INTRODUCTION

Top Abstract Introduction Materials and Methods Results Discussion References

Herpes simplex virus type 1 (HSV-1) nucleocapsids, which consist of an icosahedral capsid surrounding a viral DNA core, are assembled in the nuclei of infected cells. The icosahedral structure is composed of 162 capsomers (150 hexons and 12 pentons). The pentons have fivefold symmetry and are located at the 12 vertices, while the hexons have sixfold symmetry and occupy the edges and faces of the capsid icosahedron (10, 49). Three different capsid types, designated A (empty), B (intermediate), and C (containing DNA), have been isolated by velocity sedimentation of nuclear lysates in virus-infected cells (17, 38, 44, 56). During HSV-1 infection, the replicated concatemeric DNA is cleaved to unit-length genomes and packaged into preassembled capsids with loss of scaffolding protein. The capsid consists of the gene products of UL18 (VP23), UL19 (VP5), UL26 (VP21 and VP24), UL26.5 (VP22a), UL35 (VP26), and UL38 (VP19C) (14, 17, 23, 31, 46, 50). VP5 (major capsid protein), VP19C, VP23 (triplex proteins), and scaffolding proteins are essential for the assembly of an intact capsid (15, 16, 39). Studies on temperature-sensitive mutants have also shown that the gene products of UL6 (36, 50), UL15 (5, 40), UL17, UL25 (1, 3), UL28 (2, 13), UL32 (48), and UL33 (4) are required for the DNA cleavage and packaging process. Mutants lacking these genes have been isolated and characterized to investigate the roles of these genes in the process of DNA encapsidation (6, 21, 22, 25, 37, 47, 54). Almost all of these mutants synthesize near-wild-type levels of viral DNA but do not cleave concatemeric viral DNA into unit-length genomes and accumulate only type B capsids in infected cells. However, the UL25 null mutant is able to cleave the replicated viral DNA and produces both A and B capsids in infected cells (25). These gene products can be divided into two groups based on the DNA packaging process (57). The gene products of UL6, UL15, UL17, UL28, UL32, and UL33 play a role in DNA maturation and the packaging process, while UL25 protein may play a role in the process thereafter, which is known as the head completion process in bacteriophages.

The process of assembling HSV-1 capsids and packaging DNA is similar to that of double-stranded DNA (dsDNA) bacteriophages such as T4, P22, and lambda (9, 27, 28, 43). It is likely that the phenomenon found in UL25 null mutant-infected cells results from an abortive packaging event (25). A similar phenomenon had been observed in mutants defective in the gene products gp4, gp10, and gp26 of phage P22. In cells infected with mutants defective in these genes, the filled capsids are unstable and lose mature DNA within the cells, resulting in the accumulation of empty capsids (41, 51). A role of these gene products is thought to be "head completion": the closing of the channel at the unique vertex and formation of a binding site for the products required for tail attachment. These products are thought to perform some valve-like function at the unique vertex for a translocation of DNA, in addition to having a DNA-stabilizing function (51). Whether UL25 protein has the valve-like function at capsid vertices is unknown; however, it may play such a role in the head completion process, as has been found with dsDNA bacteriophages. In HSV-1, if this is correct, it probably implies that UL25 protein is closely related to the packaging channel (probably penton sites) and added to the vertex after the viral DNA is packaged. However, we cannot exclude the possibility that UL25 protein is incorporated during the process of capsid assembly, because UL25 has been detected in B capsids, in which DNA is not yet packaged. To investigate the above assumption and this possibility, we attempted to determine the location of the UL25 gene product in the capsid, identify its binding patterns in the capsid, and determine when it enters the nucleus of HSV-1-infected cells.

	MATERIALS AND METHODS

Top Abstract Introduction Materials and Methods Results Discussion References

Cells and viruses. African green monkey kidney cells (Vero) and HeLa cells (Riken Cell Bank, Tukuba, Japan) were grown and maintained at 37°C and 5% CO₂ in Eagle's minimal essential medium (EMEM) containing 10% newborn calf serum. The VR3 strain of HSV-1 was used in this study and was propagated in Vero cells in EMEM containing 2% newborn calf serum. For the growth of recombinant baculovirus, Spodoptera frugiperda (Sf9) cells were cultured in Grace's medium (Gibco/BRL) supplemented with 10% fetal bovine serum.

Plasmid construction. The 2.3-kbp BamHI-U fragment containing the entire UL25 gene (nucleotide positions 48813 to 50552) was cloned into pBluescript II SK() to give pBsBam-U. The prokaryotic expression vector pETul25 encodes an amino-terminally polyhistidine (His)-tagged UL25 protein and was constructed as follows. An NdeI site (underlined) was introduced into UL25 start codon by PCR of the BamHI-U fragment. The sequence of the forward primer was 5'-CTCTCGCATATGGACCCGTACT-3'. The sequence of the reverse primer, which lies within the UL25 coding region, was 5'-CGTACACCATGTGTAGCAGAT-3'. The PCR product digested with NdeI and NotI and an NotI/BamHI fragment from pBsBam-U were ligated into the NdeI-BamHI site of the prokaryotic expression vector pET-16b to give pETul25. To construct the eukaryotic expression plasmid, a fragment containing the entire UL25 coding region was derived from pETul25 by digestion with NdeI and BsmI (position 50726). After the ends were blunted, the NdeI/BsmI fragment was ligated into the EcoRV site of the eukaryotic expression vector pcDNA3 to give pDul25. The resulting plasmid was sequenced to confirm the correct insertion of the blunt-ended fragment and to verify the region amplified by PCR. pETul6 encodes a His-tagged UL6 protein and was constructed as follows. An NdeI site (underlined) was introduced into the UL6 start codon by PCR of the genomic DNA. The sequence of the forward primer was 5'-GGTCGCGCATATGACCGCACCAC-3'. The sequence of the reverse primer, which lies within the UL6 coding region, was 5'-GCCGAGATCTCATCGTCGGCCGT-3' (the underline indicates a BglII site). The PCR product digested with NdeI and BglII was ligated into the NdeI-BamHI site of pET-16b.

Antibodies. The histidine-tagged proteins of UL25 and UL6 were expressed in Escherichia coli strain BL21(DE3) by transfection with pETul25 and pETul6. To prepare these proteins, metal chelate chromatography was performed to purify the fusion protein from the soluble form under native conditions, according to the manufacturer's instructions (nickel-nitrilotriacetic acid [Ni-NTA] resin). We prepared a mouse polyclonal antiserum to UL25 and UL6 proteins, using these preparations as immunogens.

Purification of intracellular capsids and virions. Vero cells were infected with HSV-1 at a multiplicity of infection of 5 PFU per cell, and cells were harvested after incubation at 37°C for 12 h. Nuclear lysates were prepared by three cycles of freeze-thawing followed by sonication on ice in TNE buffer (20 mM Tris-HCl [pH 8.0], 0.5 M NaCl, and 1 mM EDTA) containing 1% Nonidet P-40 (NP-40) and protease inhibitor cocktail (10 µM leupeptin, 10 µM pepstatin, and 0.2 mM phenylmethylsulfonyl fluoride). Three types of capsids were purified by banding on a linear 20-to-50% (wt/wt) sucrose gradient centrifugation and pelleted by centrifugation at 57,000 × g for 30 min, as described by Tatman et al. (53). Guanidine-HCl (GuHCl) and urea extraction was carried out by the procedure by Newcomb et al. (34). B capsids were treated with various concentrations of urea in Tris-borate-EDTA (TBE) buffer containing protease inhibitor cocktail for 1 h at room temperature. Extracellular virus was harvested at 18 h postinfection, purified by banding on 5-to-50% (wt/wt) sucrose gradients, and pelleted. Virions were solubilized with 1% NP-40 for 30 min on ice and centrifuged at 12,000 × g for 15 min. The resulting pellets and supernatants contain the tegument and capsid materials and the envelope materials, respectively (24).

Gel electrophoresis and Western blot analysis. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was carried out by adjusting samples to a final concentration of 1% SDS and 5% 2-mercaptoethanol in SDS sample buffer (0.32 M Tris-HCl [pH 6.8], 5% SDS, 25% 2-mercaptoethanol, and 35% glycerol) before boiling them for 3 min. Proteins were developed on 10% or 4-to-12% gradient SDS-polyacrylamide gels. All gels were stained with Coomassie brilliant blue (CBB) or silver. The B capsid extracts with urea were applied to the gels and electrophoresed under nondenaturing conditions (0.025 M Tris and 0.192 M glycine [pH 8.3]).

Immunogold labeling and EM. Immunogold labeling was used to determine the localization of UL25 protein in gradient-purified B capsids. Capsids were adsorbed to carbon-coated electron microscope grids in TBS and fixed in 2% glutaraldehyde-TBS buffer for 2 min. The immunostaining of UL25 protein was carried out in a manner similar to Western blotting. Briefly, fixed capsids on the grids were incubated with UL25 antiserum diluted in TBS-T buffer, washed in TBS-T buffer, and then incubated with protein A conjugated to 10-nm-diameter gold particles. After a wash in TBS-T buffer, capsids were stained with 2% uranyl acetate and examined by electron microscopy (EM). For the negative control, the UL25 antiserum was replaced with nonimmune mouse serum.

Transfections and immunofluorescence analysis. HeLa cells were cultured at 37°C and 5% CO₂ in phenol red-free EMEM containing 10% newborn calf serum. Transient DNA transfections were performed using cationic lipid reagent, and cells were maintained in growth medium for 2 days prior to fluorescence analysis or selection with Geneticin (G418). To obtain the stable transfectant, cells transfected with pDul38 were maintained in selective medium containing 0.5 mg of G418 per ml. After 14 days, G418-resistant colonies (VP19C-expressing cells) were isolated and maintained in selective medium.

Protein-protein interaction analysis. Recombinant baculovirus was constructed with the BacPAK baculovirus expression system (Clontech) as recommended by the manufacturer. Sf9 cells infected with recombinant baculovirus (BacHisUL25) were prepared for purification of the native form of UL25 protein. Sf9 cells were infected with BacHisUL25 at 5 PFU per cell and harvested at 48 h postinfection. Cells were suspended in hypotonic buffer (10 mM Tris-HCl, 50 mM NaCl, and 0.1% Tween 20 [pH 8.0]) and centrifuged at 4,000 × g after undergoing lysis by three cycles of freezing and thawing. Under native conditions, His-tagged UL25 (HisUL25) protein was purified from the resulting supernatants with a Ni-NTA column. To remove a His tag, HisUL25 protein was again applied to the column after overnight incubation in TBS buffer containing 1 µg of factor Xa at 4C°. The flowthrough fraction was dialyzed in 50 mM bicarbonate buffer (pH 8.6) at 4C° before being blotted to a sheet or subjected to biotinylation. To investigate potential interactions of UL25 protein with other virus proteins, two analyses using a soluble form of UL25 protein were carried out, as described below.

(i) Identification of the virus proteins reconstituted with UL25 on the sheet. Native UL25 protein was dot blotted to a PVDF sheet (total area, 0.12 cm²) by vacuum filtration and blocked with 1% (wt/vol) polyvinylpyrrolidone 40 in TBS. Virions were solubilized with 8.0 M urea in TNE buffer containing 1% (wt/vol) bovine serum albumin (BSA) and protease inhibitor cocktail after treatment with 0.5% NP-40 on ice for 30 min. Following an overnight incubation at room temperature, the remaining insoluble proteins were removed by centrifugation prior to reaction with the UL25-blotted sheet. A mixture of solubilized virions and the blotted sheet was renatured by slow stepwise dialysis with a decreasing urea concentration and finally dialyzed with TBS-T buffer. After 3 days of dialysis, the blotted sheet was harvested and washed five times with TBS-T buffer. The bound proteins were eluted with SDS sample buffer from the blotted sheet, developed by SDS-PAGE, and transferred to a nitrocellulose sheet. The stained protein band with 0.1% Ponceau S was excised and digested with TPCK (tosylsulfonyl phenylalanyl chloromethyl ketone)-treated trypsin. Following fractionation by reverse-phase high-pressure liquid chromatography (5C18-AR-300 column), the resulting peptides were subjected to amino-terminal sequencing.

(ii) Far Western blotting. Purified UL25 protein was biotinylated, using an N-hydroxy-succinimide-biotin ester, with an ECL biotinylation module (Amersham). Capsid preparations developed on SDS-10% polyacrylamide gels were electrophoretically transferred to PVDF sheets. The proteins were renatured by washing three times with TBS-T buffer (containing 5 mM 2-mercaptoethanol and 10% glycerol), followed by an overnight incubation at 4°C. The sheet was then blocked with 5% skim milk in TBS buffer, and reacted overnight with biotin-labeled UL25 in TBS-T buffer containing 5% BSA at 4°C. Excess probe was removed by five washes in excess TBS-T buffer. Detection was by incubation with HRP-probed streptavidin and ECL.

Gel mobility shift analysis. To investigate whether UL25 protein has the inherent capacity to bind DNA, we constructed a two-dimensional gel electrophoresis system. The soluble form of UL25 protein was prepared from Sf9 cells infected with BacHisUL25. Plasmid pQul32(c191) is a pQE30-derived UL32 expression plasmid in which the BamHI/SalI fragment of UL32 is inserted into BamHI/SalI sites. The UL32(c191) protein, which expressed in BL21(DE3) cells, was made up of the C-terminal 191 amino acids (residues 274 to 464) of UL32 protein with a His tag. These two proteins were purified with a Ni-NTA column and analyzed by SDS-PAGE (12% polyacrylamide gel). To prepare genomic DNA of HSV-1 or baculovirus (BacPAK6), the extracellular virions purified by the sucrose gradients were incubated for 12 h at 50°C in 0.1 M Tris-HCl (pH 8.0) containing 1% SDS, 5 mM EDTA, and 0.1 mg of proteinase K/ml after treatment with RNase (final concentration of 10 µg/ml), and organic extraction and ethanol precipitation were subsequently carried out. Baculovirus DNA was digested with Bsu36I.

	RESULTS

Top Abstract Introduction Materials and Methods Results Discussion References

UL25 protein is part of the penton and the hexon structures. If the HSV-1 capsid vertex (penton) serves as the site for DNA entry, one of the DNA-packaging proteins, UL25, is probably associated with the penton. Figure 1 shows SDS-PAGE (CBB stain) and Western blot (immunoblot) analyses of B capsid extracts with GuHCl and urea. To determine the strength of the association between UL25 protein and HSV-1 capsid, B capsids were treated with 0, 0.5, and 2.0 M GuHCl. As shown in Fig. 1A, the amounts of stained VP5 bands among B capsid extracts did not differ much, whereas UL25 protein with significant loss of signal intensity was detected at 2.0 M. The UL25 protein may be part of the penton, on the basis of the previous reports (30, 34) that 2.0 M GuHCl extraction results in the removal of the penton of capsids. However, if UL25 is bound loosely to regions other than the pentons, some UL25 proteins may be stripped off by this extraction. The result of separation of B capsid extracts (Fig. 1B) shows that the 6.0 M urea extraction resulted in the complete removal of the scaffold proteins (VP22a) (Fig. 1B, lane 5 in the CBB-stained gel) and in some extraction of VP5, VP19C, and VP23 to the supernatants (lane 4). Both extracts contained UL25 protein, as shown in the immunoblot. For an accurate comparison of UL25 protein between supernatants and pellets, the globin proteins (Fig. 1B, lane 2), as internal standards, were added to B capsid samples (lane 3), and extraction with 6.0 M urea was carried out. The globin was almost undetectable in the pellets (lane 5). The amount of samples applied to a PVDF sheet was corrected by the amount of VP5 between these two extracts, and dot immunoblotting was carried out after serial dilution of these extracts. This dot immunoblot analysis (Fig. 1C) shows that the supernatants contain 1.5 to 2 times more UL25 protein than the pellets.

View larger version (32K): [in this window] [in a new window]   FIG. 1.   Detection of UL25 protein in B capsids extract with GuHCl. (A) B capsids were extracted with various concentrations of GuHCl. The preparations were subjected to SDS-PAGE, stained with CBB, and analyzed by Western blotting using UL25 antiserum (immunoblot). (B) The 18-kDa globin, as an internal standard (st), was added to B capsids (lane 3; cap) prior to the 6.0 M urea extraction. The B capsid samples with urea were centrifuged through a 20% sucrose cushion to give supernatants (lane 4; sup) and pellets (lane 5; pel). The resulting samples were subjected to SDS-PAGE and analyzed by Western blotting using UL25 antiserum. (C) These two samples were solubilized with urea at a final concentration of 8.0 M and serially diluted in TBS containing 8.0 M urea, prior to dot blotting on PVDF sheet. The UL25 on the sheet was detected by Western blotting after a washing in TBS-T buffer. The positions of molecular mass markers (M; in kilodaltons), capsid proteins, and of UL25 (arrows) are indicated.

View larger version (76K): [in this window] [in a new window]   FIG. 2.   Electron microscopic immunostaining. B capsids were purified by gradient ultracentrifugation. B capsids were adsorbed to carbon grids and fixed in 2% glutaraldehyde. The grids were incubated with UL25 antiserum (B, D, E, and F) or normal mouse serum (A and C) and washed. Following incubation with 10-nm-gold-conjugated protein A, capsids were stained with uranyl acetate and examined by transmission electron microscopy. Arrows indicate gold particles on capsid vertices. Images of negative film are shown.

Interaction of UL25 protein with other virus proteins. The association of UL25 protein with capsids indicates that UL25 has to interact with other proteins of virions (probably capsid proteins). To clarify if this is the case, we analyzed potential interactions of UL25 protein with virion proteins, by reconstitution of virions solubilized with 8.0 M urea on the UL25 protein immobilized on a PVDF sheet. SDS-PAGE analysis of the proteins bound on the UL25 sheet reveals six proteins of 150, 120, 80, 52, 34, and <30 kDa (asterisks and dots) as shown in Fig. 3A. The 150- and 34-kDa proteins were subjected to amino-terminal sequencing after trypsin digestion. The amino-terminal sequences of these peptides correspond to the predicted fragments (residues 288 to 294 and residues 1157 to 1167) of VP5 and the predicted fragments (residues 83 to 89 and residues 308 to 314) of VP23. The 52-kDa protein is probably VP19C, as determined by far-Western analysis (Fig. 3B). The 120- and 80-kDa bands were phosphorylated proteins of the serine or tyrosine type (data not shown). It is likely that these two are tegument proteins. The bands of about 45 kDa and less than 30 kDa could not be characterized. It is unknown whether renatured capsid proteins form capsid-like complexes. This result, however, suggests that the reconstitution of some capsid substructures on the UL25 sheet may have occurred by renaturation from these solubilized proteins (VP5, VP19C, VP23, and others) in 8.0 M urea.

View larger version (57K): [in this window] [in a new window]   FIG. 3.   Protein-protein interaction of UL25 with virus proteins. (A) Identification of virus proteins reconstituted with UL25 on sheets; (B) far-Western analysis of UL25 binding to virus proteins. (A) A mixture of virus proteins solubilized with 8.0 M urea and PVDF sheets blotted with UL25 (lane 2) or not (lane 3) were renatured by stepwise dialysis. This dialysis allows virus proteins to bind UL25 protein on PVDF by reconstitution of interactive proteins. Virion proteins (lane 1) and proteins reconstituted on UL25 sheets (lane 2) were analyzed by SDS-PAGE. Asterisks and dots indicate the proteins reconstituted with UL25. Following trypsin digestion of bound proteins (asterisks in lane 2), the result obtained by amino-terminal sequencing of the digested peptides is shown on the right. The 65-kDa band appears to be more intense in lane 2 than in lane 3, since bands of UL25 and BSA are overlapping. The migration of molecular mass markers is shown on the left. (B) HSV-1 B capsids were extracted with 0 (lane 1), 3.0 (lane 2), and 6.0 (lane 3) M urea. These extracts (lane 1 to 3), Vero cells (lane 7), purified virions (V, lane 4), and their tegument-capsid (T/C, lane 5) and envelope (E, lane 6) components were subjected to SDS-PAGE (CBB stain) and far-Western analysis using biotin-labeled UL25. An arrowhead indicates the VP19C band.

Relocation of UL25 protein into the nucleus. Since capsid assembly takes place in the nucleus, UL25 protein must be localized in the nuclei of HSV-1-infected cells. In a number of heterogenous expression systems, the use of GFP as a tag appears to not interfere with properties of proteins tagged with GFP. To obtain a UL25 chimeric protein possessing a fluorescent tag, we fused GFP to the N terminus of UL25. The deduced molecular masses of UL25 and GFP are 62.5 kDa (580 amino acids) and 27 kDa (238 amino acids), respectively. Fusion of the two sequences gave a chimera of about 89.5 kDa (819 amino acids). As shown in Fig. 4A, panel f, GFP-tagged UL25 protein (GFP-UL25) with a molecular mass of about 90 kDa was detected in pDGFPul25-transfected cells but not in pDGFP-transfected cells. Cells transfected with pDGFPul25 or pDGFP were analyzed with a confocal microscope. When native GFP is expressed, fluorescent GFP can be visualized as a diffuse distribution in the cytoplasm (Fig. 4A, panel d). Similarly, when GFP-UL25 is expressed, fluorescence exhibits a cytoplasmic pattern (Fig. 4A, panel a). To investigate the influence of HSV-1 infection on the distribution of GFP-UL25, transfected cells were infected and fixed at various times after infection (Fig. 4A). The expression of GFP alone exhibits a diffuse or punctate distribution throughout the cytoplasm at 12 h postinfection (Fig. 4A, panel e). The GFP also showed no changes in its distribution at 24 h after infection (data not shown). However, HSV-1 infection had the effect of relocating GFP-UL25 into the nucleus long after infection (Fig. 4A, panels b and c). These results suggested that UL25 protein does not have a nuclear localization signal but may be transported into the nucleus by an association with other virus proteins in the late period of HSV-1 infection.

View larger version (80K): [in this window] [in a new window]   FIG. 4.   Intracellular localization of UL25. (A) Nuclear relocation of UL25 by HSV-1 infection. Cells were transfected with pDGFPul25 (a, b, and c) or pDGFP (d and e). After 60 h of transfection, cells were infected with HSV-1 at 10 PFU of virus per cell and then fixed at 0 h (a and d), 12 h (b and e), and 24 h (c) after infection. GFP fluorescence of these fixed cells was analyzed by a confocal microscope. HeLa cells (60-mm culture dishes) transfected with pDGFPul25 or pDGFP were cultured for 3 days and harvested. Cells were sonicated in TNE buffer on ice and centrifuged at 3,500 × g for 10 min. The resulting supernatants of cells expressing GFP-tagged UL25 (GFP-UL25) and GFP were analyzed by Western blotting using UL25 antiserum (f). The position of a chimeric protein (90 kDa) is indicated. (B) Coexpression of UL25 with VP19C. VP19C-expressing cells were further transfected with pDGFP (a and b) or pDGFPul25 (c and d). Phase, phase-contrast microscopy of tagged protein. Cells were cotransfected with pDGFPul38 and pDul25. Merged, merged image with UL25 immunostaining using a Texas red probe. (g and h) Expression of GFP-tagged VP19C alone (pDGFPul38) and unmodified UL25 protein (pDul25). Arrows (d and g) indicate the fluorescence in the nucleus.

Potential capacity of UL25 protein to bind DNA. The functional role of UL25 protein is to retain DNA in the capsid (25). The UL25 protein may achieve this through an inherent capacity to bind DNA. We investigated the interaction between UL25 protein and genomic DNA prepared from virions. The UL25 protein was purified from BacHisUL25-infected Sf9 cells with a Ni-NTA column under native conditions. The proteins with molecular masses of 62 kDa (full-length UL25 protein with an N-terminal histidine tag) and 28 kDa were purified with the Ni-NTA column (Fig. 5A). This 28-kDa protein probably corresponds to a proteolytic fragment of the N-terminal portion of UL25 protein, since this protein has a His tag as shown in Fig. 5A, lane 3 (Ni-HRP). The mixtures of UL25 proteins with and without genome DNA were subjected to agarose gel electrophoresis (Fig. 5B, lanes 1 to 3), and the proteins bound to DNA in gels (indicated by frames) were analyzed by dot immunoblotting. The UL25 protein was detected in the gel extract of HSV-1 DNA (Fig. 5B, dot 1) but not in the extract of baculovirus DNA (dot 3) or the extract with no DNA (dot 2). Moreover, when UL32(c191) with a His tag (made up of the C-terminal 191 amino acid residues of UL32) was used in place of UL25 protein as a control (Fig. 5B, lanes 4 to 6), UL32(c191) was not detected in gel extracts of either viral DNA (dots 4 to 6). This suggests that the interaction of UL25 protein with HSV-1 DNA may be specific.

View larger version (47K): [in this window] [in a new window]   FIG. 5.   Interaction between UL25 and genomic DNA. (A) SDS-PAGE analysis of UL25 and UL32(c191) proteins. These His-tagged proteins were prepared from HisUL25-expressing Sf9 cells and UL32(c191)-expressing BL21(DE3) cells and purified with a Ni-NTA column. The molecular masses (in kilodaltons) are on the left. The two proteins were analyzed by Western blotting using a Ni-NTA HRP conjugate (Ni-HRP). (B) Mixtures of UL25 with HSV-1 DNA (lane 1; hsv) and with baculovirus DNA digested by Bsu36 I (lane 3; bac) and protein without genomic DNA (lane 2) in binding buffer were applied to a 1.5% agarose gel in the first dimension. Then UL32(c191) was used in place of UL25 and applied to a gel (lanes 4 to 6). Lane M, 1-kb DNA ladder marker. Genomic DNA () and the degenerated salmon DNA () are indicated. (Bottom) Dot immunoblot assay of the extracts obtained from each lane (outlined). The His-tagged proteins included in these extracts were detected with the Ni-NTA HRP conjugate. The dot number corresponds to the lane number in the ethidium bromide-stained gel. In the dots labeled pc (ul25) and pc (ul32), UL25 and UL32(c191) were directly dot blotted to the sheet as positive controls. (C) Gel mobility shift analysis of UL25 by two-dimensional (2D) gel electrophoresis as described in Materials and Methods. The bands from lanes 1 and 2 in panel B were subjected to SDS-PAGE in the second dimension and analyzed by Western blotting using UL25 antiserum. The arrowhead and dot indicate the positions of genomic DNA and degenerated salmon DNA, respectively. Asterisks indicate oligomers of the 28-kDa protein. The 28-kDa band marked with an arrow likely represents a proteolytic fragment of UL25 (see the text).

Comparison of UL25 protein between B and C capsids. If UL25 protein plays a role in head completion similar to that found with dsDNA bacteriophage, C capsids may contain more UL25 protein than B capsids. Therefore, we compared the amount of UL25 or the 75-kDa protein (as a control protein) in B and C capsids. This 75-kDa band was UL6 protein, and its amount may differ somewhat between the two types of capsid. The immunoblot in Fig. 6A shows that C capsids contain somewhat more UL25 protein than B capsids. Quantitative analyses of the stained gels (Fig. 6A) indicate that the percentages of UL25 relative to VP5 in C capsids (5.7%) were two to three times larger than those in B capsids (2.2%), as shown in Fig. 6B. However, there was not much difference in the amount of 75-kDa protein (UL6) between the two types of capsid (4.6% in B and 4.0% in C capsids). There may be much more UL25 protein in C than in B capsids. As shown in Fig. 6A, C capsid fractions contained some B capsids (less than 15%), since the band of about 40 kDa (VP22a) is observed in lane 1. However, since the difference in protein composition between B and C capsids is observed in lane 1 of Fig. 6A (60-kDa band), further investigation of this difference will be necessary.

View larger version (64K): [in this window] [in a new window]   FIG. 6.   Comparison of the amount of UL25 in B and C capsids. The two types of capsid were prepared by two cycles of a linear sucrose gradient. (A) B and C capsids were subjected to SDS-PAGE, stained with CBB, and analyzed by Western blotting using UL25 or UL6 antiserum (immunoblot). The B capsid samples were serially diluted in TBS buffer (4× to 1×) prior to SDS-PAGE. Lanes 1 and 2 and lanes 3 and 4 of the immunoblot correspond to lanes 1 and 2 of the CBB-stained gel. Arrowheads and arrows indicate the position of 75-kDa (UL6) and UL25 proteins, respectively. M, molecular mass markers (masses, in kilodaltons, are on the left). (B) The amounts of proteins (VP5, UL6, and UL25) were measured by densitometric scanning of each lane in the CBB-stained gel. Values are the means ± standard deviations for three independent measurements in B and C capsids.

	DISCUSSION

Top Abstract Introduction Materials and Methods Results Discussion References

The DNA packaging machinery of HSV-1 is likely to be analogous to that of dsDNA bacteriophages (30, 42). The bacteriophage prohead also includes a portal vertex that serves as the site for DNA entry (7) as well as for DNA injection into the host cell (20). Such a unique vertex has not been defined in herpesviruses; however, the pentons may serve as the site for a translocation of DNA. In HSV-1, the penton channels (with a minimum diameter of ~40 Å) may be better suited to the transport of genomic DNA than the hexon channels (with a diameter of ~20 Å), since dsDNA has a diameter of approximately 22 Å (12, 59). For this reason, capsid proteins required for the translocation of DNA have to exist at penton sites or sites near the penton channel.

EM analysis has shown that 6.0 M urea extraction of B capsids results in the removal of the pentons (30, 34). On the basis of this finding, the results of separation of B capsid extracts (Fig. 1) indicate that UL25 may also exist at the penton sites. This study was begun to clarify the presence of the UL25 in pentons. For this aim, we examined immunolocalization of this protein by EM. As shown in Fig. 2, it is probable that UL25 is located in capsid vertices and is associated with pentons. Although there are approximately 42 copies of UL25 per B capsid, the amount of immunogold associated with capsid was small (one to four particles per 12 vertices). Approximately half the UL25 should be associated with capsid substructures beside pentons (Fig. 1C). However, the binding of gold particles to these substructures (probably hexons) was not observed in many cases. These findings indicate that the UL25, a minor capsid protein, is associated with both pentons and hexons, but many UL25 molecules may not be exposed to the outer surface of the capsid shell.

The assembly of HSV-1 capsids is known to take place in the nuclei of HSV-1-infected cells. However, the UL25 itself does not move into the nucleus until the late stage of HSV-1 infection (Fig. 4A). Moreover, both UL6 and UL25 are incorporated into capsids assembled in the infected cells along with recombinant baculoviruses that express a series of capsid proteins (25). These results suggest an association of UL25 with other capsid proteins expressed at later stages of infection. In capsid assembly, capsid proteins move into the nucleus through interactions with VP19C (which forms heterotrimeric triplexes) and with the scaffolding protein (which forms pre-VP22a-VP5 complexes) (32, 35, 45, 55). Figure 3B shows the direct interactions of UL25 with VP5 and VP19C. This indicates the possibility that UL25 is transported to the nucleus and arrives at the procapsid through these interactions. However, UL25 could be bound indirectly to VP5, VP19C, and VP23, as shown in Fig. 3A. Coexpression with VP19C relocates UL25 into the nucleus in transfected cells (Fig. 4B). The fact that VP19C is a late or true late (2) HSV-1 protein and has the capacity for nuclear localization (45) makes it suited to the relocation of UL25 at the late stage of infection. Thus, the association with VP19C is likely to be involved at least in the early incorporation of UL25 into the capsid. The UL25 must be incorporated into the capsid (and pentons) through at least two routes, because there was a difference in amount between B and C capsids (Fig. 6B). One route is through the assembly process of the capsid as described above; another is through the DNA-packaging process after the capsid is complete.

How does UL25 function to maintain the genomic DNA within the capsid? The abortive packaging event in UL25 null mutant-infected cells (25) had also been shown in the cases of mutants defective in gp4, gp16, and gp26 of P22 phages (41, 42). These head completion proteins of P22 phages are added at a unique vertex composed of the portal protein for plugging the channel after DNA packaging. If UL25 plays a role analogous to the role of these proteins, it may be incorporated into pentons when DNA is packaged. The larger amount of UL25 in C than in B capsids (Fig. 6) suggests that this is possible and that it may function to plug the packaging channel. A unique vertex and a plugging device have not been defined for HSV-1 (29, 33, 58). The addition of UL25 after DNA packaging, however, may be specific to pentons (especially the packaging channel). The portal proteins of dsDNA bacteriophages are required for initiation of procapsid assembly and are assembled into a unique vertex (9, 43). However, some of those (for example, gp1 of phage P22) are not required for this initiation and are incorporated into the procapsid by interacting either with coat proteins or with the growing procapsid shell (7, 8). There is little sequence homology of the portal proteins among dsDNA bacteriophages. However, the portal proteins of some phages appear to contain DNA binding motifs such as a helix-turn-helix sequence (19). One study reported that the portal protein (p10) of phage 29 has non-sequence-specific DNA binding capacity and binds preferentially to the ends of DNA in the presence of the terminal protein p3 (18). Moreover, p10 is involved in the closure of packaging channels after DNA translocation (26, 52). Thus, p10 plays a role in docking the terminase-DNA complex to a portal vertex and in some head completion processes. Both UL6 and UL25 may play a role analogous to that of p10. Since UL6 appears not to be added after DNA is packaged (Fig. 6), it is likely that UL6 and UL25 principally function in the docking and in the completion event, respectively. These proteins may function independently or in concert in the encapsidation process. All capsid vertices (12 pentons) may have the potential to serve as the translocation site of viral DNA in HSV-1 (29, 58). However, the DNA has to enter the capsid through only one vertex. According to gel mobility shift analysis, the UL25 protein (especially its amino-terminal residue) appears to have the potential to bind DNA. Moreover, UL25 is associated with the capsid vertices, as shown in Fig. 2.

An assumption of the potential roles of these proteins can be made on the basis of these findings. When one of the 12 vertices encounters the terminase-DNA complex, UL6 works to dock this complex at the vertex. Once initiation has occurred, this vertex functions as the packaging channel and packaging is polarized. However, it is possible that 1 or 2 of the 12 vertices function as packaging vertices, since there may be differences in the amount of UL25 among 12 vertices (Fig. 2D to F). A model for the potential roles of the packaging proteins proposed by Yu and Weller suggests that UL25 also enhances the turnover ratio of the terminase (UL15) by dissociating it from the capsids, after viral DNA is packaged (57). This potential interaction between UL25 and UL15 is thought to be analogous to that between p10 (portal protein) and p3 (terminal protein) in phage 29. Taken together, these results indicate that when the DNA fills the capsid and is cut in relation to a sequence-specific mechanism ("a" sequences), UL25 may bind the terminase-DNA complex, disengage the DNA from this complex, and trap the DNA at this vertex. Thus, UL25 may play a role in the termination of packaging by trapping the DNA and then closing the packaging channel by a new addition of this protein (as found in C capsids). It cannot be concluded from the present results alone whether UL25 binds to DNA in a sequence-specific fashion. Much of the UL25 in B capsids is not likely to be exposed to the outer shell surface (Fig. 2), and some of the proteins may be exposed to the capsid floor. Cryomicroscopic analysis of C capsids suggests that the outermost layer of the packaged DNA has been in contact with the floor of pentons (58). This contact may be due to the triplexes forming the capsid floor (11) or the UL25 exposed to the floor. Moreover, DNA fibers that can be traced to the capsid of origin are rarely observed in B capsid fractions by the immunogold-EM analysis. In this case, UL25 has bound to some of three portions, the origin (at the vertex), the end, and the bending site of the DNA fiber (data not shown). Whether this binding takes place through the terminase is unknown; however, this binding is likely to be sequence specific. These results suggest that UL25 may nonspecifically bind the DNA condensed within the capsid, while it may recognize the DNA end by replacing the terminase of the DNA complex at the packaging vertex.

UL25 is incorporated at an early stage of capsid assembly and then waits for viral DNA to be packaged. To complete the packaging process, the UL25 may anchor the DNA to the vertex that initiated DNA packaging. Thus, the UL25 gene product may be a DNA-anchoring protein.