Previous Article | Next Article ![]()
Journal of Virology, February 2003, p. 1984-1991, Vol. 77, No. 3
0022-538X/03/$08.00+0 DOI: 10.1128/JVI.77.3.1984-1991.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Department of Biochemistry and Biophysics, University of California, San Francisco, San Francisco, California 94143-0448,1 McGill University AIDS Centre, Lady Davis Institute-Jewish General Hospital, Montreal, Quebec, Canada H3T 1E22
Received 29 July 2002/ Accepted 1 November 2002
|
|
|---|
|
|
|---|
HIV-1 TAR forms a stable hairpin of 59 nucleotides (nt) and contains a 3-nt bulge and 6-nt loop in the upper part of the hairpin that are both essential for function (4, 18, 47). Tat binds primarily to the bulge region, utilizing one arginine within an arginine-rich RNA-binding domain (residues 49 to 57) to make a sequence-specific RNA contact and requiring surrounding charged residues to enhance binding affinity (1, 8, 37, 44, 48, 51, 55). In addition to its RNA-binding domain, Tat contains an activation domain (residues 1 to 48) that interacts with cyclin T1 and recruits the complex to TAR (5, 11, 23, 25, 30, 34, 56). In the context of cyclin T1, RNA binding specificity is extended to the loop and RNA binding affinity is enhanced, although it is not yet clear whether cyclin T1, Tat, or both proteins make loop-specific contacts (25, 45, 46, 56).
Bovine immunodeficiency virus (BIV) is a lentivirus related to HIV that causes persistent lymphocytosis in cattle (28). BIV encodes a TAR similar to that of HIV-1 and an analogous Tat protein that contains an arginine-rich RNA-binding domain (residues 68 to 81) and closely related activation domain (9, 19, 36). In contrast to the HIV-1 Tat-TAR interaction, however, the BIV RNA-binding domain recognizes BIV TAR with high affinity and specificity in a loop-independent manner and in the absence of cyclin T1 or other cellular proteins (2, 6, 14, 15). In the BIV complex, the peptide adopts a ß-hairpin conformation and utilizes eight amino acids to specifically recognize the bulge region of TAR (15, 43, 57). Another bovine lentivirus, Jembrana disease virus (JDV), encodes a Tat protein closely related to that of BIV (10, 13), and interestingly, its RNA-binding domain exhibits chameleon-like behavior that allows recognition of BIV TAR in the ß-hairpin binding mode or of HIV-1 TAR in the loop- and cyclin T1-dependent binding mode (49). Consistent with this observation is the finding that JDV Tat is able to activate the HIV-1 LTR in addition to its own LTR (12).
The structural comparisons among the HIV, BIV, and JDV Tat-TAR interactions and the observation that hybrid HIV/BIV TAR RNAs can be recognized in the two different binding modes (50) suggest that Tat-TAR interactions may readily evolve in actively replicating viruses where two or more binding modes are simultaneously maintained. To explore this hypothesis further and to develop a viral replication system in which new Tat-TAR interactions might be discovered, we have engineered hybrid HIV-1 proviruses with heterologous Tat-TAR interactions and have measured their replication properties. We show that the different binding modes all support robust viral replication, consistent with the view that Tat and TAR can coevolve to generate new binding specificities and different dependencies on host factors while maintaining functional intermediates.
|
|
|---|
tat) clones used in this study have been previously described (17). The Tat mutant has a deletion of the second nucleotide (U) of the initiation codon and an insertion of an MluI linker containing two termination codons. To engineer proviruses with heterologous Tat-TAR interactions, we reconstructed the R7/3 clones to facilitate replacement of the 5' and 3' TAR elements and inserted another tat gene (encoding HIV-1 Tat residues 1 to 72) into the Nef coding region, which has little effect on viral replication in tissue culture (17). These plasmid reconstructions also eliminated some flanking cellular sequences present in the original R7/3 proviral clones.
To facilitate provirus construction, the >9-kb HIV-1 genome was subcloned in three segments (5' LTR, 3' LTR, and central genome) by PCR of the R7/3 or R7/3
tat templates and cloning into the pGEM-11Zf(+) vector (Promega). The vectors designated 5'LTR were constructed with sense (5'-ACG CGT CGA ATT CTG GAA GGG CTA ATT C-3') and antisense (5'-ACG CGT CTC TAG ACC CAT CGA TCT AAT TC-3') primers and EcoRI and XbaI cloning sites (underlined). The vectors designated 3'LTR were constructed with sense (5'-ACG CGT CTC TAG ATT AGT GAA CGG ATC CT-3') and antisense (5'-GCT CTA GAG CGG CCG CTA GAG ATT TTC CAC-3') primers and XbaI and NotI cloning sites (underlined). The new tat gene (designated HIV tat 1-72) was amplified from pSV2tat72 (21) with sense (5'-ACT CTA GGC GCG CAT GGA ACC GGT CGA CCC GC-3') and antisense (5'-GAG CTT ACG CGTCAC TGT TTA GAC AGA GAA ACC TGG TGG GTC TGC GAT CCC TGC-3') primers and was cloned into the nef region of the 3'LTR vectors by digestion with BssHII and MluI (underlined) and ligation into the compatible MluI sites. The 5'LTR- and 3'LTR/tat 1-72 vectors were then combined to generate two-LTR vectors (also containing the inserted HIV tat 1-72 gene) by digestion and ligation of EcoRI-XbaI fragments. To complete the provirus clones, the central portion of the genome was cloned into the two-LTR vectors with ClaI-BamHI restriction fragments from R7/3 and R7/3
tat.
Hybrid proviruses were constructed in which HIV-1 TAR was replaced with the BIV, JDV, and H/B (defined below) TAR elements. Fragments containing the TAR elements were amplified from LTR reporter plasmids (50) with sense (5'-GAG AGC TGC ATC CGG AGT ACT TC-3') and antisense (BIV, 5'-GCT TTA TTG AGG CTT AAG CAG TGG GTT CCC TAG TTA GCC TCG GAG CTA ATG AGC TAC ACG AGG TCT AAC CAG AGA GAC CC-3'; JDV, 5'-GCT TTA TTG AGG CTT AAG CAG TGG GTT CCC TAG TTA GCC TCG GAG CTG TCA GCT ATC CAG AGG TCT AAC CAG AGA GAC CC-3'; H/B, 5'-GCT TTA TTG AGG CTT AAG CAG TGG GTT CCC TAG TTA GCC TCG GAG CTT CCC AGA GCT CAA CGA GGT CTA ACC AGA GAG ACC C-3') primers, digested with AflII and BspEI (underlined), and ligated into the 5'LTR and 3'LTR/tat 1-72 vectors. Plasmids were then combined as described above to generate the corresponding two-LTR vectors and proviral clones.
Hybrid proviruses were constructed in which the HIV tat 1-72 gene (inserted into the nef region) was replaced by fusion proteins containing the arginine-rich RNA-binding domains of BIV or JDV Tat (residues 65 to 81) in place of the RNA-binding domain of HIV-1 Tat (residues 49 to 57) (Fig. 1). The tat genes were amplified from fusion protein expression vectors (49) with sense (BIV, 5'-ACC AAA GCC CTA GGT ATC TCT TAC GGC AGC GGA CCG CGG CCT AGA GGT ACC AGA GGA AAG GGA AGG AGG ATC AGG AGA C-3'; JDV, 5'-ACC AAA GCC CTA GGT ATC TCT TAC GGC GGA AGA AGG AAG AAA AGA GGA ACC AGA GGA AAG GGG AGA AAA ATC CAC TAT C-3') and antisense (BIV, 5'-GAG CTT ACG CGT CAC TGT TTA GAC AGA GAA ACC TGG TGG GTC TGC GAT CCC TGC GGC GGT CTC CTG ATC CTC CTT CCC-3'; JDV, 5'-GAG CTT ACG CGT CAC TGT TTA GAC AGA GAA ACC TGG TGG GTC TGC GAT CCC TGC GGC GGA TAG TCG ATT TTT CTC CCC-3') primers, and fragments were extended with T4 DNA polymerase, digested with AvrII and MluI (underlined), and ligated into the 3'LTR/tat 1-72 vector. Proviral clones were constructed with all combinations of Tat fusion proteins and TAR elements by ligation of appropriate restriction fragments (Fig. 2).
![]() View larger version (27K): [in a new window] |
FIG. 1. Secondary structures of the upper stems of HIV-1, BIV, JDV, and H/B TAR RNAs. The boxes indicate conserved base pairs in the upper stem required for HIV-1 or BIV Tat binding, and the additional U:A base pair above this region (arrow) is important for BIV binding (50). The bulge architectures of the various RNAs are different. H/B TAR is a hybrid consisting of the HIV-1 loop (required for cyclin T1 binding) and the optimal BIV Tat binding site that is able to bind HIV-1 Tat in a cyclin T1-dependent manner and the BIV Tat RNA-binding domain in a ß-hairpin conformation (50). For the proviral constructs described in this paper, the lower portion of the HIV-1 TAR hairpin ( 20 bp not shown) was kept constant and only these upper regions were used to replace nt 20 to 42 of HIV-1 TAR. A schematic of the Tat protein structure is shown below. For the proviral constructs, the activation and C-terminal domains of HIV-1 Tat were kept constant and the RNA-binding domains shown were inserted to create the BIV and JDV fusion proteins.
|
![]() View larger version (35K): [in a new window] |
FIG. 2. Genomic arrangements of the HIV-1 proviral clones and chimeras. R7/3 is the proviral clone previously described (17), and R7/3 tat is defective for Tat expression. The tat gene from pSV2tat72 (21) was inserted into the nef region of the virus to restore a functional Tat in the R7Htat clone. The R7 tat clone does not have the tat gene inserted but is in the same vector background. Chimeric proviral clones containing BIV, JDV, and H/B TAR elements, and the BIV and JDV Tat fusion proteins, were constructed as described in Materials and Methods. Parentheses in the provirus nomenclature indicate the different individual chimeras.
|
Viral stocks were prepared by transfection of 293T cells with 10 µg of the various proviral plasmids in 100-mm-diameter culture plates by calcium phosphate precipitation. Supernatants were removed 2 days after transfection, filtered through 0.45-µm-pore-size polyethersulfone membranes, and stored in aliquots at -80°C for use as virus stocks. Levels of p24 capsid protein were determined by antigen-capture enzyme-linked immunosorbent assays (ELISAs) (Abbott Laboratories, Abbott Park, Ill.) according to the manufacturer's protocol, and equal p24 levels were used for subsequent infections.
HIV-1 infections were performed at 37°C with SupT1 (106 cells, 15 ng of p24) or MT-4 (106 cells, 4 ng of p24) cells in 2 ml of RPMI medium. After viral adsorption for 2 h, the cells were extensively washed to remove unadsorbed virus particles and cultured in 10 ml of medium. Cultures were split at a 1:10 ratio every 3 to 4 days. Virus replication was monitored by p24 ELISA and reverse transcriptase (RT) activity (31) assays with cell-free culture fluid at the indicated time points. Data are representative of three independent experiments.
Virus titer determination by immunofluorescence. We utilized an immunofluorescence assay in addition to p24 and RT assays to measure viral levels. Various amounts of infected cell culture medium were diluted to 250 µl and added to 104 U373-MAGI cells plated in chamber slides (performed in duplicate). Virus was adsorbed for 2 h at 37°C in 5% CO2, 1 ml of fresh culture medium was added, and cells were incubated for 48 h. After being washed with phosphate-buffered saline (PBS), cells were fixed in 1 ml of cold (-20°C) 50% methanol-50% acetone for 5 min and washed three times with PBS. An 0.25-ml quantity of mouse anti-p24 antibody (1:400 dilution; obtained from the AIDS Research and Reference Reagent Program; 183-H12-5C monoclonal antibody from Bruce Chesebro and Kathy Wehrly) was added for 1 h at room temperature, cells were washed three times with PBS, 0.25 ml of fluorescein isothiocyanate-labeled anti-mouse immunoglobulin G (1:400 dilution; RPC, Rochester, N.Y.) was added for 1 h at room temperature, and cells were washed three more times with PBS. p24-positive cells were counted by fluorescence microscopy, and values were normalized to the amount of culture supernatant used. Syncytia with multiple nuclei were counted as a single infected cell. Similar values were obtained by staining for ß-galactosidase in the U373-MAGI reporter cells (54) (data not shown), but the immunofluorescence assay was more sensitive and was used for quantitation.
CAT assays. Activities of the Tat fusion proteins expressed within the proviral clones were measured in chloramphenicol acetyltransferase (CAT) reporter assays. Fifty nanograms of an HIV-1 LTR CAT plasmid (containing HIV-1 TAR, BIV TAR, JDV TAR, or H/B TAR [49]) was cotransfected with 100 ng of a proviral plasmid into 293T cells with Lipofectamine (Gibco BRL, Gaithersburg, Md.). Total plasmid DNA was adjusted to 1 µg with pGEM-11Zf(+). Transiently transfected cells were collected by trypsinization after 48 h, extracts were prepared by three cycles of freezing-thawing (-80°C-37°C), and CAT activities were measured with an amount of extract adjusted to be within the linear range of the assay (7). Activities were quantitated with a Molecular Dynamics PhosphorImager, and levels of Tat activation were calculated relative to transfections with the reporter plasmids alone.
|
|
|---|
To examine the activities of the various Tat-TAR interactions in the context of viral replication, we constructed a set of matched HIV-1 viruses in which wild-type Tat was inactivated and hybrid Tat proteins containing the HIV-1 activation domain fused to the various RNA-binding domains were inserted into the nef region of the virus (Fig. 2). We also constructed viruses in which HIV-1 TAR was replaced by BIV TAR, JDV TAR, or H/B TAR (a hybrid RNA able to bind both HIV-1 and BIV Tat) (50) (Fig. 1 and 2). For the TAR replacements, the lower portion of the HIV-1 stem, which is not directly involved in Tat binding, was maintained. By placing the Tat-TAR interactions within the same HIV-1 background and making only small changes to Tat and TAR, we attempted to focus directly on how the mode of RNA binding influences viral replication and to minimize the possible effects of using different, albeit related, viral LTRs or Tat activation domains (12).
To ensure that the inserted Tat proteins were expressed in the proviral context, we first used a CAT reporter assay to monitor transcriptional activation and found that proviruses expressing HIV-1 Tat or JDV Tat RNA-binding domains were able to activate the HIV-1 promoter through HIV-1 TAR to similar, high levels, whereas the BIV Tat RNA-binding domain showed only low levels of activation (Fig. 3A), consistent with previous binding and activation studies. Tat expressed from the nef location functioned as well as that from its wild-type location (compare R7Htat to the parental R7/3 provirus [Fig. 3A]), and proviruses not expressing Tat (R7
tat and R7/3
tat) did not activate the reporter. Additional CAT assays with BIV, JDV, and H/B TAR reporters showed activation only with proviruses having the appropriate RNA-binding domain (data not shown). In addition, transient transfection of 293T cells (nonpermissive for infection) showed that proviruses encoding the HIV-1 and JDV Tat domains expressed significant levels of p24 whereas a provirus encoding the BIV domain expressed only background levels (Fig. 3B).
![]() View larger version (40K): [in a new window] |
FIG. 3. Transcriptional activation and p24 expression mediated by Tat hybrid proteins engineered into proviral plasmids. (A) Levels of activation measured in a CAT reporter assay. 293T cells were cotransfected with an HIV-1 LTR-TAR CAT reporter plasmid and variant proviral plasmids expressing HIV-1 Tat or HIV-BIV or HIV-JDV Tat hybrid proteins. CAT activities were quantitated 48 h after transfection, and fold activation was calculated by dividing the amount of CAT activity in the presence of Tat by the amount in the absence of Tat. The inset shows the results of a representative CAT assay, with some points out of the linear range of the assay. For quantitation, assays were repeated with an appropriate amount of cell extract. (B) Levels of p24 expression following transient transfection. 293T cells were transfected with 10 µg of each proviral DNA by calcium phosphate precipitation, and p24 levels in the culture supernatant were measured by ELISA as described in Materials and Methods.
|
![]() View larger version (41K): [in a new window] |
FIG. 4. Replication of the chimeric viruses in U373-MAGI and SupT1 cell lines. (A) U373-MAGI-CD4+ cells were infected with a fixed amount of p24 from each viral stock, and the infectious titer was determined by counting the number of infected cells by p24 immunofluorescence (individual cells or syncytia were scored as single cells) and normalizing to the input p24 levels. (B) Syncytium formation in U373-MAGI cells by the chimeric viruses. Cells were fixed 48 h after infection and assayed by immunofluorescence (representative fields are shown at 20x magnification) or by X-Gal (5-bromo-4-chloro-3-indolyl-ß-D-galactopyranoside) staining of these reporter cells (data not shown; see Materials and Methods). (C) Replication kinetics of the parental R7/3 virus and HIV-1 TAR-containing viruses with various Tat proteins. SupT1 cells (106) were infected with fixed amounts of each virus (15 ng of p24), and replication was monitored by determining p24 levels in cell-free supernatants at the times indicated. Data are representative of three independent experiments.
|
12 days in SupT1 cells and at
4 days in MT-4 cells, with extensive cytopathic effect observed in the MT-4 cells. Virus production was eventually observed with the BIV Tat domain after 10 to 12 days of culture in MT-4 cells, and these viruses were characterized as described below. In the BIV TAR viruses, the BIV and JDV RNA-binding domains supported active replication while the HIV-1 domain did not (Fig. 5B), consistent with the high affinities of BIV and JDV Tat for BIV TAR (14, 49). Similarly in the JDV TAR viruses, the BIV and JDV, but not the HIV-1, binding domains supported replication (Fig. 5C), consistent with their known binding properties (49). In these JDV TAR viruses, the cognate interaction with JDV Tat was slightly better than that with BIV Tat, also consistent with the slightly higher affinity of JDV Tat peptides for JDV TAR (49). Finally, viruses engineered with H/B TAR, which can bind both HIV-1 and BIV Tat peptides, replicated efficiently with any of the three Tat proteins (Fig. 5D), although the virus with JDV Tat exhibited slightly slower kinetics in MT-4 cells. Thus, viral replication correlates with the affinity of the Tat-TAR interaction and can occur independently of the cyclin T1-TAR interaction in the context of HIV-1. |
View this table: [in a new window] |
TABLE 1. Infectivity of the chimeric viruses
|
![]() View larger version (41K): [in a new window] |
FIG. 5. Replication kinetics of the chimeric viruses in SupT1 and MT-4 cell lines. (A) Growth kinetics of viruses containing HIV-1 TAR, determined by assaying p24 levels in SupT1 cells and p24 and RT levels in MT-4 cells. Because HIV-1 grows rapidly in MT-4 cells and induces extensive cytopathic effect, p24 levels are considerably lower than those in SupT1 cells. (B) Growth kinetics of viruses containing BIV TAR. (C) Growth kinetics of viruses containing JDV TAR. (D) Growth kinetics of viruses containing H/B TAR. Data in each panel are representative of three independent experiments.
|
![]() View larger version (20K): [in a new window] |
FIG. 6. Growth and replication kinetics of a mutant virus with a change in the HIV-1 TAR loop, initially isolated as an escape mutant from MT-4 cells. (A) Secondary structure of the TAR loop and previously characterized L6 mutation (50). (B) Growth kinetics of the L6 mutant virus in MT-4 cells monitored by p24 assays. Significant replication of the R7Btat virus is observable by day 9, presumably reflecting accumulation of the L6 escape mutant, as in Fig. 5A. (C) Growth kinetics of the L6 mutant virus in MT-4 cells monitored by RT assays. Data in panels B and C are representative of three independent experiments.
|
|
|
|---|
The JDV Tat RNA-binding domain is especially interesting in that it is able to bind to both HIV-1 and BIV TARs in the two different binding modes (49). Here we have shown that the JDV Tat domain also supports viral replication through both TAR elements, consistent with a previous report showing that the full-length JDV Tat protein can substitute for HIV-1 Tat in viral replication (12). We have also shown that a hybrid TAR composed of the HIV-1 loop and BIV bulge region (H/B TAR) that is able to bind the HIV-1 and BIV domains in the two binding modes (50) supports replication with any of the Tat proteins. The generation of replication-competent viruses with mixed binding modes suggests that Tat-TAR interactions with rather different structural characteristics can readily evolve in a viral setting via multifunctional intermediates. In addition, the finding that HIV-1 TAR can be recognized by the BIV domain by mutation of a single loop nucleotide to create an extra base pair (the L6 mutant) (50), resulting in replication-competent viruses (Fig. 6), suggests that other simple pathways can be used to evolve new interactions that require only one or a few mutations and do not involve multifunctional intermediates. The selective pressure for the Tat-TAR interaction, the high mutation rate of HIV-1, and the relatively small changes needed to create new peptide-RNA interactions with the arginine-rich motif (20) apparently can provide multiple pathways to coevolve an RNA-protein interaction, as also emphasized by previous studies of TAR and Tat mutants (3, 33, 41, 52).
The substitution of the HIV-1 Tat-TAR interaction with the other lentiviral interactions described here suggests that a viral replication system may be used to select for novel Tat-TAR binding interactions. Indeed, we have been utilizing this strategy to identify TAR binding peptides from combinatorial libraries (unpublished data), with the intent of finding high-affinity binders that might ultimately be used to disrupt the Tat-TAR complex. Berkhout and coworkers (40, 53) have shown that there are both minimal and maximal levels of activation that can support viral replication, suggesting that such viral selection systems may require fine-tuning to identify the desired molecules. Nevertheless, the structural diversity of the lentiviral Tat-TAR systems provides an interesting opportunity to explore the evolution and possible utility of peptide-RNA interactions.
This research was supported by NIH grant RO1 AI29135 (A.D.F.) and by the Canadian Institutes of Health Research (M.A.W.).
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»