Previous Article | Next Article ![]()
Journal of Virology, April 2003, p. 4060-4069, Vol. 77, No. 7
0022-538X/03/$08.00+0 DOI: 10.1128/JVI.77.7.4060-4069.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Viral Infections,1 Department of Neurovirology, Research Institute for Microbial Diseases, Osaka University, Suita, Osaka 565,2 Division of Infectious Diseases, Advanced Clinical Research Center, Institute of Medical Science, University of Tokyo, Minato-ku, Tokyo 108-8639, Japan3
Received 25 July 2002/ Accepted 20 December 2002
|
|
|---|
|
|
|---|
70°C) or treatment with denaturing agents, such as formamide, easily dissociates them (for a review, see references 10 and 19). Electron microscopic observation revealed that the two RNA molecules are linked symmetrically and the contact point of the dimer, called the dimer linkage sequence (DLS), is located near the 5' end of each RNA under partially denaturing conditions. It is likely that the presence of two genomes in one virion is advantageous for survival, providing an extra template that can be used when one RNA molecule is damaged and giving genetic variety to the progeny (11, 23). It has been suggested that the DLS in viral genomic RNA usually overlaps with a packaging signal (E/psi) (19). Therefore, it was difficult to assess whether viral RNA dimerization and packaging are independent events. The partial RNA fragments of the 5' region of a retrovirus genome transcribed and purified in vitro formed dimer molecules upon incubation in buffer without any proteins or cellular extract (19). Thus, the DLS has been inspected mainly by using in vitro transcription systems. In the case of human immunodeficiency virus type 1 (HIV-1), the 5' untranslated region just downstream of the splicing signal was first reported to be a DLS, because in in vitro systems, the RNA fragments lacking this region have impaired ability to form a dimer (3, 31, 42). Recently, several groups reported another site within the 5' untranslated region which was important for RNA dimerization in vitro. This site was located upstream of the 5' splicing signal and named the dimer initiation site (DIS) (25, 35, 36, 41). The DIS consists of a stem-loop structure with a conserved palindromic sequence at the top of the loop. Two palindromic sites have been suggested to make a contact point, forming a kissing-loop complex to initiate dimer formation (25, 35, 36, 41).
Several studies of RNA dimerization in HIV-1 particles (in vivo) have shown different features of the dimer. The viral nucleocapsid protein (NC) or Gag precursor protein is suggested to alter the secondary structure of the RNA molecule and to stabilize RNA dimers, like molecular chaperons (13, 14, 16, 17). It has been reported that a mutation introduced around the DIS/DLS site did not affect dimer stability in vivo (6, 9, 39) and that a region far from the DIS/DLS affected dimer formation in the retrovirus genome (39, 43). Electron microscopic observation revealed that the HIV-1 RNA genome contains a central DLS and additional loop structures within each monomer subunit (22), suggesting that HIV-1 RNA contains more than one contact point. Thus, there are many discrepancies between the in vitro and in vivo data on HIV-1 RNA dimerization.
Previously, several mutants were generated with a duplicated 5' region (1,000 bases) of viral genome containing the packaging signal-DLS region (E/DLS) at various ectopic positions of RNA, and their packaging abilities and dimer formation in the particles were examined (38). In the mutant virions, monomeric forms of virion RNA, which were totally absent from the wild-type virions, were observed. This suggested that the 5' region of the genome indeed plays an important role in RNA-RNA interaction during virion formation. In this study, we utilized this system to assess the exact location of the DIS/DLS of HIV-1. Portions of stem-loop U5/L or stem-loop 1 (SL1) were sequentially deleted, and the effects of these mutations on RNA dimerization and encapsidation efficiency were analyzed.
|
|
|---|
To construct pDDNBA, the plasmid pGEM-MM (38) was digested with BamHI and AccI and treated with T4 DNA polymerase, and an
0.5-kbp fragment including the 5' leader region of HIV-1 was isolated. This fragment was ligated into the T4 DNA polymerase-treated NheI site of pNL4-3 to construct pDDNBA. The fragment was in its original orientation.
To construct pdR/U5-BA, pdU5/L-BA, pdPBS-BA, and pdM-BA, the plasmids pdR/U5, pdU5/L, pdPBS, and pdM (34) were digested with NotI, treated with T4 DNA polymerase, and then digested with SpeI. Fragments of
1.5 kbp, from the 5' leader region to the gag region, were isolated from these plasmids and exchanged with the AatII-SphI fragment of pDDNBA to construct pdR/U5-BA, pdU5/L-BA, pdPBS-BA, and pdM-BA, respectively.
To construct pdLA1, a two-step PCR amplification was performed to introduce the mutation. The template for PCR was pNLdSpNc, which was generated by removing the SpeI-NcoI fragment of pNL4-3. The first pair of primers used was a sense primer, 432F (5'-GCAGCTGCTTTTTGCCTGTAC-3'), and an antisense primer, dLA1R (5'-GATTTTCCAACTGATCTGAGGGATCTCTA-3'), and the second pair was a sense primer, dLA1F (5'-TAGAGATCCCTCAGATCAGTTGGAAAATC-3'), and an antisense primer, 783R (5'-CCTTCTAGCCTCCGCTAGTC-3'). Two amplified fragments were isolated, mixed, and used for the second PCR with primers 432F and 783R to generate the mutated fragment. This fragment was digested with SacI and BssHII and inserted into the corresponding position in pNLdSpNc to construct pdLA1sub. The plasmid pdLA1sub was then digested with AatII and SphI, and an
3.0-kb fragment was isolated and inserted into the corresponding position in pNLNh and pDDNBA to construct pdLA1 and pdLA1-BA, respectively.
The mutant constructs pdLA2 or pdLA2-BA, pdLA3 or pdLA3-BA, and pdLB3 or pdLB3-BA were constructed by the same method as pdLA1 or pdLA1-BA but using different primer pairs. For pdLA2, the first pair was a sense primer, 432F, and an antisense primer, dLA2R (5'-CTGCTAGAGATTTTCGGATCTCTAGTTACC-3'), and the second was a sense primer, dLA2F (5'-GGTAACTAGAGATCCGAAAATCTCTAGCAG-3'), and an antisense primer, 783R. For pdLA3, the first pair was a sense primer, 432F, and an antisense primer, dLA3R (5'-CGAGATCTCCTCTGGCACCAGAGTCACACAAC-3'), and the second was a sense primer, dLA3F (5'-GTTGTGTGACTCTGGTGCCAGAGGAGATCTCG-3'), and an antisense primer, 783R. For pdLB3, the first pair was a sense primer, 432F, and an antisense primer, dLB3R (5'-GGGATCTCTAGTTCGGGCACACAC-3'), and the second was a sense primer, dLB3F (5'-GTGTGTGCCCGAACTAGAGATCCC-3'), and an antisense primer, 783R.
To construct pdLB2 and pdLB2-BA, the plasmid pNLdSpNc was amplified with primers 432F and dLB2R (5'-GTGCGCGCTTCAGCAAGCCGAGTCCTGCGTCGCCAACACAACAGAC-3'), and the amplified fragment was digested with SacI and BssHII and exchanged with the corresponding fragment of pNLdSpNc to construct pdLB2sub. The plasmid pdLB2sub was digested with AatII and SphI, and the resultant 3.1-kb fragment was isolated and inserted into the corresponding position in pNLNh and pDDNBA to construct pdLB2 and pdLB2-BA, respectively. The mutant constructs pdLB4 and pdLB4-BA were constructed by the same method as pdLB2 and pdLB2-BA but using 432F and dLB4R (5'-GTGCGCGCTTCAGCAAGCCGAGTTTACTTTCGCTTTC-3') as the primers.
The series of mutant constructs pdLC1, pdLC2, and pdLC3 and the series pdLC1-BA, pdLC2-BA, and pdLC3-BA were constructed similarly to pdLA1-BA or pdLA1-BA but with different primer pairs: dLC1F (5'-GGAGATCTCTCTCGGCTTGCTG-3') and dLC1R (5'-CAGCAAGCCGAGAGAGATCTCC-3'), dLC2F (5'-GGAGATCTCTCAGGACTCGGCTTGCTG-3') and dLC2R (5'-CAGCAAGCCGAGTCCTGAGAGATCTCC-3'), and dLC3F (5'-GGAGATCTCTCGACGCTCGGCTTGCTG-3') and dLC3R (5'-CAGCAAGCCGAGCGTCGAGAGATCTCC-3') were used for pdLC1 or pdLC1-BA, pdLC2 or pdLC2-BA, and pdLC3 or pdLC3-BA, respectively.
The construction of pS1, pBsS1, pBST2, and pBsT6 was described elsewhere (34, 39). These plasmids were digested with NotI, treated with the T4 DNA polymerase, and digested with SpeI. Fragments of
1.5 kb, from the 5' leader region to the gag region, were isolated and ligated with the AatII-SphI fragment of pDDNBA to construct pS1-BA, pBsS1-BA, pBsT2-BA, and pBsT6-BA.
To construct the mutant pdL1, a two-step PCR was performed using two pairs of primers. The first pair was 432F and dL1R (5'-CGCCCCTCGCCTCGCCGAGTCCTGC-3'), and the second pair was dL1F (5'-GCAGGACTCGGCGAGGCGAGGGGCG-3') and 970R (5'-GTATTTGTCTACAGCCTTCTG-3'). The plasmid pNLdSpNc was used as a template for amplification with these pairs of primers, and two amplified fragments were isolated and mixed. The mixed fragments were then used as templates for the second step of PCR with the primers 432F and 970R, and the amplified fragment was digested with SacI and AccI. The resulting 0.47-kb fragment was isolated and inserted into the corresponding position of pNLdSpNc to construct pdL1sub. The plasmid pdL1sub was digested with AatII and SphI, and the fragment containing the mutation was inserted into the corresponding position in pNLNh and pDDNBA to construct pdL1 and pdL1-BA, respectively.
Three additional plasmids, pGEM634, pGEM634T2, and pGEM634T6, were constructed as templates for in vitro transcription. Each of the plasmids pNLdSpNc, pBsT2, and pBsT6 was used as a template for amplification with the primers PBS-F (5'-AGTGGCGCCCGAACAGGGAC-3') and 1000R (5'-CTGTCTGAAGGGATGGTTG-3'). The amplified fragments were isolated and ligated with pGEM-Teasy vector (Promega) to construct pGEM634, pGEM634T2, and pGEM634T6, respectively.
Transfection.
293T cells (18) (
7 x 106) were seeded on dishes (diameter, 150 mm) on the day before transfection. Plasmid DNA (10 µg) was transfected into the cells using the calcium phosphate precipitation method (2). The day after transfection, the medium was replaced with fresh Dulbecco's modified Eagle's medium supplemented with 10% fetal calf serum.
Isolation of RNA from cytoplasm and virions. Forty-eight to 72 h after transfection, the medium and cytoplasmic RNA were collected concurrently as described elsewhere (32). Virions in the medium were collected by centrifugation (100,000 x g; 2 h), and the viral pellet was resuspended in TSE (10 mM Tris-HCl [pH 7.4], 100 mM NaCl, and 1 mM EDTA). The physical virus titer was determined using an enzyme-linked immunosorbent assay kit to quantitate CA-p24 (ZeptoMetrix, Inc.). To isolate RNA from particles, virions were disrupted by the addition of sodium dodecyl sulfate (SDS) to 1% and treated with proteinase K (300 µg/ml) at room temperature for 60 min, followed by Tris-EDTA-saturated phenol-chloroform extraction, chloroform extraction, and ethanol precipitation.
Northern blotting analysis. Pelleted RNA was resuspended in T buffer (10 mM Tris-HCl [pH 7.5], 1 mM EDTA, 1% SDS, 100 mM NaCl, and 10% formamide), and the thermostability of dimeric viral RNA was determined by incubating RNA aliquots for 10 min at the temperatures indicated in Fig. 2 (39). The proportions of the dimer and monomer were measured by electrophoresis at room temperature on a nondenaturing 0.75% native agarose gel in 0.5x Tris-borate-EDTA buffer (29). Field inversion gel electrophoresis was performed for better separation of large RNA molecules. The conditions for field inversion gel electrophoresis were as follows: forward, 5V/cm and 0.6s; reverse, 5V/cm and 0.1s. The agarose gel was then treated with 10% formaldehyde at 65°C before being washed with H2O three times, and the RNA was blotted electrically onto a Hybond-N+ nylon membrane (Amersham Pharmacia Biotech UK, Ltd.).
![]() View larger version (45K): [in a new window] |
FIG. 2. Dimerization and packaging efficiencies of various deletion mutants of the U5/L stem-loop. (A) Schematic secondary structure of the HIV-1 U5/L stem-loop. (B) Diagrams of U5/L stem-loop deletion mutants. The lightly shaded lines represent deleted areas of RNA. (C) Representative ImageGauge image of RNA detected by Northern blotting. The positions of dimeric and monomeric viral RNAs are indicated by solid and open arrowheads, respectively. The various temperatures at which aliquots were incubated are indicated for the wild-type (WT) lane. The D value and relative packaging efficiency of each mutant are shown below each blot. The packaging efficiencies were calculated from results for the mutants, which do not contain a second copy of E/DLS. The results represent means ± standard errors from at least three independent experiments. Lane U, unheated sample.
|
RNase protection assay.
The antisense probe (
108 cpm/mg) was synthesized by transcription of pGEM(600-1000) (33), pGEM634, pGEM634T2, and pGEM634T6 with T7 RNA polymerase (New England Biolabs) or by transcription of pT7HIV-1 410-910 (39) with SP6 RNA polymerase (Promega) following linearization with NotI [pGEM(600-1000)], SpeI (pGEM634, pGEM634T2, and pGEM634T6), or SalI (pT7HIV-1 410-910) as described previously (30). To serve as size markers for denaturing polyacrylamide gels, HpaII-digested fragments of pGEM3Zf (+) were 32P end labeled (30). One-fifth of the virion-associated RNA or 10 µg of the cytoplasmic RNA preparation was mixed with 8 x 104 Cerenkov counts of 32P-labeled antisense RNA and precipitated with ethanol. RNase protection assays were performed using an RPA III RNase protection assay kit (Ambion, Inc.). After electrophoresis in 5% polyacrylamide- 8 M urea gels, the quantitation of various protected RNA species was achieved with the BAS1000 imaging plate system and ImageGauge software. The relative packaging efficiency was calculated by the following formula: relative packaging efficiency = (unspliced RNA of the mutant in virion/that in cytoplasm)/(unspliced RNA of the wild type in virion/that in cytoplasm).
The antisense probes from pGEM634, pGEM634T2, and pGEM634T6 were used to distinguish viral RNA of BsS1, BsT2, and BsT6, respectively, from that of the wild type. The probe from pT7HIV-1 410-910 was used to detect viral RNA of dR/U5 and dLB3. Other mutant RNAs were detected by the probe from pGEM(600-1000).
|
|
|---|
We first constructed a plasmid called pDDNBA, a derivative of pDDN, for clearer identification of the DIS/DLS and easier manipulation of the mutant construction. The duplicated region of pDDNBA was 405 bases long, including all seven stem-loops at the 5' end of the HIV-1 genome, whereas that of pDDN was >1,000 bases long, from the 5' end to the middle of the gag gene. Polyadenylation signals and primer binding sites (PBS) in the ectopic fragment on pDDNBA were deleted to abolish undesired polyadenylation and ectopic initiation of reverse transcription. 293T cells were transfected with pDDNBA, and progeny virions were collected from the supernatant. The RNA encapsidation and dimerization abilities of the virions were compared with those of pDDN and the wild-type, pNLNh. The RNA-packaging efficiency of DDNBA was comparable to those of DDN and NLNh, and its RNA dimerization profile was indistinguishable from that of DDN. Therefore, the first 405 bases from the 5' end of the HIV-1 RNA were sufficient to promote RNA-RNA interaction in virions (data not shown). Thus, we decided to use pDDNBA instead of pDDN as a progenitor of the mutants in the RNA dimerization assay. There were two E/DLS sites on the genome RNA of DDNBA, and we needed to decide which one would be mutated in this study. In a previous paper, it was speculated that the original E/DLS site on the mutant molecules worked more efficiently than the ectopic sites for the RNA-RNA interaction in the virion (37). In addition, we intended to observe the effect of the mutations on both dimerization and packaging efficiency. For packaging analysis, we have to use the mutants, which have only one E/DLS at the original position. Therefore, we decided to introduce mutations in the original E/DLS site of pDDNBA. For this purpose, we constructed the pDDNBA derivative plasmids pdR/U5-BA, pdU5/L-BA, pdM-BA, and pdPBS-BA, in which stem-loops R/U5, U5/L, and SL1 and the PBS, respectively, were deleted (Fig. 1A). Each mutant contained the deletion in the 5' authentic E/DLS, whereas an additional E/DLS at the ectopic position was intact except for polyadenylation signals and the PBS, like pDDNBA. We compared the RNA dimerization profiles of these mutant virions to those of DDNBA and the wild type (Fig. 1B and C). The virion RNAs from dPBS-BA and dR/U5-BA formed monomeric RNA at low temperature, similar to that of DDNBA. This result indicated that the PBS and stem-loop R/U5 do not help to promote RNA-RNA interaction in virions, and we concluded that these regions were not included in the DIS/DLS at all. On the other hand, the RNAs produced by dU5/L-BA and dM-BA contained very little monomer, similar to that of the wild type. This result indicated that the U5/L and SL1 stem-loop regions are important for the formation of dimeric RNA in virions.
![]() View larger version (52K): [in a new window] |
FIG. 1. Impact of a stem-loop deletion of the 5' region of HIV-1 RNA on genome dimerization. (A) Diagram of the prototype plasmids NLNh and DDNBA and the 5' regions of the stem-loop deletion mutants. The dotted lines represent deleted areas of RNA. (B) Representative ImageGauge image of RNA detected by Northern blotting. Aliquots of RNA extracted from virions were resuspended in T buffer, incubated for 10 min in parallel reactions at various temperatures, and then analyzed on a native agarose gel. The positions of dimeric and monomeric viral RNAs are indicated by a solid and open arrowhead, respectively. The various temperatures at which aliquots were incubated are indicated for the wild-type (WT) lane. Three or more independent experiments gave similar results. The relative packaging efficiency of each mutant is shown below its blot. The packaging efficiencies were calculated from the results for the mutants, which do not contain a second copy of E/DLS. The relative encapsidation efficiencies were calculated as the ratio of the amount of mutant genomic RNA to that of the wild type (pNLNh) in the virions, with normalization to the cytoplasmic levels of the two RNAs. The results represent means ± standard errors from at least three independent experiments. (C) Thermal-dissociation kinetics of dimeric viral RNAs shown in panel B. A schematic figure for dimer/monomer calculation is shown on the left. Each lane of the blot was separated into two parts, dimer or larger and monomer or smaller molecules. The relative amounts of monomeric and total RNAs in each lane were quantitated with ImageGauge, and the percentage of the total represented by monomeric RNA was calculated for each RNA sample. Lanes U, unheated samples.
|
The RNA profile from dLB3-BA showed that the introduced deletion had an intermediate effect on dimer formation (Fig. 2C). Since the ratio of monomer content to the total RNA of the virion produced from DDNBA varied slightly from experiment to experiment, we developed the following formula to give an index value of the dimer formation ability (D) of each mutant, to compare the effects of the mutation of the DLS area more quantitatively: D = (Mu - W)/(BA - W), where W, BA, and Mu represent the ratios of the monomer content to total the RNA of virions produced from the wild type, DDNBA, and each mutant based on the DDNBA construct at room temperature. The D value of the wild type is 0, and that of DDNBA is 1. When the mutation severely affects dimer formation, the monomeric genome content of the virion is reduced, and D becomes close to zero. Thus, the D value was expected to represent the magnitude of the effect of the mutation on RNA-RNA interaction in virions. We applied this formula to the results of the dimerization assay of the mutants dLA1-BA, dLA-2BA, dLA3-BA, dLB1-BA, dLB2-BA, and dLB3-BA. As shown in Fig. 2C, the values for the dLA1-BA, dLA2-BA, and dLA3-BA mutants were close to 1, while that for dLB2-BA was
0.8 and that for dLB4-BA was
0.25. The D value for dLB3-BA was
0.6. These results indicate that the formula is useful to show the relative efficiency of the RNA dimerization of each mutant quantitatively.
We also constructed three mutants which contained deletions within the 10 bases of the 5' side of the lower stem to assess the precise location of the DLS/DIS (Fig. 3). The deleted area of dLC1-BA is 10 bases of the 3' side of the lower stem (nt 687 to 696), which is the region deleted from dLB4-BA but still present in dLB2-BA. The upper and lower 5 bases of this area were deleted in dLC2-BA (nt 687 to 691) and dLC3-BA (nt 692 to 696). The RNA profiles of these mutant viruses were compared to those of DDNBA and the wild type, and D values were calculated (Fig. 3). The D value of the dLC1-BA mutant was
0.35. This value was slightly higher than that of dLB4-BA but still much lower than that of DDNBA. The D values of both the dLC2-BA and dLC3-BA mutants were
0.6, showing partial inhibition of dimerization. Thus, 10 bases just upstream of the SL1 stem-loop play an important role in mediating RNA-RNA interaction and/or in forming overall structure necessary for dimerization in virions.
![]() View larger version (21K): [in a new window] |
FIG. 3. Dimerization and packaging efficiencies of lower-stem deletion mutants of the U5/L region. Diagrams of deletion mutants are shown. The lightly shaded lines represent deleted areas of RNA. The D value and relative packaging efficiency of each mutant is shown below its diagram. The packaging efficiencies were calculated from results for the mutants, which do not contain a second copy of E/DLS. The results represent means ± standard errors from at least three independent experiments.
|
0.5. These results indicate that the hairpin loop and upper-stem region only partially contribute to dimer formation and that the entire stem-loop formation of the SL1 region is required for mediating RNA-RNA interaction in vivo. On the other hand, the ability to form a dimer was not altered by the hairpin loop mutations introduced into BsT2-BA or BsT6-BA (Fig. 4B). This means that enlargement of the hairpin loop does not affect dimerization. The ability to form dimers was also maintained after the upper-stem disruption introduced into the mutant S1-BA. This suggests that the upper-stem formation of SL1 is not required for RNA-RNA interaction.
![]() View larger version (16K): [in a new window] |
FIG. 4. Dimerization and packaging efficiencies of various SL1 mutants. (A) Schematic secondary structure of HIV-1 SL1 stem-loop. (B) Diagrams of SL1 stem-loop mutants. The inserted bases in BsT2 and BsT6 are indicated in large letters. The MluI recognition site introduced at the position where SL1 is deleted in the mutant dM is indicated in large italic letters. The D value and relative packaging efficiency of each mutant are shown below its diagram. The packaging efficiencies were calculated from results for the mutants, which do not contain a second copy of E/DLS. The results represent means ± standard errors from at least three independent experiments.
|
![]() View larger version (50K): [in a new window] |
FIG. 5. RNase protection assay measuring packaging efficiencies of pNLNh derivatives. The mutants were cotransfected into 293T cells along with the wild-type (WT), pNLNh. The cytoplasmic RNA from the transfected cells and the virion RNA were subjected to RNase protection analysis. The probe used was generated from pGEM(600-1000). This probe is complementary to a portion of the 5' untranslated region and the gag gene from pNLNh and is capable of distinguishing the wild-type and each mutant RNA. The amount of probe loaded on the gel was 1/500 of the amount of probe used in the experiment. The position of each diagnostic band for the viral RNA is indicated on the right of each gel. The numbers in parentheses represent the sizes (in nucleotides) of the protected bands of the mutants.
|
|
|
|---|
The first experiment gave clear-cut results (Fig. 1). The R/U5 loop and the PBS were not included in the DIS/DLS, whereas the SL1 and U5/L stem-loop regions played critical roles in genome dimerization. In subsequent experiments, we anatomized the U5/L stem-loop to identify the region responsible for dimer formation. Most of the U5/L stem-loop is not required, and only 10 bases of lower stem play an important role in inducing RNA dimerization. These results are consistent with recent reports suggesting the participation of the U5/L region in RNA dimerization in vivo (27, 40). We also found that the 5' side of the lower stem contributes partially to dimer formation (Fig. 2).
Unexpected results were obtained from the experiments with the SL1 stem-loop. Surprisingly, all SL1 mutants except dM-BA partially or fully retained dimerization activity. The mutant BsS1-BA lacks a palindromic sequence in the hairpin loop, so the initial interaction between the authentic and ectopic SL1 sequences on the same RNA would be ablated. BsT6-BA has a longer palindromic sequence (10 bases), which could potentially lead to more stable interaction between the two SL1 hairpins intermolecularly while intramolecule loop interaction would still be mediated by 6-base palindromic sequences. BsT2-BA contains an interrupted palindrome that might interfere with stable association between the two hairpins. Based on a previous analysis of mutants containing lesions in the hairpin loop (15, 28), the mutations in BsS1-BA and BsT2-BA would abrogate the homodimer formation of SL1 in vitro. Since it is believed that the palindromic sequence on the top of SL1 initiates dimer formation, BsS1-BA and BsT2-BA were expected to have a lethal defect in dimer formation. Nevertheless, BsT2-BA completely retained the ability to form dimers, and BsS1-BA partially retained the function. BsT6-BA and S1-BA were also unchanged in terms of dimerization. These results suggested that the contributions of the top hairpin loop and upper stem of SL1 to dimer formation are limited. Instead, the entire SL1 stem-loop, or possibly the lower stem of SL1, is required for complete RNA dimerization. In addition, the result for BsT2-BA clearly showed that the palindromic sequence on the hairpin loop of SL1 is not required for RNA-RNA interaction in the virion. In contrast, all SL1 mutations resulted in a reduction of packaging efficiency (Fig. 4B). Even the mutations that did not affect dimerization (BsT2, BsT6, and S1) caused some defect of encapsidation. These results indicate that the hairpin loop and top stem of SL1 are much more important in the generation of a packaging signal than in RNA dimerization. Consistent with this finding, Harrison et al. reported that SL1 stem corruption or loop deletion caused partial packaging and replication defects (20).
We have summarized the results in schematic functional maps (Fig. 6). It should be emphasized that there are parallel interrelations between DIS/DLS and E/psi in some regions presented. For example, complete deletion of SL1 resulted in a marked reduction of both dimerization and encapsidation abilities, whereas a top-stem truncation or top-loop deletion produced only a partial reduction of these two functions (Fig. 4B). Similarly, the mutations introduced in dLB4, dLC1, dLC2, and dLC3 affected, almost in parallel, the magnitudes of the packaging and dimerization functions (Fig. 2 and 3). Moreover, we could not find a region that is functional only for dimerization and not for packaging, whereas we observed regions functional for packaging but not dimerization (e.g., the entire R/U5 stem-loop or the upper region of the U5/L lower stem). In other words, the regions important for dimerization were always important for packaging. Previously, we reported that two E/DLS molecules are required but that dimerized RNA strands do not need to be packaged into HIV-1 virions (37). Taken together, our results strongly suggest that the RNA linkage structures and/or their interaction is required for packaging. We hypothesize that the RNA-packaging event consists of multiple steps and that RNA dimerization is one of the steps. We also assume that E/DLS RNA must be recognized as an intact packaging signal by viral protein only after a secondary or higher structure is formed by two E/DLS molecules. It should be noted, however, that the assumption that in our experimental system the intermolecular and intramolecular dimers are selected equally well for packaging is untested.
![]() View larger version (25K): [in a new window] |
FIG. 6. Functional mapping of the 5' region of HIV-1. The functional maps of RNA dimerization (top) and genome packaging (bottom) are shown separately. The shadowed open lines represent the areas dispensable for each function. The solid bold lines represent the areas essential for each function. The shaded lines represent the areas important for efficient functions. The dashed lines represent the areas not yet analyzed.
|
Our result with the mutants dLB3 and dLB4 (Fig. 2) showed that the contributions to dimerization of each side of the U5/L lower stem were not identical. This suggested that the primary structure rather than the stem structure in this region is important for mediating RNA dimer formation and/or that the lower stem region of the U5/L stem-loop might form differently. In addition, we could not deny the possibility that the large-deletion mutations might change the overall structure of the E/DLS region. The RNA structure model we used in this study was based on the Mfold program and is a relatively simple one (34). There is accumulating evidence that the HIV-1 leader RNA folds into a more complicated secondary, and probably tertiary, structure (4, 12, 21). However, the models currently suggested are based on in vitro experiments and/or computational analysis, and the HIV-1 RNA structure in vivo is still unclear. As our experiments were performed in an in vivo system, our data would thus be one of the clues to unveil the in vivo structures of E/DLS. The results of our DIS/DLS analysis contain some discrepancies from other reports using different systems (40). On the other hand, in a recent paper studying packaging signals in the U5/L stem-loop region (8), the regions shown to be necessary for encapsidation were quite similar to those in our results. These facts might also imply the complexity of E/DLS formation and structure in vivo.
HIV dimeric RNA is apparently stabilized by the action of NC protein in mature virions (13, 14, 16, 17). While we measured the extent of dimerization of the RNA in mature particles, the RNA is undoubtedly packaged without the stabilizing effect of free NC protein. It is at least a theoretical possibility that some RNAs are packaged without RNA-RNA interactions but are then converted to dimers by the action of NC when the virus matures. According to this strict approach, our data would suggest that the ability of the E/DLS region to form RNA dimers in mature particles is necessary but not sufficient for packaging.
In conclusion, we have demonstrated that the HIV-1 U5/L and SL1 regions could be a multifunctional domain and suggested that E/DLS dimerization might be an essential step for the genome packaging of HIV-1. As the region we have discussed was necessary but not sufficient for dimerization and/or packaging, more studies are under way to elucidate the minimum region required and sufficient for RNA dimerization of HIV-1 in vivo.
J.-I.S. was supported by The Organization for Pharmaceutical Safety and Research. This work was supported by grants from the Organization for Pharmaceutical Safety and Research; the Human Health Foundation; the Ministry of Education, Culture, Sports, Science and Technology; and the Ministry of Health, Labour, and Welfare, Japan.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»