Previous Article | Next Article ![]()
Journal of Virology, October 2002, p. 10264-10269, Vol. 76, No. 20
0022-538X/02/$04.00+0 DOI: 10.1128/JVI.76.20.10264-10269.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
Institute of Immunology, Third Military Medical University, District Shapingba, Chongqing 400038, People's Republic of China
Received 12 April 2002/ Accepted 9 July 2002
|
|
|---|
|
|
|---|
Synthetic peptides corresponding to epitopes recognized by CTLs have been investigated as the basis of safe, effective vaccines (5). The cationic peptides represent a kind of synthetic DNA delivery system that is gaining increasing prominence in gene therapy (11, 19, 24, 37). These cationic peptides (e.g., oligolysine, [K]n) can bind to plasmid DNA through electrostatic interactions between the positively charged lysine residues and the negatively charged phosphate backbone of the DNA. This interaction forms highly condensed particles that protect the packaged DNA from the effects of nucleases and allow internalization by mammalian cells. Here, rationally combining the epitope-based peptide vaccine and the cationic-peptide DNA delivery system of gene therapy, we firstly designed a completely novel CTL vaccine-mimovirus, which is a kind of virus-size particulate antigen delivery system. In the present study, we designed and synthesized a cationic peptide composed of 18 lysines and a CTL epitope corresponding to residues 28 to 39 of HBsAg (H-2Ld restricted) (28, 31). Together with the plasmid containing mouse IL-12 gene, this cationic peptide can spontaneously form particles through electrostatic interactions at an appropriate charge ratio of peptide and DNA (Fig. 1). With a size equivalent to a virus, the particle contains a molecule of DNA literally packaged by presumably several thousands of antigenic peptides. And these particles may simulate the mechanisms of cell entry and DNA delivery used by viruses into mammalian cells including professional APCs such as DC. Therefore, we designated this kind of particle mimovirus, which might also mimic the immunogenicity of a virus in vivo to some extent. In our studies, the H-2d mice immunized with the mimovirus were shown to mount an effective, specific anti-HBsAg28-39 CTL response. Moreover, we demonstrated that both the particulate entity and the IL-12 gene transfer ability of mimovirus contributed to its effect of inducing the effective CTL responses in vivo.
![]() View larger version (14K): [in a new window] |
FIG. 1. Schematic diagram of forming a mimovirus model. A cationic antigenic peptide (PolyK-CTLepitope) was designed and synthesized to contain 18 lysines (K) and a CTL epitope HBsAg28-39 (H-2Ld restricted). Together with the plasmid containing the mouse IL-12 gene, this cationic peptide could spontaneously form particles through electrostatic interactions at an appropriate charge ratio of peptide and DNA. Due to many formal and antigenic similarities with virus, we designated this kind of particle mimovirus. PolyK, polylysine.
|
|
|
|---|
Peptide synthesis and characterization. The 30-mer cationic peptide N-[K]18IPQSLDSWWTSL ([K]18S12)and the 12-mer Ld-binding HBsAg28-39 peptide IPQSLDSWWTSL were synthesized in an Applied Biosystems peptide synthesizer model 431A (Perkin-Elmer, Foster City, Calif.), with purification and purity assessment by high-pressure liquid chromatography (HPLC) (Waters, Milford, Mass.). Mass spectrometric analyses of the peptides were performed using an API2000 electrospray ionization mass spectrometer (Perkin-Elmer). Amino acid composition analysis was performed using an ABI amino acid analyzer model 420A (Perkin-Elmer).
Plasmid DNA preparation.
For agarose gel electrophoresis and electron microscopy, plasmids were purified from transformed Escherichia coli strain DH5
by UNIQ-10 column plasmid minprep kit (Sangon, Shanghai, China). Plasmids used for gene transfer in vitro and for vaccination were prepared with the Qiagen Endofree plasmid maxi kit (Qiagen, Hilden, Germany), giving endotoxin levels less than 0.5 endotoxin unit/µg of DNA, as assessed by Limulus amebocyte assay (Chinese Limulus Reagent Ind., Xiamen, China).
DNA retardation and DNase I protection assay. DNA-[K]18S12 complexes (mimovirus) were prepared in microcentrifuge tubes by the addition of 1 µg of plasmid pIL-12 to serial dilutions of peptide [K]18S12 in 60 µl of HEPES-buffered saline (HBS) containing 10 mM HEPES and 150 mM NaCl, pH 7.4. To facilitate our calculation of the peptide/DNA charge ratio, we assumed that each lysine in peptide [K]18S12 carries one positive charge while each phosphate in DNA carries one negative charge. The peptide/DNA charge ratios were 0, 0.25, 0.5, 1.0, 2.0, 4.0, 8.0, and 16.0, respectively. The mixtures were vortexed and incubated at room temperature for 1 h. For DNA retardation assay, 15 µl of each complex was analyzed by electrophoresis on 0.8% agarose gels. For the DNase I protection assay, 5 µl of a solution of 10 mM MgCl2 and 10 mM CaCl2 was added to the 45 µl of each complex, followed by 5 µl of 0.5-µg/ml DNase I (Pharmacia Biotech) in water. After 30 min at 37°C, the reaction was stopped by addition of 4 µl of 0.5 M EDTA and heat inactivation at 65°C for 10 min. To dissociate the plasmid DNA from the peptide, 15 µl of 1% sodium dodecyl sulfate was added prior to extraction with Tris-EDTA-saturated phenol-chloroform, followed by ethanol precipitation and electrophoresis on 0.8% agarose gel. The integrity of DNA was compared with that of native DNA.
Transmission electron microscopy analysis. Samples were prepared by mixing 1 µg of plasmid pIL-12 with the peptide [K]18S12 at various peptide/DNA charge ratios in 50 µl of HBS. The mixtures were vortexed and incubated at room temperature for an hour and then processed for transmission electron microscopy using a negative stain technique (11). Briefly, 15-µl drops of aliquot of the mixtures were placed on glow-discharged carbon-coated 200-mesh copper grids for 3 min. Solution was wicked off with filter paper and replaced with 2% aqueous tungsten phosphate for 30 s. After removal of the solution, grids were rinsed in distilled water and allowed to dry. Grids were imaged in an H-300 transmission electron microscope (Hitachi).
Gene transfer studies. In a 24-well plate, P815 cells were seeded at a density of 5 x 104cells/well and incubated for approximately 24 h until 50 to 70% confluent. Three micrograms of plasmid pIL-12 was mixed, respectively, with peptide [K]18S12 at various peptide/DNA charge ratios or 15 µl of liposome DOTAP (Roche Molecular Biochemicals) in 50 µl of HBS. The control group included negative controlsno DNA (naked P815 cell), naked pIL-12, and pTCAE mixed with DOTAPand a positive control: pIL-12 mixed with DOTAP. The cells were washed and incubated for 30 min at 37°C in 1 ml of RPMI 1640 (10% fetal calf serum). Immediately after adding the DNA-peptide or DNA-liposome complexes to the cells, the cell culture plate was centrifuged at 400 x g for 5 min. After an incubation time of 6 h, the medium was replaced with 1 ml of fresh supplemented medium, and the incubation was continued for 48 h before the further analysis. The supernatants were harvested to detect the level of mIL-12 with enzyme-linked immunosorbent assay (ELISA) by using a commercial kit for IL-12 p70 (Endogen, Woburn, Mass.). All samples were assayed in triplicate.
Immunization of mice. For immunization, 75 nmol of peptide [K]18S12 was mixed with 20 pmol of plasmid pIL-12 or pTCAE in 500 µl of HBS at the peptide/DNA charge ratio of 4.0 to prepare two kinds of mimoviruses, respectively, named mimovirus-12 and mimovirus-T. Mice (five mice per group) were immunized subcutaneously at the tail base with 100 µl of mimovirus solution containing 15 nmol of peptide [K]18S12 and 4 pmol of each plasmid. As controls, mice were immunized with 15 nmol of peptide HBsAg28-39 and 4 pmol of pIL-12 or with only 15 nmol of peptide [K]18S12 in 100 µl HBS.
Cytotoxicity assay. Spleens were removed from immunized mice 8 to 10 days postimmunization. Single-cell suspensions of splenocytes were prepared using stainless steel mesh screens and red blood cell lysing solution (0.144 M NH4Cl, 0.017 M Tris [pH 7.6]), and cultured in the same medium as P815 cells. Responder cells (about 3x 107) were cocultured with 1 µM synthetic HBsAg28-39 12 mer peptide in 10 ml of medium containing human rIL-2 (20 U/ml; prepared in our laboratory) in upright 25-cm2 culture flasks in 5% CO2 at 37°C. After 5 days, cytotoxic effector populations were harvested. Serial dilutions of effector cells were cultured with 104 51Cr-labeled targets in 200-µl V-bottom wells. Specific cytolytic activity of cells was tested in 51Cr release assays against P815/S or HBsAg28-39 peptide-pulsed P815 targets or naked P815 as control targets. After a 4-h incubation at 37°C, 100 µl of supernatant were collected for gamma radiation counting. The percent specific release was calculated as [(experimental release - spontaneous release)/(total release - spontaneous release)] x 100. Total counts were measured by incubating target cells with 100 µl of HCl (2 M). In our experiments, spontaneous released counts always measured less than 15% of the total counts. Data shown are the means of triplicate cultures. The standard deviation of triplicate data was always less than 20% of the mean.
|
|
|---|
![]() View larger version (11K): [in a new window] |
FIG. 2. Analytical HPLC profile for peptide [K]18S12, using a low rate of 1 ml/min and a linear, binary gradient (30 ml) between 100% buffer A(0.1% aqueous trifluoroacetic acid) and 60% buffer B(0.1% trifluoroacetic acid-acetonitrile). The peptide(1 mg) was eluted at 38.2% buffer B and was monitored at a wavelength of 214 nm.
|
![]() View larger version (24K): [in a new window] |
FIG. 3. Agarose gel electrophoresis. (A) DNA retardation assay. The plasmid pIL-12 (1 µg) and several amounts of peptide [K]18S12 were mixed in 20 µl of HBS, followed by electrophoresis on a 0.8% agarose gel stained with ethidium bromide. The charge ratios (peptide/DNA) are indicated above. Marker represents the DNA size marker ( DNA/HindIII+EcoRI; Sangon). (B) DNase I protection assay. The plasmid pIL-12 was preincubated with the peptide [K]18S12 at the charge ratio indicated above, followed by treatment with DNase I as described in Materials and Methods. The integrity of the DNA was compared with that of native DNA.
|
![]() View larger version (64K): [in a new window] |
FIG. 4. Electron photomicrographs of mimovirus. Mimoviruses were prepared by mixing 1 µg of the plasmid pIL-12, respectively, with the peptide [K]18S12 at various peptide/DNA charge ratios in 50 µl of HBS. The methods used for electron microscopy are described in detail in Materials and Methods. Here we only show the appearance of the naked plasmid DNA (A) and that of mimovirus prepared at a peptide/DNA charge ratio of 4.0 (B). Bar = 200 nm.
|
![]() View larger version (26K): [in a new window] |
FIG. 5. Gene transfer effect of mimovirus in vitro. Mimoviruses were prepared by mixing 3 µg of plasmid pIL-12, respectively, with peptide [K]18S12 at various peptide/DNA charge ratios in 50 µl of HBS. P815 cells were incubated with the mimoviruses or controls for 6 h in a 24-well plate. The control group includes three negative controlsno DNA (naked P815 cell), naked pIL-12, and pTCAE (pT) mixed with DOTAPand a positive control: pIL-12 mixed with DOTAP. The medium was then replaced by 1 ml of supplemented medium, and the incubation was continued for a total of 48 h before the supernatants were harvested to detect the level of IL-12 by ELISA. The results of one of three similar experiments are shown here.
|
![]() View larger version (12K): [in a new window] |
FIG. 6. Inducing specific CTLs in vivo with mimovirus. BALB/c mice were immunized, respectively, with mimovirus-12 which was prepared by mixing peptide [K]18S12 with plasmid pIL-12 at a charge ratio of 4.0 (A), mimovirus-T which was prepared by mixing peptide [K]18S12 with control plasmid pTCAE at a charge ratio of 4.0 (B), HBsAg28-39 peptide and pIL-12 (C), or only peptide [K]18S12 (D). Splenocytes isolated 8 to 10 days after immunization and restimulated with HBsAg28-39 peptide in vitro for 5 days were employed as effector cells. Then, the standard 51Cr-release assays were made at three effector-to-target (E/T) ratios, with P815/S ( ) or peptide-pulsed P815( ) as the target of cytotoxicity and the naked P815 ( ) as the control target. Values of specific lysis are from one representative of three performed experiments and are presented as mean specific lysis of triplicate cultures.
|
|
|
|---|
Among a number of nonviral gene delivery systems, many cationic synthetic peptides containing several cationic amino acids have been employed, such as oligolysine (11, 37) and
-helical peptide (20, 21). Many studies have indicated that these peptides could bind to plasmid DNA and form small cationic particles or large aggregates with DNA competent to be internalized into cells via the endocytosis pathway. Furthermore, by conjugating certain receptor-binding ligands (domains) to these cationic peptides, a number of receptor-mediated gene delivery approaches have been developed (11, 24). Here we have designed and synthesized the antigenic cationic peptide [K]18S12, which contains 18 lysines and a CTL epitope, HBsAg28-39. By DNA retardation assay, DNase I protection assay, and transmission electron microscopy, we proved that [K]18S12 could bind to the selected plasmids to form condensed particles, namely, mimovirus, at an appropriate charge ratio of peptide and DNA. Like other cationic peptide delivery systems, mimovirus was shown to be able to transfer pIL-12 gene into mammalian cells such as P815 cells at least in vitro.
IL-12 has not only been suggested to induce production of IFN-
, then promoting Th1 polarization and CTL responses, but also has been suggested to play a major role in regulating the migration and proper positioning of effector cells (7, 34). In our present study, only mimovirus-12 was proved to be able to induce efficient CTL responses against HBsAg28-39. Considering the gene transfer effect of mimovirus shown in vitro, it is reasonable to speculate that mimovirus-12 might transfer pIL-12 into certain cells, probably including professional APCs, in vivo. Here it is worth noting a similar work reported by Irvine et al. during the preparation of our manuscript (13). They used complexes of plasmid DNA and the cationic peptide CL22, transfecting human or murine DCs much more efficiently than alternative nonviral agents.
Therefore, we concluded that both the particulate entity and the IL-12 gene transfer ability of mimovirus might contribute to its effect of inducing the specific CTL responses in vivo. The design of mimovirus rationally combined the epitope-based peptide vaccine approach with the cationic peptide gene transfer system. As a kind of particular vaccine, mimovirus may represent a novel, efficient delivery system for T-cell-epitope peptides to be targeted into professional APCs to facilitate the induction of potent immune responses. Furthermore, there still exists a great flexibility to further optimize the design of mimovirus by combining (via cationic peptides) any given plasmids encoding either lymphokines or antigens or both, with one or several kinds of functional peptides containing either epitope peptides or peptides targeting DCs or others. Considering its effectiveness, flexibility, and defined composition, mimovirus has the potential to be developed as an efficient vaccine strategy against tumors and intracellular pathogens, including human immunodeficiency virus.
This work was supported by National Key Basic Research Program of China (2001CB510001) and National Natural Science Foundation of China (NSFC no. 30170882).
We sincerely thank Yufang Shi of the American Red Cross for his kind help during the preparation of the manuscript.
|
|
|---|
receptor-mediated induction of dendritic cell maturation and major histocompatibility complex class I-restricted antigen presentation after immune complex internalization. J. Exp. Med. 189:371-380.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»