Previous Article | Next Article ![]()
Journal of Virology, June 2002, p. 5350-5356, Vol. 76, No. 11
0022-538X/02/$04.00+0 DOI: 10.1128/JVI.76.11.5350-5356.2002
Copyright © 2002, American Society for Microbiology. All Rights Reserved.
X174 Genome-Capsid Interactions Influence the Biophysical Properties of the Virion: Evidence for a Scaffolding-Like Function for the Genome during the Final Stages of Morphogenesis
Department of Veterinary Sciences and Microbiology, University of Arizona, Tucson, Arizona 85721
Received 7 November 2001/ Accepted 26 February 2002
|
|
|---|
X174 morphogenesis, there is an 8.5-Å radial collapse of coat proteins around the packaged genome, which is tethered to the capsid's inner surface by the DNA-binding protein. Two approaches were taken to determine whether protein-DNA interactions affect the properties of the mature virion and thus the final stages of morphogenesis. In the first approach, genome-capsid associations were altered with mutant DNA-binding proteins. The resulting particles differed from the wild-type virion in density, native gel migration, and host cell recognition. Differences in native gel migration were especially pronounced. However, no differences in protein stoichiometries were detected. An extragenic second-site suppressor of the mutant DNA-binding protein restores all assayed properties to near wild-type values. In the second approach,
X174 was packaged with foreign, single-stranded, covalently closed, circular DNA molecules identical in length to the
X174 genome. The resulting particles exhibited native gel migration rates that significantly differed from the wild type. The results of these experiments suggest that the structure of the genome and/or its association with the capsid's inner surface may perform a scaffolding-like function during the procapsid-to- virion transition. |
|
|---|
X174 morphogenesis is dependent on two species (30). Together, these two proteins perform the full spectrum of functions found in one-protein systems. However, after procapsid assembly, the final stages of
X174 morphogenesis differ. In dsDNA systems, procapsids expand during packaging (32, 37, 41), and the genome forms a dense core (18). In contrast,
X174 morphogenesis concludes with the collapse of coat proteins around the single-stranded genome, which is associated with the inner surface of the capsid (15, 16, 31, 38, 39).
As illustrated in Fig. 1,
X174 genome replication is coupled to DNA packaging. The preinitiation complex, consisting of the host cell rep and viral A and C proteins, associates with the procapsid forming the 50S complex (21, 40). The viral A protein binds the origin of replication in replicative-form DNA. This is both necessary and sufficient for packaging specificity (3, 4, 26). Upon binding, protein A nicks the origin (47) and forms a covalent ester bond with the DNA (19). After one round of rolling circle synthesis, protein A cuts and ligates the newly generated origin, generating a circular single-stranded molecule (7, 20). This packaging mechanism produces precise genomes of identical length (4).
![]() View larger version (26K): [in a new window] |
FIG.1. X174 morphogenesis.
|
The interaction of icosahedral capsid proteins with single-stranded genomes is a well-documented phenomenon. Many viral RNA capsid proteins have internally localized basic N termini extensions that nonspecifically bind genomes (11, 12, 36, 43, 48, 49). The phenomenon has been documented in single-stranded animal viruses as well (1, 10, 25, 46). To investigate the functions of the
X174 genome tether, both the protein and the nucleic acid components were altered. The protein component was altered by mutations in the DNA-binding protein. The DNA component was altered by packaging foreign, unit-length, single-stranded, circular DNA molecules. In both instances, the altered particles were infectious but exhibited different biophysical properties.
|
|
|---|
XB and p
XDJ contain IPTG (isopropyl-ß-D-thiogalactopyranoside)-inducible clones of the denoted
X174 genes (8, 9). The slyD host mutation confers resistance to
X174 E-protein-mediated lysis (42). The gro89 host mutation blocks DNA packaging (21).
Phage mutants.
The
X174 J mutants J-3K
LI, J-K
L ALL, and J-3K
LII/su(J)-FS1F have been previously described (33). The su(J)-FS1F mutation was placed into the J-3K
LI background by oligonucleotide-mediated mutagenesis (24). Progeny that had acquired the su(J)-FS1F mutation were identified by selecting against the temperature-sensitive phenotype of the J3K
LI parent. Two rounds of oligonucleotide mutagenesis were performed to place the su(J)-FS1F mutation in the wild-type background. Genotypes of all strains were verified by direct DNA sequence analysis.
Buoyant density gradients.
For small-scale experiments in which two or three different particles were analyzed within the same gradient, 105 to 106 particles were mixed into a 1.4-g/cm3 CsCl solution and spun for 47.5 h at 23,000 rpm in an SW51 rotor (Beckman). Gradients were divided into 80 to 85 fractions. The location of infectious particles was determined by a plaque assay. For large-scale preparations of J-K
L ALL 70S particles, 100 ml of slyD cells (2.0 x 108 cells/ml) were infected (multiplicity of infection [MOI] = 5) at 33°C and incubated for 2 h. To generate wild-type procapsids, gro89 cells were infected with lysis-deficient
X174 am(E)W4. Infected cells were harvested, resuspended in 10 ml of BE buffer, and lysed with T4 lysozyme. Cellular debris was eliminated by centrifugation. The supernatant was layered atop CsCl step gradients and spun as previously described (22). Exogenous virions (1.0 x 106) were added to gradients as a density marker. Procapsid and 70S particle bands were clearly visible after centrifugation. Titers of fractions were determined to ascertain the location of the wild-type marker phage.
Native agarose gel electrophoresis. To examine particles by native gel electrophoresis, 10-µl samples containing 1.0 x 108 PFU were mixed with 6x gel loading buffer (0.25% bromophenol blue, 0.25% xylene cyanol FF, 30% glycerol). Samples were bidirectionally electrophoresed through 0.8% (wt/vol) agarose-TBE (45 mM Tris-borate, 1.0 mM EDTA) gels for 10 h at 24 V/cm2. After electrophoresis, lanes were cut into 2.0-mm horizontal sections with a modified egg slicer. Particles were eluted from the gel by vortexing in 0.1 ml of HFB buffer. The location of infectious particles was determined by a plaque assay.
Attachment assays. E. coli C122 cells were grown to a concentration of 1.0 x 108 cells/ml and concentrated fivefold in growth media (1.0% tryptone, 0.5% KCl). MgCl2 and CaCl2 were added to concentrations of 10 and 5.0 mM, respectively. Approximately 1.0 x 108 phage were added to 1.0 ml of cells and incubated at 37°C for specified time intervals (see the figures). At sampling times, attached phage were removed by centrifugation. Supernatants were titered to determine the level of unattached virions.
Construction of Ampr packaging plasmids and transducing particles.
X174 DNA containing the
X174 origin of replication was amplified. The 5' PCR primer was designed to introduce an NcoI site into the fragment that was then initially cloned into TOPO 2.1 vector (Invitrogen). The TOPO vector was digested with NcoI and EcoRI (adjacent to cloning site), and the fragment was placed into PSE420 (Invitrogen) digested with the same enzymes (PORI). To bring the size of PORI up to 5,386 bp, additional material was cloned behind the
X174 origin. These DNA sequences were obtained by amplifying pSE420 DNA between bases 3302 and 3776. This PCR fragment was first placed into a TOPO 2.1, and the orientation of the insert was determined. Depending on orientation, plasmids were cut with BamHI and XbaI or with NotI and SacI, and then cloned into PORI that had been prepared with BamHI and NheI or with NotI and SacI. Plasmids were transformed into BAF30 recA cells. Transducing particles were produced by infecting cells harboring the packaging plasmids with wild-type
X174. The presence of the origin of replication in the plasmid is both necessary and sufficient for packaging a single-stranded version of the vector (4, 26). Lysates contain both virion and transducing particles. The titer of transducing particles was determined by infecting 1.0 x 108 slyD cells at an MOI of 0.1 with subsequent plating on ampicillin (100 µg/ml) plates. The low MOI and slyD cells were used to prevent coinfections and a second round of infection by progeny virions, respectively. The ratio of progeny virions to Ampr (ampicillin-resistant) transducing particles was ca. 50:1 in both infections. This represents typical values for these types of experiments (21).
|
|
|---|
X174 J mutants used in these studies demonstrated that mature packaged particle formation was a function of the number of charged residues of the protein (33). For example, mutant J proteins with only nine basic amino acid residues (the wild-type contains 12) could produce packaged particles with wild-type S values (i.e., 114S). However, several other biophysical properties differ (see below). Mutant proteins with only six basic residues produce particles that sediment at 70S (33). Analyzing the nature of the DNA associated with the 70S particles (partial versus complete genomes), its susceptibility to DNase, and the density of the 70S particles would determine if genome biosynthesis terminates with a cessation in packaging or whether these two processes can be partly uncoupled in vivo.
The mutant genotypes and phenotypes used in these studies are summarized in Table 1. DNA associated with J-K
L ALL 70S particles was extracted and analyzed by electrophoresis (data not shown). It was found to be identical to the virion DNA, indicating that ssDNA biosynthesis went to completion. The density of the particles was determined to be 1.36 g/cm3 (Table 2) by buoyant density centrifugation, a value midway between the densities of the 114S virion (1.39 g/cm3) and the 108S procapsid (1.31 g/cm3) used as standards. These data indicate that the mutant J protein had no effect on genome biosynthesis but that the genome was not fully packaged. To test this hypothesis, particle densities were redetermined after DNase treatment (2). Although the densities of the virion and empty procapsid were not affected, the density of the 70S particle was reduced (Table 2).
|
View this table: [in a new window] |
TABLE 1. Genotypes and phenotypes of X174 J mutants in these studies
|
|
View this table: [in a new window] |
TABLE 2. Densities of particles generated in J- mutant-infected cells
|
LI, produce infectious particles with wild-type S values. However, the mutant has a small plaque phenotype and is both temperature and cold sensitive. Particles packaged with the J-3K
LI and wild-type J protein were characterized by buoyant density centrifugation. The results of these analyses, along with those of stoichiometric studies (see below), could determine whether the genomic DNA is fully encapsidated, more mutant J protein is needed for packaging, or other possibilities. For these experiments particles packaged with wild-type J protein contained an amber mutation in gene B. Since the titers of particles could be independently determined (see the figure legends), it was possible to characterize both types of virion within the same gradient. As seen in Fig. 2A, particles packaged with the mutant J protein are denser than the wild type.
![]() View larger version (25K): [in a new window] |
FIG. 2. (A) Buoyant densities of wild-type and J-3K LI particles. Both particles were analyzed in the same gradient. An additional genetic marker, amB, was placed in the wild-type background. This allowed the particles to be specifically titered on BAF30 p XB at 42°C. The J-3K LI mutant is temperature sensitive. The titer of J-3K LI was determined on C122 (sup0) at 33°C. (B) Buoyant densities of particles packaged with mutant J proteins with or without the su(J)-FS1F extragenic second-site suppressor. An order of magnitude more of the J-3K LI particles, which have a temperature-sensitive phenotype, was loaded onto the same gradient with the double mutant. The position of the su(F)S1F/J-3K LI particles could be ascertained and distinguished from J-3K LI by determining the titer at 42°C. Particle titers were normalized to the same order of magnitude for the graph. Symbols: , wild type; , J-3K LI; , su(J)-FS1F/J-3K LI.
|
|
View this table: [in a new window] |
TABLE 3. Protein composition of wild-type and J-3K LI particlesa
|
LI and su(J)S1F/J-3K
LI particles were compared. The su(J)S1F mutation is a nonallele-specific, extragenic, second-site suppressor of charge-altered J proteins, which has been previously characterized and described elsewhere (33). su(J)S1F suppresses both the small plaque and the temperature-sensitive phenotypes, raising plating efficiencies from 10-3 to 0.5 at the restrictive temperatures. An order of magnitude more J-3K
LI particles was loaded on the same gradient with the double mutant. The position of the su(F)S1F/J-3K
LI could be ascertained and distinguished from J-3K
LI particles by determining the titers at 42°C. As seen in Fig. 2B, the particles were readily separated by their densities, demonstrating that the suppressor is affecting the density of the capsid, restoring it to a more wild-type value. Since both particles are packaged with the same mutant J protein, the observed density differences are probably not caused by Cs+ ions or an excess of J protein in the J-3K
LI particles.
The extragenic suppressor is a Ser
Pro substitution located at amino acid 1 of the coat protein (33). In wild-type virion, this serine participates, via the
O, in a three-way polar interaction (coat-coat-coat) directly atop the threefold axis of symmetry (38, 39). The suppressing substitution most likely alters this interaction. Buoyant density gradients were performed to determine the effect, if any, of this substitution alone in a wild-type background (Fig. 3). Wild-type, su(J)-F S1F/wild type J, and J-3K
LI particles were analyzed in the same gradient. The su(J)-F S1F/wild type J is slightly more dense than the wild type.
![]() View larger version (25K): [in a new window] |
FIG. 3. Buoyant densities of wild-type, su(J)-F S1F/wild type J, and J-3K LI particles. All three types of particles were analyzed within the same gradient. An additional genetic marker, amB, was placed in the wild-type background. This allowed the titers of the particles to be specifically determined on BAF30 p XB at 42°C, where the J-3K LImutant is temperature sensitive. An order of magnitude more of the J-3K LI and wild-type (amB) particles was loaded onto the gradient than the su(J)-F S1F/wild type J particles. The position of the su(F)SIF/wild type J particles could be distinguished from the other particles by determining their titers at 42°C on a sup0 host. Particle titers were normalized to the same order of magnitude for the graph. Symbols: , wild type; , , J-3K LI; , su(J)-FS1F packaged with wild-type J protein.
|
![]() View larger version (22K): [in a new window] |
FIG. 4. (A) Native gel migration of wild-type and J-3K LI particles. (B) Enlargement of the wild-type minor population of positively charged particles. Negative gel section numbers indicate movement toward the negative electrode; positive gel section numbers indicate movement toward the positive electrode. Symbols: , wild type; , J-3K LI.
|
![]() View larger version (20K): [in a new window] |
FIG. 5. Native gel migration of wild-type and su(J)-FS1F/J-3K LI particles. Negative gel section numbers indicate movement toward the negative electrode; positive gel section numbers indicate movement toward the positive electrode. Symbols: , wild type; , su(J)-FS1F/J3K LI.
|
![]() View larger version (18K): [in a new window] |
FIG. 6. Attachment assays. Symbols: , wild type; , J-3K LI; , su(J)-FS1F/J-3K LI.
|
![]() View larger version (27K): [in a new window] |
FIG. 7. Native gel migration of wild-type X174 and Ampr transducing particles. The titer of wild-type phage has been normalized to the same order of magnitude as the transducing particles. Negative gel section numbers indicate movement toward the negative electrode; positive gel section numbers indicate movement toward the positive electrode. Symbols: , wild-type phage; and , transducing particles.
|
X174 was packaged with foreign DNA. Two packaging plasmids identical in length to the
X174 genome were constructed. These plasmids contain the
X174 origin of replication, which is both necessary and sufficient for packaging a single-stranded version of the plasmid (4, 26), and a gene encoding ampicillin resistance. The two plasmids differed in one segment. This segment is repeated, in either a parallel-parallel or a parallel-antiparallel manner. The parallel-antiparallel configuration may introduce a large hairpin loop. Particles were packaged in vivo by infecting cells harboring the plasmids with wild-type
X174. Particles were analyzed by native gel electrophoresis, and the gels were processed as described above. The titer of each fraction was determined for phage and Ampr transducing particles (Fig. 7). Two population peaks, positively and negatively charged, were detected for both sets of transducing particles (Fig. 7). However, population ratios differ between the two constructs. In addition, the negatively charged populations migrate considerably faster than the internal
X174 control. Therefore, to avoid running the transducing particles off the gel, run times were shorter than in the experiments described above. These data suggest that the nucleotide arrangement of the genome can change the biophysical properties of the capsid, perhaps by promoting or inhibiting genome secondary structure. |
|
|---|
X174 DNA does not exist as a dense core in the capsid, as is observed in dsDNA bacteriophages (18). Instead, it is tethered to the capsid's inner surface by the highly basic DNA-binding protein (J) and a group of basic capsid amino acid residues (38, 39). There are 60 copies of protein J per virion: one associated with each coat protein. In the atomic model, the protein forms an S-shaped polypeptide chain devoid of secondary structure. The C terminus of the protein is tightly associated with a cleft, located near the center of the coat protein. Moving toward the N terminus, the protein traces a path toward the fivefold axis of symmetry, crosses over to the adjacent capsid protein, and veers toward the C terminus of the adjacent J protein. This motif suggests that the DNA-binding protein guides the incoming genome into a somewhat ordered conformation. Accordingly, between 8 and 10% of the genome is ordered in the X-ray structure (38, 39). Here and in other systems where higher percentages of the genome are orderedsuch as Flock house virus (FHV) (25); Pariacoto virus (46), and Satellite tobacco mosaic virus (36)the genome is icosahedrally ordered via interactions with structural proteins. This phenomenon is thought to contribute to capsid assembly and stability. Altering the protein components of the tether. To investigate whether genome-capsid interactions affect the final stages of virion morphogenesis and/or the structure of the mature virion, particles packaged with mutant DNA-binding proteins were characterized. The mutant particles were significantly more dense than wild type, but the protein composition of the two particles is probably identical. Therefore, the altered density was probably not caused by a gross excess of protein contained in a volumetrically fixed capsid. The effects of possible Cs+ permeability were more difficult to discern. However, extragenic second-site suppressor procapsids packaged with the mutant DNA-binding protein restored particle densities to near wild-type values. Therefore, a simple model, in which counter ions compensate for the loss of basic amino acids, is not supported by the data. This leaves the intriguing possibility that the dimensions or shape of the mutant particles may be altered.
When suppressor capsids are packaged with wild-type J protein, the density values are slightly greater than with the wild-type virion. Since the mutant particles are still more dense than wild-type particles, the suppressor does not act via a compensatory mechanism. This suggests that there is an alternative maturation pathway that minimizes the effect of the genomic tether on the magnitude of capsid collapse.
To investigate whether differences were expressed on the capsid exterior, host cell attachment assays were performed. The particles packaged with the mutant DNA-binding protein exhibited dramatically lower attachment efficiencies. As seen in the density experiments, the presence of the extragenic second-site suppressor restored values toward that of the wild type. Differences in native gel migration, which is a function of size and net surface charge (45), were also observed. While small migration differences were seen between the wild-type and mutant particles migrating toward the anode, the most dramatic differences involved the presence of a minor population migrating in the opposite direction. In wild-type populations these particles represent a small subpopulation (1:1,000). However, the ratio was ca. 1:3 in mutant samples. As seen in the other assays, the extragenic suppressor restored the ratio to nearly wild-type values.
Altering the nucleic acid component of the tether.
Naked
X174 DNA is substantially richer in secondary structure than packaged DNA (5). Benevides et al. (5) hypothesized that the DNA-binding protein inhibited the formation of secondary structure. Therefore, it is likely that an interplay between base pairing and DNA-capsid association occurs. To investigate this hypothesis, two species of
X174 ampicillin-transducing particles were generated by packaging single-stranded versions of unit length plasmids. The plasmids differed in the orientation of one cloned section, which was designed to introduce a large hairpin loop. Differences in migration rates and subpopulation ratios were observed between the transducing particles and wild-type virions.
While this may be one of the first reports of genome-capsid interactions affecting ssDNA viral structure and morphogenesis, the phenomenon has been well documented in ssRNA viruses. FHV RNA stabilizes contact regions (25) via nonspecific interactions with coat protein grooves at twofold axes of symmetry. Deletions of the RNA-interacting residues results in the production of polymorphic structures (17). Packaging FHV with foreign RNA also leads to altered particles (6). Thus, genome-capsid interactions can effect the fidelity of virion morphogenesis, a function commonly associated with viral scaffolding proteins. A dramatic example of a scaffolding-like function for nucleic acids has been observed in Southern cowpea mosiac virus. Deleting the highly basic, RNA-interacting N terminus of the coat protein results in the production of T=1, as opposed to T=3, capsids (44). Similarly, the nature of the RNA packaged in Brome mosaic virus can determine whether T=3 or 120-subunit capsids are formed (35).
The role of DNA-capsid interactions in
X174 is obviously not as dramatic. Procapsid morphogenesis does not require the genome (8, 28, 29); however, two scaffolding proteins mediate this stage of assembly. In the procapsid there are no discernible pentamer-pentamer interactions. The integrity of the capsid appears to be maintained by the scaffolding proteins. After packaging, the internal scaffolding protein is extruded from the structure and replaced by the DNA-binding protein and the tethered genome. This may supplant scaffolding function in the provirion. The provirion-to-virion transition is marked by the release of the external scaffolding protein and the completion of the 8.5-Å radial collapse of coat protein pentamers (15, 16, 31, 38, 39). Genome-capsid interactions may be mediating the magnitude and preserving integrity during the collapse.
This work was supported by a grant from the National Science Foundation (B.A.F.).
|
|
|---|
X174: in vitro synthesis of infectious phage from purified viral components. Proc. Natl. Acad. Sci. USA 78:7285-7289.
X174 by purified components. Proc. Natl. Acad. Sci. USA 80:4195-4199.
X174 bacteriophage capsid. Nature 297:704-707.[CrossRef]
X174 determined by Raman spectroscopy: a model for
X174 DNA packaging. Biochemistry 30:4855-4862.[CrossRef][Medline]
X174 gene A protein mediated termination and reinitiation of
X174 DNA synthesis. I. Characterization of the termination and reinitiation reactions. J. Biol. Chem. 259:10545-10555.
X174: cross-linking studies of the virion and prohead and biophysical characterization of the gene J protein. Ph.D. thesis. University of California, San Diego.
X174. J. Mol. Biol. 288:595-608.[CrossRef][Medline]
X174 gene A protein: a multifunctional enzyme of duplex DNA replication. J. Biol. Chem. 254:5328-5332.
X174 cistron A protein is a multifunctional enzyme in DNA replication. Proc. Natl. Acad. Sci. USA 74:3198-3202.
X174 mutations affecting the morphogenesis or stabilization of the 50S complex, a single-stranded DNA synthesizing intermediate. Genetics 140:1167-1174.[Abstract]
X174. Genetics 128:663-671.[Abstract]
X174 and G4 during phage morphogenesis. J. Bacteriol. 174:2717-2719.
X174. Genetics 134:1003-1011.[Abstract]
X174 in a plasmid is both required and sufficient for in vivo rolling circle DNA replication. Eur. J. Biochem. 149:579-584.[Medline]
X174. J. Virol. 19:409-415.
X174: in vitro analysis of J protein function. J. Virol. 54:345-350.
X174: isolation and characterization of a J gene mutant. Mol. Gen. Genet. 211:72-77.[CrossRef][Medline]
X174, p. 1-71. In R. Calendar (ed.), The bacteriophages, vol. 2. Plenum Publishing, New York, N.Y.
X174 procapsid: purification and structure at 25 Å resolution. Structure 3:353-363.[Medline]
X174 DNA binding protein. Virology 227:370-377.[CrossRef][Medline]
X174 and its functional implications. Nature 355:137-143.[CrossRef][Medline]
X174 at a resolution of 3.0 Å. J. Mol. Biol. 237:517-543.[CrossRef][Medline]
X174 prohead. Proc. Natl. Acad. Sci. USA 76:4877-4881.
X174 lysis, is related to the FK506-binding protein family of peptidyl-prolyl cis-trans-isomerases. J. Biol. Chem. 269:2902-2910.
X174 is a highly specific single-stranded DNA nuclease and binds via a tyrosyl residue to DNA after cleavage. Adv. Exp. Med. Biol. 197:221-230.
This article has been cited by other articles:
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Copyright © 2009 by the American Society for Microbiology. For an alternate route to Journals.ASM.org, visit: http://intl-journals.asm.org | More Info»