Previous Article | Next Article ![]()
Journal of Virology, August 2002, p. 7407-7417, Vol. 76, No. 15
0022-538X/02/$04.00+0 DOI: 10.1128/JVI.76.15.7407-7417.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
MRC Virology Unit,1 Division of Virology,2 Division of Biochemistry and Molecular Biology, Faculty of Biomedical and Life Sciences, University of Glasgow, Scotland, United Kingdom3
Received 1 February 2002/ Accepted 24 April 2002
|
|
|---|
|
|
|---|
The scaffolding proteins are encoded by the gene UL26 locus, which comprises two 3'-coterminal overlapping genes (UL26 and UL26.5) that encode proteins from a single open reading frame (26, 27, 43). UL26.5 maps to the 3' portion of UL26 and encodes pre-VP22a. UL26 encodes a protease, which cleaves itself at two positions known as the R (release) and M (maturation) sites. Cleavage at the R site generates two products. One of these, pre-VP21, shares amino acid sequences with pre-VP22a and is a minor scaffolding component, while the other, VP24, contains the protease activity. The M site is present 25 amino acids upstream from the C termini of both pre-VP21 and pre-VP22a (8, 26, 43). These C-terminal 25 amino acids include the residues that interact with VP5 (20), and cleavage of pre-VP22a at the M site, to produce the shortened form VP22a, destroys this interaction. This cleavage also triggers the reconfiguration of the spherical procapsid shell into the polyhedral form found in mature capsids (2, 14, 46). Three types of polyhedral capsid are generated, designated A (empty), B (intermediate), and C (full) (16). In B capsids the scaffold is retained, while A capsids contain no internal material. In C capsids the internal space is occupied by the viral genome. To accommodate the genome, the scaffold must exit from the capsids. However, since the available channels through the procapsid and capsid shells are too small to allow the passage of large structures, the effective size of the scaffold must be reduced. Therefore, mechanisms presumably exist to reverse the self-association of the scaffolding proteins. Studies of viral mutants suggest that DNA packaging and scaffold release are coordinated events that take place before or during the conversion from procapsids to polyhedral capsids (2, 40, 46) and that loss of scaffold takes place only in circumstances where DNA packaging is actively occurring (4). Under conditions where DNA packaging is blocked, only B capsids are usually formed (49). Since loss of scaffold appears to be closely linked to the actual process of DNA packaging, it seems likely that entry of the DNA itself into the capsid could be an important factor in the process. We speculate that the introduction of a large amount of negatively charged DNA into the interior of the capsid, by altering the ionic environment, affects the interaction of the scaffolding proteins. To investigate this process, we examined the structural integrity of purified scaffold particles under mildly acidic conditions and in the presence of low concentrations of urea, which appears to bring about analogous changes in the protein.
|
|
|---|
Purification of scaffold particles. Three-hundred-milliliter cultures of Sf21 cells at 106 cells/ml were infected at 5 PFU/cell with either AcUL26.5 or AcVP22a. After 48 h of incubation at 28°C, cells were harvested by centrifugation and the pellet was resuspended in 1/60 volume of phosphate-buffered saline (PBS) (170 mM NaCl, 3.4 mM KCl, 10 mM Na2HPO4, 2 mM KH2PO4, pH 7.2). Aliquots containing approximately 108 cells were pelleted and stored at -20°C until required. The method of scaffold purification was similar to that described by Newcomb et al. (33). Frozen aliquots were resuspended in 500 µl of PBS and subjected to five cycles of freeze-thawing in dry ice-methanol before the cellular debris was removed by centrifugation at 13,000 rpm in an MSE Microcentaur centrifuge. The supernatant was transferred to a fresh tube, and 90% saturated ammonium sulfate was added to a final concentration of 10%. The solution was mixed at 4°C for 30 min, and the precipitated proteins were pelleted by centrifugation at 13,000 rpm. The supernatant was discarded, and the pellet was resuspended in 0.5 ml of PBS. The suspension was layered onto a 13-ml 10 to 40% sucrose (in PBS) gradient and centrifuged in a Sorvall TsT41 rotor at 40,000 rpm for 1 h at 4°C. A single band was observed towards the middle of the gradient. This was removed and dialyzed against PBS to remove the sucrose. The sample was concentrated by dialysis against 40% polyethylene glycol in PBS and examined by electron microscopy. At each stage, aliquots were removed for sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis analysis.
Polyacrylamide gel electrophoresis. Samples were prepared for electrophoresis, and proteins were separated on SDS-10% polyacrylamide gels cross-linked with 2.6% (wt/wt) N,N'-methylene bisacrylamide (28). Proteins were either visualized after fixation by staining with 0.25% Coomassie brilliant blue or transferred to a Hybond ECL nitrocellulose membrane (Amersham Pharmacia Biotech) for Western blot analysis. Antibody binding was carried out as described by the manufacturer for the membrane protocol. Briefly, the membrane was incubated for 1 h with the appropriate mouse monoclonal antibody. For pre-VP22a and VP22a, MCA406 (Serotec Ltd.) was used at a dilution of 1:200. For VP5, DM165 (raised against purified VP5) was used at a dilution of 1:100. The membrane was washed and incubated for a further 1 h with a 1:1,000 dilution of goat anti-mouse immunoglobulin G-peroxidase conjugate (Sigma Immunochemicals). Bound antibody was detected by enhanced chemiluminescence (Amersham Pharmacia Biotech) according to the manufacturer's instructions.
Electron microscopy. For examination by negative staining, preparations of scaffold particles or capsids were diluted in PBS to a suitable concentration, applied to a Parlodion-coated microscope grid, and stained with 1% phosphotungstic acid (pH 7). Capsids to be examined in thin section were pelleted and then fixed and embedded as described previously (46). Sections were stained with saturated uranyl acetate in 50% ethanol and poststained with 1% lead citrate. All samples were examined in a JEOL 1200EX electron microscope.
Sucrose gradient analysis. Analysis was carried out on 5-ml gradients run on a Sorvall AH650 rotor (scaffolds) or on 13-ml gradients run on a Sorvall Tst41 rotor (capsids). Ten to 40% (wt/vol) sucrose gradients prepared in PBS that had been adjusted to the appropriate pH were formed using a Biocomp Gradient Master according to the manufacturer's instructions. All gradients contained 1 mM dithiothreitol (DTT) and were precooled to 4°C before use. The duration and speed of centrifugation were as described in Results.
Fluorescence and ANS binding. Fluorescence measurements were recorded on a Perkin-Elmer LS-50B spectrofluorimeter in a 1-ml semimicrocuvette with a 1-cm path length at 25°C. For protein fluorescence, the excitation wavelength was 290 nm, and the emission spectra were recorded at between 300 and 400 nm. For 8-anilino-1-naphthalenesulfonate (ANS) fluorescence, the excitation wavelength was 370 nm, and the emission spectra were recorded at between 440 and 540 nm. ANS was added to protein samples to a final concentration of 20 µM. The protein concentration in all experiments was 0.2 mg/ml.
CD. Circular dichroism (CD) spectra were obtained on a Jasco-600 spectropolarimeter (Japan Spectroscopic Co., Tokyo, Japan). Near-UV CD spectra (320 to 260 nm) were collected using a cylindrical quartz cell with a path length of 1 cm. The protein concentration was 1 mg/ml. Far-UV CD spectra (260 to 200 nm) were obtained using a cylindrical quartz cell with a path length of 0.02 cm. Secondary structure was estimated using the SELCON procedure (50). The protein concentration was in the range of 0.2 to 0.5 mg/ml for different experiments, and all measurements were performed at 25°C.
|
|
|---|
70 nm with a molecular mass of 14,700 to 18,400 kDa (Brian Bowman, personal communication), corresponding to approximately 500 copies of pre-VP22a. This is considerably larger than the size of the scaffolds purified by Newcomb et al. (33), presumably reflecting the different properties of their human cytomegalovirus-HSV-1 fusion construct and the wild-type HSV-1 scaffolding protein used here.
![]() View larger version (91K): [in a new window] |
FIG. 1. Purification of scaffold particles. The scaffold particles were purified as described in Materials and Methods. (a) At each purification stage approximately 1/100 of the sample was removed for analysis on an SDS-10% polyacrylamide gel. Lane 1, infected cell extract; lane 2, pellet after freeze-thawing; lane 3, supernatant after freeze-thawing; lane 4, pellet from ammonium sulfate precipitation; lane 5, supernatant from ammonium sulfate precipitation; lane 6, purified pre-VP22a scaffolds after sucrose gradient banding, dialysis, and concentration; lane 7, purified HSV-1 B capsids. The names of the HSV-1 capsid proteins are indicated to the right of lane 7. The position of the pre-VP22a band in lane 6 is indicated by an asterisk. (b) Purified scaffold particles were absorbed onto a Parlodion-coated microscope grid, stained with 1% phosphotungstic acid, and examined by electron microscopy. Bar, 200 nm.
|
![]() View larger version (147K): [in a new window] |
FIG. 2. Dissociation of scaffold particles by urea and pH reduction. Scaffold particles prepared as for Fig. 1 (a) were treated with 1 M urea (b) or dialyzed against PBS that had been adjusted to pH 6.0 (c) or pH 5.5 (d) as described in the text. The samples were absorbed onto Parlodion-coated microscope grids, stained with 1% phosphotungstic acid, and examined by electron microscopy. Bar, 500 nm.
|
To confirm that lowering the pH was causing dissociation of the scaffold particles, their sizes were analyzed by sucrose gradient centrifugation. For these experiments both pre-VP22a and VP22a (the truncated form of pre-VP22a missing the C-terminal 25 amino acids [41]) scaffold particles were prepared. Purified scaffold particles at a concentration of 1 mg/ml in PBS (pH 7.2) were treated with 1 mM DTT for 1 h to ensure the removal of intermolecular disulfide cross-links before being layered on top of 10 to 40% sucrose gradients prepared at either pH 7.2 or 5.5 (see Materials and Methods). After centrifugation at 40,000 rpm (Sorvall AH650 rotor) for 105 min, the gradients were examined for the presence of visible refracting bands. For both pre-VP22a and VP22a, a single band was visible near the bottom of the pH 7.2 gradients, but in neither case could a band be seen on the pH 5.5 gradients (data not shown). To ascertain the distribution of the scaffolding proteins, each gradient was fractionated and analyzed by Western blotting. Figure 3 shows the profiles for both the full-length and truncated forms. At pH 7.2, the abundance of both pre-VP22a (Fig. 3a) and VP22a (Fig. 3c) was maximal in fraction 3, in agreement with the position of the visible scaffold particle band. In contrast, at pH 5.5 both pre-VP22a (Fig. 3b) and VP22a (Fig. 3d) were shifted towards the top of the gradient, suggesting that the scaffold particles were dissociating into smaller components.
![]() View larger version (21K): [in a new window] |
FIG. 3. Sucrose gradient analysis of scaffolds. Scaffold particles purified from AcUL26.5 (a and b)- or AcVP22a (c and d)-infected Sf21 cells were analyzed on 5-ml, 10 to 40% (wt/vol) sucrose gradients at pH 7.2 (a and c) or pH 5.5 (b and d). Centrifugation was at 40,000 rpm for 105 min in a Sorvall AH650 rotor. Nine fractions were collected from the bottom of the gradient, and 20-µl samples of each fraction were analyzed on SDS-10% polyacrylamide gels and transferred to nitrocellulose membranes. To reveal the distribution of the scaffolding proteins, the blots were probed with MCA406 antibody as described in Materials and Methods.
|
![]() View larger version (32K): [in a new window] |
FIG. 4. Sizing of dissociated scaffolds. Scaffold particles purified from AcUL26.5 (a and b)- or AcVP22a (c and d)-infected Sf21 cells were mixed with BSA (250 µg/gradient; Sigma Aldrich) and layered onto 5-ml, 10 to 40% (wt/vol) sucrose gradients at pH 5.5. After centrifugation at 40,000 rpm for 20 h in a Sorvall AH650 rotor, 12 fractions were collected from the bottom of the gradient. Duplicate 20-µl samples of each fraction were analyzed on separate SDS-10% polyacrylamide gels. One gel from each pair was stained with Coomassie brilliant blue (a and c) to reveal the distribution of the BSA size marker, while the duplicate gel was blotted onto a nitrocellulose membrane (b and d) and probed with MCA406 antibody to reveal the distribution of the scaffolding proteins.
|
Figure 5 shows the CD spectra obtained from purified scaffold particles and the effects of pH changes and presence of urea on these spectra. The SELCON procedure (51) was used to estimate the secondary structure content of the sample from the far-UV CD spectrum (Fig. 5a). At pH 7.2, pre-VP22a was found to contain 19%
-helix, 24% antiparallel ß-sheet, 2% parallel ß-sheet, and 24% turn. The secondary structure prediction program PSIPRED gives a value of up to 21%
-helix but predicts less than 5% ß-sheet. Lowering the pH from 7.2 to 5.5 or addition of 1 M urea led to small losses of secondary structure, with the changes in ellipticity at 225 nm of the order of 10% or less. Addition of 8 M urea led to a greater than 95% loss of ellipticity at 225 nm, indicating that the protein was completely unfolded under these conditions.
![]() View larger version (27K): [in a new window] |
FIG. 5. CD spectra of pre-VP22a. (a) Far-UV CD spectra. Purified pre-VP22a scaffold particles at a concentration in the range of 0.8 to 0.5 mg/ml in PBS (pH 7.2) containing 1 mM DTT (trace 1) were dialyzed against PBS that had been adjusted to pH 5.5 (trace 2) or were incubated for 15 min in the presence of 8 M (trace 3) or 1 M (trace 4) urea (diluted from a freshly prepared 10 M solution) and examined by far-UV CD as described in the text. Readings were taken at a final concentration in the range of 0.5 to 0.2 mg/ml. The presence of 8 M urea prevented the acquisition of reliable data below 210 nm. (b) Near-UV CD spectra. Purified pre-VP22a scaffold particles at 1.1 mg/ml in PBS (pH 7.2) containing 1 mM DTT were examined by near-UV CD as described in the text (trace 1). Freshly prepared 10 M urea was then added to a final concentration of 1 M, and the reading was repeated (trace 2). The spectra were corrected for the effects of buffer by subtracting the appropriate buffer controls and converted to molar ellipticity units to correct for concentration.
|
It should be noted that the amplitudes of the peaks in the near-UV CD spectrum of pre-VP22a are relatively small by comparison with those found in several well-characterized proteins such as insulin, lysozyme, and carbonic anhydrase (63). While there are several factors that influence the intensities of near-UV CD spectra, one explanation for the low intensities of the peaks in pre-VP22a is that the interactions stabilizing the tertiary structure of the protein may be relatively weak.
From the CD studies it can be concluded that the lowering of the pH from 7.2 to 5.5 or the addition of 1 M urea leads to the retention of most of the secondary and tertiary structural features of native pre-VP22a.
Fluorescence spectroscopy reports on the environment of the tryptophan side chains and therefore provides an additional measure of the integrity of the folded state of a protein. A completely unfolded protein would have a
max (wavelength of maximum emission) of 356 nm, indicating that the Trp residues are fully exposed to the solvent. A shift to shorter wavelengths indicates that the Trp residues are at least partially shielded from the solvent (11). Changes in fluorescence intensity during unfolding can often show a more complex pattern because a variety of factors, such as efficiency of quenching by solvent and by energy transfer, are involved.
Pre-VP22a scaffold particles were incubated for 15 min with a range of urea concentrations of from 1 to 8 M, and their fluorescence spectra were recorded (Fig. 6a). The untreated control sample had a
max of 344.5 nm. This is significantly shifted from the value of 356 nm observed for the model compound N-acetyltryptophanamide and is consistent with the scaffolding protein having a tertiary structure in which the Trp side chains are buried to a moderate extent. In the presence of 8 M urea, the protein had a
max of 355 nm, indicating that the protein is essentially completely unfolded under these conditions. However, in the sample treated with 1 M urea (where the dissociation of scaffold particles still occurs), there was only a minor shift in
max (to 345.5 nm), representing
10% of the total change seen between 0 and 8 M (Fig. 6b). When scaffold particles dialyzed against PBS at pH 5.5 were examined, they also gave a
max of 345.5 nm. This suggests that reducing the pH has little effect on the average exposure of the Trp side chains and thus presumably the overall tertiary structural features of the protein.
![]() View larger version (21K): [in a new window] |
FIG. 6. Fluorescence spectra of pre-VP22a. (a) Purified pre-VP22a scaffold particles (in PBS [pH 7.2] with 1 mM DTT) at a final concentration of 0.2 mg/ml were incubated for 15 min in urea at concentrations of from 0 to 8 M, increasing in 1 M steps. Part of the sample was also dialyzed against PBS that had been adjusted to pH 5.5. The samples were examined by fluorescence spectroscopy as described in the text. All spectra were corrected for background by subtraction of a buffer control spectrum. To improve clarity, only the traces obtained with 0 M (trace 1), 1 M (trace 2), 3 M (trace 3), 6 M (trace 4), and 8 M (trace 5) urea are reproduced here. (b) The observed shift in max from the value with 0 M urea, expressed as a percentage of the total change in max induced by 8 M urea, is plotted against the urea concentration. The shift seen at pH 5.5 is indicated by an arrow.
|
Pre-VP22a appears to have a weakly defined tertiary structure but does not behave like a typical molten globule. The molten globule is a relatively compact state, in which a protein retains most of its native secondary structure but the interactions between side chains stabilizing the tertiary structure are weak (1, 44). The fluorescent dye ANS binds preferentially to nonpolar regions of proteins. A characteristic large increase in fluorescence at 470 nm (with excitation at 370 nm) is generally considered to be a sensitive test for the molten globule state of proteins, where ANS has access to the hydrophobic interior (1, 44). Although ANS has been shown to bind to the native state of some proteins via clusters of nonpolar residues, binding to typical molten globule states (Fig. 7b) is usually enhanced by at least an order of magnitude compared with either the native or fully unfolded states (45, 48). Replicate samples of scaffold particles were tested for ANS binding ability at physiological pH (pH 7.2) or after dialysis against PBS adjusted to pH 6.5, 6.0, or 5.5.
![]() View larger version (24K): [in a new window] |
FIG. 7. ANS binding. (a) ANS (at a final concentration of 20 µM) was added to purified pre-VP22a scaffold particles (at 0.2 mg/ml) after they had been dialyzed against PBS containing 1 mM DTT that had been adjusted to pH 7.2 (trace 1), pH 6 (trace 2), or pH 5.5 (trace 3) as described in the text. The excitation wavelength was 370 nm, and fluorescence was recorded at between 440 and 540 nm. A control spectrum of ANS in PBS (pH 7.2) was measured (trace 4); there was no significant difference between the fluorescence of free ANS over the range from pH 5.5 to pH 7.2. (b) For comparative purposes, the ANS binding spectrum of the capsid shell protein VP23, which forms a molten globule, is reproduced from reference 23. Only the curves for ANS (20 µM) alone (trace 1) or mixed with VP23 (0.2 mg/ml) (trace 2) are shown here. The spectra in panel b were recorded using lower slit widths than for those in panel a, resulting in an approximately fourfold decrease in the intensities in panel b compared with panel a, as shown by comparing the spectra for 20 µM ANS in the two panels. When this factor is taken into account, it is clear that the enhancement of ANS fluorescence in the case of VP23 (b) is at least eightfold higher than that in the case of pre-VP22a at pH 5.5 (a).
|
Effect of reduced pH on capsids. Since dissociation of the scaffold seems to be a necessary precursor to its exit from the capsid, the effect of reduced pH was examined by dialyzing purified B capsids against PBS at pH 5.5 for 16 h at 4°C in the presence of 1 mM DTT. Figure 8 shows electron micrographs of negatively stained B capsids treated at pH 7.2 (Fig. 8a) and pH 5.5 (Fig. 8b). While the scaffold density could clearly be seen inside the capsids at pH 7.2, it was not observed at pH 5.5, suggesting that the nature of the scaffold had altered. When capsids treated in a similar way were examined after thin sectioning, the characteristic ring-shaped, central scaffold cores were clearly defined at pH 7.2 (Fig. 8c) but were not seen at pH 5.5 (Fig. 8d). Instead the internal material had either congregated into one or more clumps on the inner surface of the capsid or was more evenly distributed around the inside of the capsid shell. To confirm that the scaffolding proteins had remained inside the capsids, B capsids that had been treated at pH 7.2 (Fig. 9a and b) or pH 5.5 (Fig. 9c and d) were layered onto sucrose gradients of the same pH. Western blot analysis showed that at both pHs, VP22a (Fig. 9b and d) cosedimented with the major capsid protein, VP5 (Fig. 9a and c), in the position occupied by the visible capsid band. A similar result was obtained when capsids were treated with 1 M urea (data not shown). No dissociated VP22a was detected at the top of the gradients, confirming that the scaffolding proteins had remained associated with the capsids.
![]() View larger version (132K): [in a new window] |
FIG. 8. Effects of lowered pH on scaffold-containing capsids. Purified B capsids were dialyzed against PBS at pH 7.2 (a and c) or pH 5.5 (b and d) for 16 h at 4°C in the presence of 1 mM DTT. The capsids were then either used for negative staining (a and b) or prepared for thin sectioning (c and d) and examined by electron microscopy. Bar, 200 nm.
|
![]() View larger version (29K): [in a new window] |
FIG. 9. Purified B capsids that had been treated at pH 7.2 (a and b) or pH 5.5 (c and d) as shown in Fig. 8 were loaded onto 13-ml, 10 to 40% (wt/vol) sucrose gradients of the same pH. After centrifugation at 40,000 rpm for 20 min in a Sorvall TsT41 rotor, 10 fractions were collected from the bottom of the gradient. Twenty-microliter samples of each fraction were analyzed on SDS-10% polyacrylamide gels and transferred to nitrocellulose membranes. To reveal the distribution of VP22a, the blots were probed with MCA406 antibody (b and d). The blots were then incubated in a solution containing 100 mM 2-mercaptoethanol, 2% (wt/vol) SDS, and 62.5 mM Tris-HCl (pH 6.7) at 50°C for 30 min to remove bound antibody and reprobed with DM185 antibody to reveal the distribution of the major capsid protein, VP5 (a and c).
|
|
|
|---|
When they first assemble, the proteins forming the HSV procapsids are apparently not in their most stable state, since they can rearrange to form polyhedral capsids in a process that does not require energy input (58). Studies on temperature-sensitive mutants have shown that the procapsid state can be maintained for several hours (46) but that once the conversion to polyhedral capsids is initiated, it progresses quite rapidly (2). From this it can be concluded that the procapsid shell is maintained in an energetically suboptimal conformation. This has been demonstrated for P22, where head expansion has been shown to be an exothermic process, implying that the mature phage head is in a lower energy state than the procapsid (13). The maintenance of the procapsid shell in this relatively unfavorable state may be explained if the shell and scaffold are considered as a single entity rather than separately. Thus, the scaffold-shell complex would have a minimum-energy state that did not correspond to that of either the shell or the scaffold on its own. This minimum-energy state is the procapsid and represents the natural end point of assembly. When the link between the scaffold and the shell is broken, the constraints on the capsid shell are released. The proteins can then reconfigure into the minimum-energy state for the shell, which corresponds to the polyhedral capsid conformation. The fate of the scaffold would depend on the conditions applying when the scaffold-shell link was broken. If cleavage is accompanied by DNA entry and packaging, the scaffold will dissociate and exit from the capsid to be replaced by the viral DNA. However, if there is no packaging, the scaffolding proteins can refold into their own minimum-energy state, represented by the small core of the B capsid. The ability of the scaffold to maintain the shell in the procapsid configuration may have an additional purpose, since this would ensure that it remains in a suitable condition for DNA packaging for a longer time, thereby enlarging the pool of procapsids available for packaging.
Status of scaffolding proteins during exit from capsids. The form in which the scaffolding protein exits from the capsid is unknown, as is the route by which it leaves. In bacteriophage P22, the scaffolding protein is believed to be lost before the maturation from prohead to capsid is completed. The P22 prohead has a 30- to 45-Å-diameter channel at the center of each hexon (57). These channels are closed during the rearrangement of the shell proteins that accompanies DNA packaging, and the mature phage head forms a largely unbroken shell around the DNA (64). In HSV the mature capsid shell is not unbroken as in P22 but is perforated by channels through the pentons and hexons (60, 68), leaving open the question of when scaffold exit takes place. Indeed, it has been shown that moderate concentrations of chaotropic agents can remove VP22a from B capsids in the presence of 0.5 M NaCl, without apparently altering the structure of the capsid shell (36). However, by analogy with P22, it seems likely that the HSV scaffold is lost before or during the conversion from procapsid to capsid, as the HSV procapsid shell is more open than that of the mature capsid, with a poorly formed capsid floor and larger channels through the pentons and hexons (37, 58).
Treatment of B capsids at low pH showed that although the characteristic scaffold cores had disappeared, the scaffolding proteins remained inside the capsids. This suggests that the internal scaffold can be disrupted by low pH but either that suitable channels, through which the scaffolding protein can pass, are not present in the B capsid shell or that the individual protein molecules are not in an appropriate form to leave the capsid.
Monomeric P22 scaffolding protein has been suggested to form a molten globule (61). The adoption of a molten globule form would be expected to provide the P22 scaffolding protein with greater flexibility, which might aid its passage through the narrow channels in the prohead. One of the HSV-1 capsid shell proteins (VP23) has already been shown to have the properties of a molten globule (23). However, fluorescence, far-UV CD, and near-UV CD analyses showed that the conditions used to dissociate HSV-1 scaffold particles (1 M urea or pH 5.5) do not induce large alterations in the structure of pre-VP22a. Although there was an increase in ANS fluorescence at pH 5.5 compared to pH 7.2 (Fig. 7), it was not large enough to indicate that the protein had adopted a molten globule state. Therefore, there is no definite evidence that pre-VP22a adopts a classical molten globule structure as a means of exiting from the capsid. However, it should be pointed out that the relatively small magnitude of the near-UV CD spectrum indicates that the interactions involved in stabilizing the tertiary structure of the pre-VP22a protein may be relatively weak, and this degree of structural plasticity could be important for its role in forming a short-lived scaffold.
When purified scaffold particles, at relatively high concentrations (
1 mg/ml), were maintained at pH 5.5, they tended to precipitate. This was observed, for example, when they were dialyzed to lower their pH for near-UV CD analysis. The propensity to aggregate may reflect the exposure of additional nonpolar sites on the protein as suggested by the increase in ANS binding (Fig. 7). However, when scaffold particles at 1 mg/ml were sedimented through gradients at pH 5.5, the subunits dissociated and aggregation did not take place (Fig. 3 and 4). The most probable explanation is that the subunits were able to separate quickly from each other when they migrated into, and were diluted by, the gradient, as aggregation was not a problem at the lower protein concentrations (
0.2 mg/ml) used for far-UV CD and fluorescence. It seems likely that a similar process could occur during DNA packaging, as the exit of dissociated scaffolding proteins might be expected to be an efficient process that would remove the subunits before they had the opportunity to aggregate.
Role of DNA packaging in scaffold dissociation. In order to exit from capsids, scaffolding proteins have to reverse both their self-interaction and their interaction with the capsid shell. In HSV, reversing the interaction with the capsid shell is achieved by proteolysis of pre-VP22a. Studies of mutants with defects in cleavage (2, 14, 40, 46) suggest that proteolysis of the scaffolding protein is normally needed to allow DNA packaging. However, Desai and Person (6) recently described a type of mutant that could still package DNA even though the cleavage site in pre-VP22a had been destroyed. These mutants contain secondary mutations in VP5 that weaken, but do not abolish, its interaction with pre-VP22a. The weakened interaction is still sufficient for capsid assembly while allowing the two intact proteins to separate subsequently to permit DNA packaging. Thus, it appears that it is the disruption of the connection between pre-VP22a and VP5 that is important for DNA packaging and scaffold loss rather than the cleavage of pre-VP22a itself. However, that the disruption of this connection is not sufficient to ensure exit of the scaffold is demonstrated by the existence of polyhedral B capsids containing the cleaved, VP22a, form of the scaffolding protein. Presumably, some additional step is required to ensure dissociation of the scaffold and convert VP22a into a form capable of passing through the shell.
It is well recognized that the nature of protein-protein interactions in virus particles can be significantly affected by changes in pH. For example, studies using the purified major capsid protein of rotavirus, VP6, have shown that its interactions are strongly influenced by pH (25). In this case, the interacting regions of the protein are negatively charged (29), and it is believed that the protonation of side chains at low pH counteracts the repulsive electrostatic forces, thereby allowing the proteins to interact. At pH values in the range of 3.5 to 5.5 VP6 forms spherical particles, while between pH 5.5 and 7 it forms long tubes. Interestingly, VP6 normally assembles on an inner shell of another protein, VP2, which is postulated to induce the formation of spherical capsids by supplying a suitably positively charged electrostatic environment (25). Low pH is also known to be an important factor in the dissociation of several types of virus that enter the cell by endocytosis. For example, during infection by influenza virus, separation of the M protein from the core is an important step in uncoating that is enhanced at the reduced pH found in the endosome (19, 65). In this case, the acidification is due to an influx of H+ ions through the ion channels in the virus envelope rather than to any effect brought about by the genomic RNA. The capsid of foot-and-mouth disease virus, a picornavirus, is also labile at acid pH. Interestingly, empty capsids are less acid labile than full, RNA-containing, capsids, requiring an extra 0.5-unit reduction in pH to cause their dissociation. Thus, the virion RNA appears to be modulating the response of the capsid to lowered pH (3). There are several other examples where the presence of nucleic acid has been proposed to exert a direct influence on protein conformations and interactions during the life cycles of various viruses. For example, Thuman-Commike et al. (56) suggested that the close proximity of significant amounts of negatively charged DNA could break the link between scaffold and shell in P22 procapsids, thereby acting as a trigger for head expansion. Also, Lata et al. (24) speculated that in the double-stranded DNA phage HK97, where head expansion can be induced in vitro by exposure of unexpanded proheads to acid pH, the acidification might mimic processes that occur during insertion of DNA into the phage prohead.
Pre-VP22a has a predicted isoelectric point (pI) of pH 6.62. Therefore, at neutral pH it should have a net negative charge, while at pH values lower than its pI, such as pH 5.5, it should have a net positive charge. From this it follows that relatively small changes in pH would have a large effect on the charge state of surface amino acids of the protein but would not necessarily have a dramatic effect on its overall structural properties. Studies on foot-and-mouth disease virus have demonstrated how pH-induced alterations in the protonation state of a small number of amino acids can overcome the ionic and hydrogen bonding forces holding the structural subunits together and lead to their disassociation (12). Self-interaction in pre-VP22a (5, 38, 42) and its human cytomegalovirus counterpart (62) has been shown to involve only limited portions of the protein, and it is easy to envisage how similar small-scale changes could cause the dissociation of scaffold particles without having any marked effect on the secondary or tertiary structures of the component proteins.
Based on the results described here, we propose that the disassembly of the scaffold core inside procapsids may result from a change in the local charge environment caused by the insertion of the viral genome. DNA is an acidic molecule with a substantial negative charge, which, within cells, is normally neutralized by being bound to basic proteins or to polyamines. Although spermine is found within the capsid in HSV-1 virions and is thought to be important for close packing of the genome, it is not known when it enters the capsid, and the amounts detected are sufficient to neutralize only about half the charges on the DNA molecule (15, 17). During packaging the viral DNA enters into a confined space by passing through a narrow channel, which may shield it from the cellular environment as has been suggested for the double-stranded RNA virus bluetongue virus (18). Recently it has been shown that the
29 portal complex can exert a large force to counteract the combined resistance provided by the entropic, electrostatic, and bending energies of the packaged DNA (50). A similar portal complex is now known to be present in herpesvirus capsids (35). It is reasonable to assume, therefore, that the charges on the packaged DNA do not have to be fully neutralized. Indeed, it is likely that some residual repulsive force is important for initiating the release of the DNA from the capsid following infection (50). Nothing is known about the conditions within the capsid during DNA packaging, but again it seems reasonable to assume that localized reductions in pH would arise due to incomplete neutralization of the charges on the DNA. The experiments described here have clearly demonstrated that a relatively small reduction in pH induces the rapid dissociation of isolated scaffold particles into their constituent proteins. Equivalent local, and perhaps short-lived, alterations in pH within the capsid may provide a mechanism to drive the dissociation of the scaffold into a low-molecular-weight form capable of exiting through the available channels.
We thank the Biotechnology and Biological Sciences Research Council of the United Kingdom for provision of the CD facility.
|
|
|---|
29 portal motor can package DNA against a large internal force. Nature 413:748-752.[CrossRef][Medline]
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»