Previous Article | Next Article ![]()
Journal of Virology, June 2003, p. 6574-6579, Vol. 77, No. 11
0022-538X/03/$08.00+0 DOI: 10.1128/JVI.77.11.6574-6579.2003
Copyright © 2003, American Society for Microbiology. All Rights Reserved.
Division of Microbiology, School of Biochemistry and Molecular Biology, University of Leeds, Leeds LS2 9JT, United Kingdom,1 Electron Microscopy Centre and Department of Biology, Texas A&M University, College Station, Texas 778432
Received 4 September 2002/ Accepted 6 March 2003
|
|
|---|
|
|
|---|
Cap-independent initiation of translation was first described for picornaviruses (23). The uncapped 5' UTR of each of the picornavirus RNA genomes contains an ordered structure of 400 to 450 nucleotides (nt) that allows assembly of the translational machinery at a position close to or directly at the initiation codon. This interaction is independent of the nature of the extreme 5' end of the RNA as it does not require a cap structure and occurs when the sequence is inserted between the cistrons of an artificially constructed bicistronic mRNA. Most of the picornaviruses express a protease that specifically cleaves eIF4G, such that the portion of the protein that interacts with eIF4E (cap-binding protein) is removed from the domains of eIF4G that interact with the 43S ternary complex (17). Thus, upon infection with these viruses, host protein synthesis is blocked and the viral genome is translated without competition from cellular mRNAs for the required host components. The cleaved eIF4G (p100) is able to interact with the majority of picornavirus IRESs in the absence of the eIF4E-binding domain (6, 22, 24). This interaction may require noncanonical host factors.
The picornavirus IRESs have been classified into three types based on their primary and secondary structures (13). Enteroviruses and rhinoviruses have type I IRESs, whereas aphthoviruses and cardioviruses contain type II IRESs. These IRES groups differ in host protein requirements as well as in the positions of the initiation codons with regard to the entry sites. The IRES of hepatitis A virus (HAV) is distinct from that of other picornaviruses and makes up a group (type III) on its own. Infection with this virus does not result in cleavage of eIF4G, and translation from its IRES requires intact eIF4G as well as the presence of eIF4E (1, 5).
Following the initial characterization of picornavirus IRESs, other RNA viruses were shown to initiate translation internally. These include members of the family Flaviviridae, the pestiviruses (e.g., bovine viral diarrhea virus [9] and classical swine fever virus [CSFV] [29]) and hepaciviruses (e.g., hepatitis C virus [HCV] [31]), which contain IRESs located largely within the 5' UTRs but also involving sequences within the start of the coding regions (27). IRESs have also been identified within the coding regions of retroviruses (Moloney murine leukemia virus [32], simian immunodeficiency virus [21], and human immunodeficiency virus [8]), where they mediate translation of alternative open reading frames, and in cricket paralysis virus (33). Subsequently, the DNA virus associated with Kaposi's syndrome, human herpesvirus 8 (HHV8), has been shown to translate the FLICE inhibitory protein, FLIP, from an IRES situated within the v-cyclin coding region and extending into the FLIP gene (3, 11, 19).
The secondary structures of the IRESs of picornaviruses, pestiviruses, and hepaciviruses have been mapped by using a combination of biochemical and phylogenetic analyses. Recently, the proposed structural model of the HCV IRES has been confirmed and refined by using negative stain transmission electron microscopy (TEM) (2), cryo-electron microscopy (cryo-EM) (30), nuclear magnetic resonance (NMR) (16, 20), and X-ray scattering (14). However, such techniques have not been applied extensively to the characterization of the larger IRESs. We have developed a negative staining technique that allows imaging of large RNA structures by TEM, and this has enabled us to visualize and orientate the HCV IRES (2). This IRES forms an extended structure consisting of two major stems of 10 and 18 nm, formed by domains II and III, respectively (see Fig. 3a). A small spur of
2 nm is formed by the pseudoknot structure involving domains IIIf and IV. The images obtained in that study correlate well with a cryo-EM model of the HCV IRES bound to the 40S ribosomal subunit (30). Together, these results suggest that there is little alteration of the overall architecture of the HCV IRES upon binding to the 40S ribosomal subunit other than the loss of flexibility between domains II and III. The large size of virus IRESs together with the flexibility between stems makes it difficult to utilize NMR and X-ray crystallography to obtain high-resolution data. However, we have used TEM to visualize and compare the overall architecture of the HCV IRES with that of other IRESs of flaviviral origin and with those of the different types of picornavirus IRESs. We have also compared the morphological appearances of these IRESs from RNA viruses with that of a recently described RNA sequence with IRES properties that lies within a bicistronic mRNA encoded by the DNA virus HHV8.
![]() View larger version (51K): [in a new window] |
FIG. 3. Representative negative stain TEM images of flavivirus-like IRES transcripts, with diagrammatic depictions of the structures noted. (a) HCV. (b) HCV 5' UTR nt 119 to 156 (domains III and IV). (c) GBV-B. (d) CSFV. (e) GBV-C. (f) HHV8.
|
![]() View larger version (24K): [in a new window] |
FIG. 1. Proposed secondary structures of virus IRES elements from (a) HRV (type I picornavirus IRES) (4), (b) FMDV (type II picornavirus IRES) (24), (c) HAV (type III picornavirus IRES) (7), (d) HCV (12), (e) GBV-B (28), (f) GBV-C (28), (g) CSFV (10), and (h) HHV8 (3). The numbering of nucleotides on FMDV (b) and HHV8 (h) models is from the initiation codon. In all other models, numbering is from the 5' end of the corresponding viral genome.
|
![]() View larger version (32K): [in a new window] |
FIG. 2. Polyacrylamide gel analysis of transcribed IRES RNAs. The electrophoresed RNA was visualized by immersing the gel in 0.025% methylene blue for 1 h followed by destaining in several changes of tap water.
|
![]() View larger version (57K): [in a new window] |
FIG. 4. Representative negative stain TEM images of picornavirus IRES transcripts, with diagrammatic depictions of the structures noted. (a) Type II. (b) Type I. (c) Type III.
|
Flavivirus IRESs. The HCV IRES was previously shown by TEM to comprise two stems, one of 18 nm (stem a, equivalent to domain II) and one of 10 nm (stem b, equivalent to domain III), and a small spur of approximately 2 nm (stem c, equivalent to domain IV) (2). Little interaction between individual domains of the HCV IRES is required for the formation of this structure. A transcript representing nt 119 to 156 of the HCV 5' UTR was examined to determine whether domain III of HCV can form independently of domain II, as suggested by X-ray scattering and NMR studies (15, 30). The images obtained (Fig. 3b) indicate the formation of a long stem resembling domain III (18 nm) and a short spur, which most likely corresponds to the pseudoknot region. While this truncated IRES is not capable of driving translation initiation, it does associate with the 40S ribosomal subunit (30). The correct folding of domains III and IV in the absence of the remainder of the 5' UTR is likely to be necessary for this interaction. The precise role of domain II in HCV IRES-driven translation has yet to be established.
Related viruses within the Flaviviridae family are predicted to have secondary structures broadly similar to that of HCV. To determine whether these predicted structural similarities are observable in the folded RNA, we compared images of the HCV IRES with those of GBV-B (Fig. 3c) and GBV-C (Fig. 3e) IRESs and with images of the IRES of the more distantly related pestivirus CSFV (Fig. 3d). In these negative stain images, the RNA structures appear unstained on a darkly stained background. The GBV-B IRES is very similar to the HCV IRES, comprising two stems of 18 to 20 nm (stem a) and
10 nm (stem b). However, no small spurs were detected in these molecules. The GBV-C IRES also consists of two stems, but the molecules differ from those of HCV and GBV-B IRESs in that the stems are of similar lengths (18 nm) and there appears to be more flexibility within each stem. The CSFV IRES is also very similar to the HCV IRES, being composed of two major stems of 18 nm (stem a) and 8 nm (stem b).
Thus, all of the flavivirus IRESs examined appear as forked structures with two long stems flexibly linked at their bases by a domain that frequently contains a pseudoknot. A small spur domain, which may be formed by the predicted pseudoknot, can sometimes be seen at this junction. It is likely that the longer stem, stem a, corresponds to domain III in the predicted models of GBV-B and CSFV IRES elements. The predicted structure of the GBV-B IRES differs from that of the others in that domain II is thought to comprise three distinct stem-loops. However, these additional stems are not apparent in the EM images of the GBV-B IRES and it is possible that they are stacked to form stem b and therefore not distinguishable as individual domains.
The predicted model of the GBV-C IRES structure differs from that of the HCV IRES in that domain II is larger, forming a single stem-loop similar in length to domain III, and a pseudoknot structure may form between the domains. This model is supported by our EM images that show double-stemmed structures with arms of similar lengths.
HHV8 IRES. The flavivirus and picornavirus IRESs are all located within the 5' UTRs of their respective genomes, and these elements appear to be structurally conserved within the viral families. HHV8 is the only DNA virus that has been shown to encode an IRES, which is located in the intercistronic region of a bicistronic mRNA. Again, EM revealed structures of defined morphologies which bore a remarkable similarity to the HCV IRES, although they were of smaller size (Fig. 3f). The structures comprised two stems measuring 12 nm (stem a) and 5 nm (stem b), with a flexible hinge region between. The longer of the two stems may relate to domain II in the predicted structure (Fig. 1h). This IRES is the smallest to be analyzed by EM, and its small size and simplicity may reflect the fact that the RNA on which this structure resides is used only for translation and not replication.
Picornavirus IRES types. The picornavirus IRESs are significantly larger than those of the flaviviruses, typically comprising 450 nt. In an earlier study we showed that the type II IRES of foot-and-mouth disease virus (FMDV) forms an f-shaped structure with a large backbone decorated by two side stems (2) (Fig. 4a). Identification of known polypyrimidine tract binding protein binding domains by immunogold labeling and negative stain EM allowed us to predict the tertiary interactions between domains. In the proposed model, domain III forms the backbone of the structure (stem a-b) and stem c, with domain II at the base of stem a-b and domain IV rotated and stacked on domain III to form the protruding stem d. This model is in agreement with the results of biochemical analysis of interactions between individual domains of the FMDV IRES (26), which show that domains IV and V interact strongly with domain III but not with domain II.
The overall structure of the type I, HRV IRES element closely resembles that of the FMDV IRES, consisting of a long stem (36 to 48 nm) and two protruding stems (stems c and d) (Fig. 4b). However, there are differences in the relative lengths of stems c and d. While stem c consistently measures
8 nm, stem d has a more variable length of 10 to 20 nm. There is also more flexibility in the base of stem a-b of the HRV IRES than in that of the FMDV IRES. While it is conceivable that the backbone stem a-b involves the largest domain (IV), the differences in predicted models for the HRV and FMDV IRES elements make it difficult to speculate on the identities of the other stems and the tertiary interactions involved. There appears to be more flexibility throughout the HRV IRES than was seen in the other picornavirus IRESs studied. This is particularly noticeable in stem c and the upper portion of stem a-b.
The overall appearance of the HAV IRES also resembles that of the FMDV IRES (Fig. 4c). The long stem (stem a-b) measures approximately
30 nm and, again, is flexible at the base. The protruding stems have consistent lengths of
19 nm (stem c) and
7 nm (stem d); however, there does appear to be a little flexibility in stem d. The type III, HAV IRES has a proposed secondary structure similar to that of the FMDV IRES, and it is possible that the tertiary structure of this IRES is similarly constructed. As predicted for the FMDV IRES, stem a-b may be formed by domains IV and III, with the protruding stems c and d formed by the tops of domains IV and V, respectively. There appears to be some flexibility in the base of stem a-b of the HAV IRES, which may be due to the small stem-loop structure located between domains III and IV.
This study shows that the overall tertiary structures of IRES elements are generally similar within virus families in spite of there being very little sequence conservation. However, the ways in which these IRES elements are assembled may vary greatly, and we are addressing this uncertainty via the analysis by TEM of IRESs from which defined domains have been deleted. Conservation of tertiary structure appears to correlate with the requirements for noncanonical host protein factors during initiation of translation, the more elaborate picornavirus IRESs interacting with several more host factors than their flavivirus counterparts. Based on its small size and similarity to the flavivirus IRESs, it is tempting to speculate that the HHV8 IRES requires little in the way of host factors for efficient initiation of translation.
This work was funded by BBSRC project grant number 24/C13923.
|
|
|---|
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»