Ibaraki 305-8602, Japan,5 Department of Biosciences at Novum, Karolinska Institute, 14157 Huddinge, Sweden4
Received 26 August 2003/ Accepted 21 November 2003
|
|
|---|
|
|
|---|
It has recently been reported that the major capsid protein P3, produced by using a baculovirus expression system, had the ability to form single-shelled core-like particles (CLPs) in the absence of any other structural proteins (2). To identify the role of the amino-terminal region of the P3 protein in the conformation of RDV particles, a series of deletion mutants of P3 was produced by means of the expression system; we then analyzed the stability of the core particles obtained with these mutants in the presence of high concentrations of MgCl2.
To produce P3 mutants with deletions of amino acids 2 to 10, 2 to 29, and 2 to 52 (N10del-P3, N29del-P3, and N52del-P3, respectively), we designed the following primers: 5'-AACCATG11GCGTCTGAATTCAAAAGTGTC-3' (S3F/10-deletion), 5'-AACCATG30GAAGTATATAACATCCTCGAT-3' (S3F/29-deletion), and 5'-AACCATG53GTGTCACGTACTCCAATTCCT-3' (S3F/52-deletion). The numbers written as superscripts indicate the positions of the beginning of the amino acid sequence of each deletion mutant in the full-length P3 protein. Three types of deletion DNA were amplified by PCR with these primers and the reverse primer S3R-NcoI, as described previously (2). After digestion with the appropriate restriction enzyme, the PCR products were ligated into the transfer vector pBlueBacIII (Invitrogen, Carlsbad, Calif.). We determined the sequence of each resultant plasmid to confirm that the coding sequence of each deleted variant of S3 DNA was oriented appropriately with respect to the baculovirus promoter of the gene for polyhedrin.
We used linearized Autographa californica multiple nucleopolyhedrovirus DNA (Invitrogen) and the various transfer plasmids that encoded the amino-terminally deleted forms of P3 to cotransfect insect cultured cells derived from Spodoptera frugiperda (Sf9) in the presence of CellFECTIN (Invitrogen) in accordance with the manufacturer's instructions. We examined the expression of the deletion mutants of P3 by Western blotting with P3-specific antibodies. On the Western blots, deleted forms of P3 were detected at the expected positions (Fig. 1), indicating that the three types of amino-terminally deleted P3 proteins had been expressed correctly in the baculovirus system. To solubilize the expressed proteins, we mixed Sf9 cells that had been infected with recombinant baculovirus with BugBuster protein extraction reagent (Novagen, Madison, Wis.). After the mixture was incubated for 30 min at 25°C, it was centrifuged for 5 min at 30,000 x g and the supernatant was collected. Then, after density gradient centrifugation of the supernatant on 10 to 40% sucrose for 70 min at 94,500 x g, the banded material was collected and pelleted by centrifugation for 60 min at 155,000 x g. CLPs were observed after the expression of N10del-P3 and N29del-P3 (Fig. 2a) but not after the expression of N52del-P3 (Table 1). These results indicated that the amino-terminal region from residue 30 to residue 52 was essential for self-assembly. A comparison of the structures of N29del-P3 and N52del-P3 based on extrapolation of the wild-type P3 dimer structure (6) revealed that N52del-P3 had lost the
-helical domain from residue 32 to residue 51 (Fig. 3), suggesting that the amino acids in this region might be important for maintenance of the overall conformation of P3 or for the specific interactions between P3A and P3B that are essential for the self-assembly of CLPs.
![]() View larger version (40K): [in a new window] |
FIG. 1. Western blotting analysis of amino-terminally deleted variants of the P3 protein. P3 proteins lacking the amino-terminal 10, 29, and 52 amino acids were expressed by the baculovirus system in insect cells. Samples were fractionated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis and proteins were detected by Western blotting with P3-specific antibodies. Lane 1, purified RDV particles; lane 2, cell extract containing full-length P3; lanes 3, 4, and 5, cell extracts containing N10del-P3, N29del-P3, and N52del-P3, respectively. Mass markers and the mobility of P3 are indicated.
|
![]() View larger version (170K): [in a new window] |
FIG. 2. Electron micrographs of uranyl acetate-stained core particles. (a) CLPs of N29del-P3 that had been purified from Sf9 cells that had been infected with recombinant baculovirus. (b) Purified CLPs of N29del-P3 after treatment with 2.0 M MgCl2. Bars represent 100 nm.
|
|
View this table: [in a new window] |
TABLE 1. Stabilitiy of various particles in the presence of high concentrations of MgCl2a
|
![]() View larger version (192K): [in a new window] |
FIG. 3. Structure of the asymmetric dimer composed of P3A and P3B, as shown by this surface representation of the P3A molecule (right, gray) and the C -trace of the P3B molecule (left, green), as viewed from the inside of the virus particle. Regions involved in hydrogen bonding or in a salt bridge between the P3 monomers are colored orange (P3A) and red (P3B). The extent of each of the three deletions (residues 10, 29, and 52) is indicated. The figure was produced with the DINO visualization program (http://www.dino3d.org) and rendered with the Povray graphics program (http://www.povray.org).
|
To visualize the interactions and deletion points of the amino-terminal arm, the structure of the P3 asymmetric dimer as viewed from inside the core particle was reconstructed (Fig. 3) based on the atomic structure of the P3 core reported previously (6). This reconstruction clearly showed the interactions of P3A (Fig. 3, right) and P3B (Fig. 3, left) and the deletion positions of the amino-terminal arm of P3B. The P3 asymmetric dimer had 11 strong hydrogen bonds and 4 strong salt bridges within this arm among 19 strong H bonds and 12 strong salt bridges, respectively (Table 2). Thus, the total energies of P3A-P3B interactions were gradually reduced by the serial deletions of amino-terminal regions. These results suggest that the reduction in stability of the CLPs obtained with the amino-terminally deleted mutants was caused by the loss of the chemical bonds described above.
|
View this table: [in a new window] |
TABLE 2. Summary of the interactions between monomers in asymmetric dimers of reoviral proteinsa
|
We calculated the total energies of interaction of asymmetric dimers in reoviruses based on their atomic structure (Table 2) and found that asymmetric P3 dimers of RDV had a higher energy of interaction (207.3 kcal/mol) than those of the BTV VP3 protein (134.1 kcal/mol), and the amino-terminal region seemed to be responsible for this difference. In the case of N52del-P3 of RDV, which had lost the capacity for self-assembly, the total energy of the P3A-P3B interaction was less than half (92.2 kcal/mol) that of native P3. The relatively high energy of interaction associated with P3 dimers in RDV, due to the amino-terminal region of P3, might allow the core of RDV to be generated in the absence of other structural proteins. The requirement for an additional protein VP7 in BTV (3, 5) for the construction of the CLPs might be due to the low energy of the interaction between monomers that correspond to P3 in this virus. In reovirus, the capability of the formation of inner core particles with the core capsid protein
1, from which the amino-terminal 230 amino acids have been removed (energy of N230del-
1, 99.5 kcal/mol) (Table 2), might be owing to the assistance of the
2 protein (4).
Inside the P3 protein, RDV contains 25.7 kbp of dsRNA in 12 segments (7), the largest genome among dsRNA viruses studied by X-ray crystallography. It also contains the P1 protein, an RNA-dependent RNA polymerase, the P5 protein, a guanylyltransferase, and the P7 protein, a nonspecific nucleic acid binding protein. It is reasonable to consider that a large cavity is required to enclose the molecules involved in transcription. The sophisticated mechanism for the generation of tightly interacting dimers that allow the side-by-side binding of the very thin P3 proteins, which are only 2.5 to 4.5 nm thick (6), would be able to create a large cavity for packaging the nucleic acids and proteins described above.
|
|
|---|
1 is dispensable for particle assembly. J. Virol. 76:12211-12222.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»