INTRODUCTION

Top Abstract Introduction Materials & Methods Results Discussion References

African swine fever virus (ASFV) is a complex enveloped deoxyvirus with unique features among the DNA-containing viruses (9, 44). Large DNA viruses include families of icosahedral viruses (Herpesviridae and Iridoviridae) and brick-shaped viruses (Poxviridae). ASFV does not fit well into any of these groups because, although its genome structure is similar to that of poxviruses (17, 39), its icosahedral structure is like that of iridoviruses (2, 7). So far, ASFV is the only member of an unnamed family of animal DNA viruses (12). The viral genome is a single molecule of double-stranded DNA that, in the case of the avirulent strain BA71V, comprises about 150 open reading frames (45). The viral particle contains more than 30 different polypeptides (6) and, in spite of being an enveloped virus, lacks major glycoproteins (11). At least six of the major ASFV structural proteins (p150, p37, p35, p34, p15, and p14) are synthesized as polyprotein precursors (pp220 and pp62), which is an unusual feature in a DNA virus (36, 37).

The virus particle possesses a complex structure formed by several concentric domains with an overall icosahedral shape and a diameter of about 200 nm (7). The viral core is composed of a DNA-containing nucleoid enclosed by a thick protein layer, the core shell, which contains the mature products derived from polyprotein pp220 (3). The core is successively surrounded by a inner lipid envelope, a capsid formed by protein subunits arranged in a hexagonal lattice, and, finally, an outer lipid envelope acquired by budding at the cell surface (3, 4, 7). ASFV morphogenesis takes place in discrete cytoplasmic areas, the viral factories, where the replication of the viral DNA also occurs (3-5, 14, 23). These areas contain abundant membrane-like structures, which represent the first morphological evidence of virus assembly. Viral membranes engulf the core material while acquiring a polyhedral shape by the assembly of the outer capsid layer (3). To facilite the study of ASFV assembly, we have recently developed a system for inducible gene expression from ASFV recombinants (15). Using this approach, we showed that the formation of the capsid on the inner envelope is a progressive process depending on expression of protein p72, the major component of the capsid.

In the present study, we have focused our attention to the origin and the mechanism of acquisition of the inner viral envelope. In general, enveloped viruses acquire their membranes from specific host cell compartments where certain viral membrane proteins are targeted (19, 26, 40). Envelopment usually takes place through a budding process whereby the virus particle is wrapped by a single membrane and leaves its original compartment. However, a striking exception has arisen in recent studies on the assembly of two large DNA-containing viruses, the poxviruses and the herpesviruses. For both of these classes, it has been shown that the viruses become enwrapped by cellular membrane cisternae, thus acquiring two lipid membranes in a single step (16, 29, 33, 38, 43). With regard to ASFV, a recent report by Cobbold et al. (8) has suggested that ASFV is enveloped by the endoplasmic reticulum (ER). Such a proposal was based on indirect data such as the comigration in sucrose gradients of viral protein p72 with the luminal ER marker protein disulfide isomerase (PDI) and on the apparent colocalization of PDI with the viral factories in immunofluorescence experiments.

In the present work, we provide morphological and immunocytochemical evidence showing that the ASFV inner envelope is indeed composed of two juxtaposed membranes derived from an ER cisterna. A new model for the structure and assembly pathway of ASFV is therefore presented.

	MATERIALS AND METHODS

Top Abstract Introduction Materials & Methods Results Discussion References

Cells and viruses. Vero cells (ATCC CCL81) were cultured in Dulbecco's modified Eagle's medium supplemented with 10% newborn calf serum, which was reduced to 2% during viral infection. The ASFV strain BA71V, adapted to grow in Vero cells, has been described previously (13). Highly purified extracellular ASFV was obtained by Percoll equilibrium centrifugation (6). The recombinant virus vA72, which inducibly expresses the major capsid protein p72 (15), was propagated in the presence of 2 mM isopropyl--D-thiogalactopyranoside (IPTG). Infections with parental BA71V and recombinant vA72 viruses were carried out at a multiplicity of infection of 10 PFU/cell.

Antibodies. Rabbit polyclonal serum and mouse monoclonal antibody (MAb) 24A.G4 against the ASFV proteins pp220/p150 have been described previously (32, 36). Rabbit antiserum against PDI was kindly provided by J. G. Castaño (Instituto de Investigaciones Biomédicas, Madrid, Spain) (24). Mouse MAb and rabbit serum against ER membrane protein p63 were obtained from A. Schweizer and J. Rohrer (Biocenter, Basel, Switzerland) (35). Rabbit serum against membrane ER glycoproteins (anti-MERG) was a gift from D. I. Meyer (University of California, Los Angeles, Calif.) (27). Rabbit antiserum against galactosyltransferase was a gift from Eric Berger (Physiologisches Institut, Zurich, Switzerland) (30). Mouse MAb against membrane protein p53 was kindly provided by H.-P. Hauri (Biocenter, Basel, Switzerland) (34). MAb 25H8 against the cis-Golgi network membrane protein gp74 (1) and rabbit serum to the cis-medial-Golgi protein gp100 (46) were kindly provided by I. Sandoval (Centro de Biología Molecular "Severo Ochoa," Madrid, Spain). Mouse MAb 1D3 against PDI was obtained from Stressgene Biotechnologies Corp. (Victoria, British Columbia, Canada) (42), and rabbit serum against cathepsin L was obtained from BioAss (Diessen, Germany).

Light microscopy. Vero cells were grown to ca. 70% confluency in chamber slides (Lab-Tek, Nunc) and then infected at 1 PFU per cell with ASFV BA71V. For immunofluorescence labeling, the cells were fixed after the indicated times with methanol at 20°C for 5 min. For staining of the trans-Golgi network, the cells were fixed with 3% paraformaldehyde for 15 min at room temperature and incubated with C₆-NBD-ceramide (Molecular Probes Inc., Eugene, Oreg.) as previously described (25). Double-labeling experiments were performed by incubating together the two primary antibodies and, subsequently, the two secondary antibodies at 37°C for 1 h. As a control, each antibody was tested individually. The secondary antibodies Texas red-linked donkey anti-rabbit, Texas red-linked sheep anti-mouse, and fluoresceinated donkey anti-rabbit antibodies were obtained from Amersham Life Science. The fluoresceinated goat anti-mouse immunoglobulin G was obtained from Tago Inc. (Burlingame, Calif.). The coverslips were mounted on glass slides with Moviol, examined with an Axiovert fluorescence microscope (Carl Zeiss, Inc., Oberkochen, Germany), and photographed with Kodak film (TMAX; ASA 400).

Electron microscopy (EM). For conventional Epon section analysis, ASFV-infected Vero cells were fixed with 2% glutaraldehyde-2% tannic acid in 200 mM cacodylate buffer (pH 7.4) at room temperature for 1 h. Postfixation was carried out with 1% OsO₄ and 1.5% K₃Fe(CN)₆ in cacodylate buffer at 4°C for 30 min. After extensive washing with distilled water, the samples were dehydrated and embedded in Epon.

Detergent and protease treatments of virus particles. Suspensions of highly purified virions in PBS were incubated with 0.5% -D-octylglucopyranoside or 0.5% Nonidet P-40 in PBS for 5 min at room temperature. After the treatment, the virus particles were sedimented in a Beckman Airfuge at 100,000 × g for 5 min, fixed with 2% glutaraldehyde for 1 h, and processed for Epon embedding.

	RESULTS

Top Abstract Introduction Materials & Methods Results Discussion References

The inner envelope of ASFV is a double-membrane domain. Figure 1A to C show extracellular ASFV particles processed by three different EM methods: conventional Epon embedding (Fig. 1A), cryosectioning (Fig. 1B), and negative staining of whole particles (Fig. 1C). All these images show that ASFV consists of a core surrounded by three concentric shells with an overall icosahedral shape. However, the nature of these layers can be differently interpreted depending on the technique used. Thus, all of them look usually like lipid membranes in both Epon sections and cryosections. However, the intermediate layer, as visualized by negative staining, clearly shows the regular array of globular protein units composing the viral capsid (Fig. 1C). Therefore, we interpret these three layers as an inner lipid envelope, a protein capsid, and an outer lipid envelope (Fig. 1A to C). It is well established that the outermost envelope is a single lipid membrane acquired by budding at the cell surface (4). The first goal of the present study was to determine the nature of the innermost envelope.

View larger version (136K): [in this window] [in a new window]   FIG. 1.   Structure and assembly of ASFV. (A to C) Extracellular ASFV particles processed by Epon sectioning (A), cryosectioning (B), and negative staining (C). All these EM methods reveal an overall structure consisting of a central core surrounded by three layers: the inner envelope (ie), the capsid (c), and the outer envelope (oe). Note that in the negatively stained particle, individual capsomers (small arrows in panel C) are evident within the capsid. (D to J) Ultrathin Epon sections of viral intermediates from infected Vero cells permeabilized at 18 to 24 h p.i. Intracellular ASFV particles mature from precursor viral membranous structures (pvm) present in the viral factories (D), which become polyhedral particles by the gradual formation of the capsid on one of their faces (D and E). The short arrows in panel E indicate the limits of capsids assembling on the inner envelopes. Note also the electron-dense core material underneath the concave side of the inner envelope (E). Close inspection of the assembly intermediates revealed two distinct membranes within the precursor membranous structures (arrowheads in panel F) as well as in polyhedral assembling particles (arrowheads in panels G to J). Note that the ends of open particles (H to J) appeared as membrane loops, which suggests that ASFV becomes enwrapped by a collapsed two-membraned cisterna. Bars, 50 nm.

View larger version (125K): [in this window] [in a new window]   FIG. 2.   Selective disruption of ASFV particles. (A) Epon section of an intact intracellular particle showing the central core successively enclosed by the inner envelope (ie) and the outer capsid (c). (B to E) Epon sections of intracellular virions incubated with proteinase K. At 20 h p.i. infected Vero cells were perforated by hypotonic lysis and subsequently incubated with proteinase K for 30 min at room temperature. After the proteinase treatment, intracellular particles had lost the capsid but not the inner envelope (B). Importantly, in highly damaged virions the inner envelope appeared dissociated in two distinct membranes (arrowheads in panels C to E). Note also the dramatic alteration of their icosahedral morphology. (F and G) Epon sections of purified extracellular particles treated for 30 min with the nonionic detergent -D-octylglucopyranoside. Note the lack of the outer and the inner envelopes and the partial disruption of the viral core. Note also that the capsid remains apparently intact and the resulting particles retain their polyhedral shapes. Bars, 50 nm.

Relationship of ASFV assembly sites to cellular compartments. To analyze the origin of the ASFV inner envelope, our first step was to explore the possible colocalization of a set of well-characterized markers of cell organelles with the viral factories. For this, double-immunofluorescence experiments were performed on infected Vero cells fixed at 14 to 16 h p.i. The location of viral factories was determined with specific antibodies to ASFV polyprotein pp220 (32, 36) (Fig. 3B, D, F, and H). The ER was visualized with a MAb (42) (results not shown) and a polyclonal serum (24) (Fig. 3A) against the luminal marker PDI, the membrane protein p63 (35) (results not shown), the membrane marker of the intermediate compartment p53 (34) (results not shown), and a purified extract of membrane ER glycoproteins (anti-MERG [27]) (Fig. 3C). All the tested ER markers were essentially excluded from the cytoplasmic viral factories. However, it was evident that the ER labeling closely encompassed the assembly sites (compare Fig. 3A and C with Fig. 3B and D, respectively).

View larger version (94K): [in this window] [in a new window]   FIG. 3.   Immunofluorescence analysis of ER and Golgi marker proteins in ASFV-infected cells. Infected Vero cells were fixed at 12 to 16 h p.i. with methanol at 20°C. Double-labeling experiments were performed with antibodies to ASFV polyprotein pp220 to stain the viral factories (B, D, F, and H) and with antibodies to different ER and Golgi proteins (A, C, E, and G), as follows. For ER labeling, a rabbit antiserum to the luminal marker PDI (A) and a rabbit antiserum to membrane ER glycoproteins (C) were used. For Golgi labeling, a MAb to the membrane glycoprotein gp74 (E) and a rabbit serum to galactosyltransferase (G) were used. The antibodies to pp220 were a mouse MAb (24A.G4) (B, D, and H) and the rabbit antiserum anti-pp220/p150 (F). Double labeling was developed with fluorescein-coupled secondary antibodies for the assembly sites and Texas red-conjugated antibodies for the organelle markers. Note that viral factories (arrows) essentially exclude the ER and Golgi markers but are closely encompassed by them.

View larger version (139K): [in this window] [in a new window]   FIG. 4.   Relationship between viral membranes and ER membranes. Ultrathin Epon sections of ASFV-infected Vero cells at 24 h p.i. are shown. (A) Viral factories (VF) were usually encompassed by an enlarged Golgi complex (G) and ER cisternae (ER). The plasma membrane (PM) and the nucleus (N) are also indicated. (B to D) At the limits of the assembly sites, a close association between ER membranes and viral structures was often evident. (B) Several precursor viral membranes (pvm, arrows) are present between two cellular cisternae (arrowheads). Note the presence of electron-dense viroplasmic material associated with both viral and cellular membranes. (C) An apparently collapsed ER cisterna (small arrowheads) with attached ribosomes (large arrowheads) is in close vicinity to precursor viral membranes. (D) Eventually, direct continuities (arrow) between membranes with attached ribosomes (arrowheads) and assembling virions were also evident. Bars: 500 nm (A), 100 nm (B to D).

ASFV zipper-like structures. Inspection of the areas contiguous with the assembly sites revealed the presence of a minor subpopulation of atypical viral structures (Fig. 5A). These viral forms which we refer to as zipper-like structures, seemed to consist of two ER cisternae bound by an extended and electron-dense viral domain structurally similar to the core shell (see below). To elucidate the unusual structure of these viral intermediates, two different approaches were undertaken. On the one hand, we examined the zipper-like structures of infected cells permeabilized with SLO. By this method, the soluble contents of the cytosol were extracted but the luminal contents, which were now easily identifiable, were not extracted (Fig. 5B). Under these conditions, the core shell appeared unequivocally limited by the luminal spaces of adjacent ER cisternae, thus confirming the previous interpretation. In the other aproach, the zipper-like structures were analyzed by using serial sections. As deduced from Fig. 5C, the viral domain is a laminar structure whose limiting surfaces are bound to the cytoplasmic sides of the ER membranes. Together, these finding confirm the interaction of ASFV structures with ER membranes.

View larger version (145K): [in this window] [in a new window]   FIG. 5.   Topology of the zipper-like structures. (A and B) Ultrathin Epon sections of marginal zipper-like structures within a nonpermeabilized (A) or SLO-permeabilized (B) infected cell at 16 h p.i. Note in the control (A) how the limits of the viral intermediate appear to be continuous with two adjacent ER cellular cisternae (arrowheads). After cell permeation (B), the cytosol (C) is extracted but not the luminal contents (L), which become obvious. Thus, it is clear that the core shell is a cytosolic structure limited by two ER cisternae. (C1 to C3) Set of serial sections of a peripheral zipper-like structure. The core shell is interpreted as a laminar structure whose limiting surfaces interact with the cytoplasmic sides of ER cisternae. Note the presence of ribosomes (small arrows) attached to ER membranes (arrowheads). Bars: 200 nm (A and B) and 100 nm (C1).

View larger version (144K): [in this window] [in a new window]   FIG. 6.   Assembly of zipper-like structures. Epon sections of viral zipper-like structures present in the bordering areas of the assembly sites (A and B) or within them (C to I). (A and B) Outside the viral factories (VF), these atypical viral intermediates (arrows in panel A) consist of an extended core shell limited by two membrane cisternae (arrowheads in panel B). (C to E) Within the viral factories, closely related zipper-like structures are also found (arrows in panel C). These intermediates are composed by an extended core shell limited by two typical membrane-like structures (arrowheads in panel D). When examined in detail (panels E and F are higher magnifications of the areas delimited in panel D), two apposed lipid membranes (arrowheads) can be discerned within each limiting viral envelope. (G to K) Eventually, the zipper-like structures become polyhedral particles by the progressive formation of a capsid layer (c) on one of the two limiting envelopes (ie). Concomitantly, a nucleoprotein-like material appears to be encapsidated within some double-enveloped particles (arrowheads in panels I and J). Finally, after membrane fusion events, the resulting closed particles contain two inner envelopes encompassing the core shell (K). Note that the core shell is formed by two regular arrays of protein subunits (arrowheads in panel K) separated by a thin electron-dense protein layer. Bars: 500 nm (A) and 100 nm (B to K).

Immunolocalization of ER proteins within viral structures. To confirm the cellular origin of the viral envelopes, we performed immunogold labeling with antibodies to ER proteins on sections of infected cells processed at 18 h p.i. for freeze-substitution (Fig. 7A to C) or cryosectioning (Fig. 7D and E). As shown in Fig. 7A, the labeling with antibodies to the luminal protein PDI was virtually excluded from the assembly sites. However, a strong signal was observed in the intracisternal spaces of marginal zipper-like structures (Fig. 7B). The mixted cellular and viral nature of these intermediates was confirmed by double-labeling experiments with antibodies to the ER protein PDI and to ASFV polyprotein pp220, which has been shown previously to localize within the viral core shell (3). As shown in Fig. 7C, whereas the luminal contents was labeled with anti-PDI antibodies, the viral domains were labeled with the anti-pp220 serum. On the other hand, the serum against membrane ER glycoproteins showed low but significant labeling associated with virus intermediates within the assembly sites (Fig. 7D) and strong labeling on the membranes of marginal zipper-like structures (Fig. 7E).

View larger version (159K): [in this window] [in a new window]   FIG. 7.   Immunogold labeling of ER marker proteins in ASFV-infected cells. Vero cells infected with ASFV for 18 h p.i. were processed by freeze-substitution (A to C) or cryosectioning (D and E). (A and B) Ultrathin sections were incubated with a MAb against the luminal ER protein PDI followed by rabbit anti-mouse immunoglobulin G and protein A-gold (diameter, 15 nm). Note that anti-PDI labeling (arrowheads) is essentially excluded from the assembly sites (A) but not from the luminal contents of peripheral zipper-like structures (B). (C) Double labeling of a zipper-like structure with antiserum to polyprotein pp220 followed by protein A-gold (diameter, 10 nm) and with the anti-PDI MAb followed by protein A-gold (diameter, 15 nm). The anti-pp220 labeling (arrowheads) is located within the core shell, while PDI (arrows) is present within the associated cisterna. (D and E) Thawed cryosections were incubated with anti-MERG antiserum followed by protein A-gold (diameter, 10 nm). The labeling is associated with the membranes of marginal zipper-like structures (D and E) and, to a much lesser extent, to viral structures within the viral factories (E). Bars: 500 nm (A) and 200 nm (B to E).

Recombinant vA72 intermediates are enwrapped by collapsed ER cisternae. We have recently shown that the zipper-like structures can be accumulated after infection with a recombinant virus, vA72, which inducibly expresses the major capsid protein p72 (15). Such a recombinant is IPTG dependent, and in the absence of the inducer, ASFV assembly is arrested at a stage where capsid formation is inhibited and most of the precursor membranes form zipper-like intermediates (15). We therefore took advantage of these observations to analyze the process of viral envelopment. To produce large amounts of zipper-like structures, Vero cells were infected with recombinant virus vA72 for 18 h in the absence of IPTG. After this period, the cells were processed by conventional Epon embedding. As shown in Fig. 8A, the assembly sites showed a virtual absence of icosahedral virus particles but a great accumulation of zipper-like structures. Importantly, these intermediates appeared clearly associated with ER cisternae at the boundaries of the viral factories (Fig. 8A and B). Moreover, such ER cisternae appeared often collapsed by the apposition of the limiting membranes and the subsequent constriction of the luminal spaces (Fig. 8C).

View larger version (138K): [in this window] [in a new window]   FIG. 8.   Origin of the inner envelope of ASFV recombinant vA72. Epon sections of Vero cells infected with recombinant virus vA72 for 18 h in the absence of IPTG (A to C), or treated with the inducer at 18 h p.i. for an 8-h period (D) are shown. (A) Under nonpermissive conditions, the viral factories (VF) show a great accumulation of zipper-like structures and a virtual absence of polyhedral viral structures, as a consequence of the inhibition of capsid formation. In the peripheral areas of the assembly sites, the zipper-like structures appear clearly associated with ER cisternae (arrowheads). (B) Higher magnification of the region delimited in panel A. Note how a rough ER cisterna (arrowheads) appears directly bound to an extended viral core shell. The small arrows indicate ribosomes. (C) Partially collapsed ER cisternae associated with zipper-like structures. The arrowheads delimit local extensions where the cisternal structure is still evident. In our interpretation, the collapse would lead to formation of the viral envelopes by the tight apposition of the two limiting lipid bilayers. (D) Detail of a viral factory after an 8-h period of IPTG induction. Under these conditions, the zipper-like structures become polyhedral intermediates by the de novo and gradual assembly of the capsid layer (c) on the inner envelope (ie). The arrows indicate the ends of two capsids assembling on opposite faces of the same zipper-like structure. Note also the presence of membrane loops (arrowheads) at the ends of the viral envelopes. Bars: 500 nm (A) and 100 nm (B to D).

	DISCUSSION

Top Abstract Introduction Materials & Methods Results Discussion References

Large enveloped DNA viruses like poxviruses and herpesviruses take their membranes by an enwrapping process from cellular cisternae (16, 29, 33, 38, 43). In the present study, we propose that ASFV, another complex DNA virus, uses a similar mechanism to acquire its inner envelope. According to our previous work, the assembly pathway of ASFV is a complex multistep process which is first manifested by the appearence of electron-dense membranous structures within cytoplasmic viral factories. These precursor viral membranes enclose the core material while becoming polyhedral particles by the gradual assembly of the capsid on their convex surfaces (3, 15). As a consequence, the resulting intracellular particles are composed of a core surrounded by two shells, an inner envelope and an outer capsid. The whole process occurs in the cytosol, so that a budding process cannot explain ASFV envelopment. Additionally, this implies that both faces of the viral envelope are exposed to a cytosolic environment. Our model is not, however, topologically consistent with the classical view of the structure of ASFV and of the related iridoviruses, which considers the inner envelope to be a single lipid membrane (7, 10, 20, 41). Cellular membranes are asymmetric structures, with one face exposed to the cytosol and the other exposed to either the luminal or the extracellular space. Assuming that viral membranes are derived from the host cell and respect its topology (19, 26, 40), we first asked whether ASFV is wrapped by a cellular cisterna instead of a single membrane.

The results of the present work, based on both ultrastructural and immunocytochemical EM approaches, support the conclusion that the inner viral envelope is derived from a collapsed two-membraned ER cisterna. Two distinct membranes could be discerned within all intracellular viral forms, from the precursor membrane-like structures onward. However, they appeared so tightly bound that they usually seemed to be a single lipid bilayer. Importantly, the two membranes appeared to be frequently interconnected by loop-like structures at the ends of the precursor viral membranes as well as in open polyhedral assembling virions. Together, these data argue for the cisternal nature of the inner envelope.

Additional support for this model was obtained from experiments involving selective disruption of virus particles. This approach revealed that the outer capsid was resistant to treatments with nonionic detergents but digested with proteinase K. The resulting particles retained the icosahedral symmetry in the first case but not in the second. These results are in agreement with the protein nature of the capsid and confirm its central role in the ASFV morphology (7, 15). By contrast, the inner envelope showed the opposite behavior. It was removed by detergents but not by the proteinase. Importantly, after the proteinase K treatment, two detached membranes became obvious within the inner envelope of highly disrupted particles, which is consistent with the architecture proposed for ASFV.

During the preparation of this communication, a report by Roullier et al. (31) suggested a different structure for the intracellular ASFV particles. On the basis of the electron-lucent appearance alone, these authors interpret the two main shells encompassing the viral core to be lipid membranes. Additionally, in such a model, the capsid is an outermost structure that, surprisingly, is not visible or identified in the reported micrographs. In our opinion, it is well established that the second, outer shell of ASFV and also of the related iridoviruses is an icosahedral capsid made up of protein units, the capsomers, closely packaged in an hexagonal arrangement (Fig. 1C) (2, 7, 10, 20, 41). We have recently shown that this layer is progressively assembled on preexisting membrane-like structures, which concomitantly become polyhedral particles (Fig. 1E and 6G and H) (3). Moreover, its formation can be reversibly inhibited with a recombinant virus, vA72, that inducibly expresses the major capsid protein p72 (Fig. 8A to C) (15). In other words, this shell does not exist when p72 expression is inhibited but it can be assembled de novo on the inner envelope after IPTG induction (Fig. 8D). Finally, the present work shows that this layer is resistant to detergent treatments whereas it is digested by proteinase K (Fig. 2). We therefore believe that the outer shell described by Roullier et al. as a lipid membrane is in fact the viral capsid.

An alternative possibility based on both models, i.e., that the capsid is a virus-modified membrane, does not seem probable. On the one hand, the above considerations do not support the presence of a lipid membrane within the capsid layer. On the other hand, such a hypothesis would imply that the capsomers are inserted into a lipid bilayer. However, the major capsid protein p72 lacks transmembrane domains (22) and has been recently characterized by Cobbold et al. as a peripheral membrane protein (8). Such evidence is consistent with our present model.

The second important question analyzed in the present study is the origin of the inner viral envelope. Double-immunofluorescence experiments showed a strong presence of ER and Golgi markers at the limits of the assembly sites but a drastic exclusion of these proteins from the internal areas. At the EM level, morphological and immunocytochemical approaches revealed a close association and even direct continuities between ER membranes and viral intermediates at the periphery of the assembly sites. Collectively, these results indicate that the viral envelopes are derived from ER cisternae and that their transformation into viral intermediates is probably confined to the peripheral areas of the viral factories. This would explain the virtual absence of cell organelles within the assembly sites and the difficulty in detecting direct continuities between cellular and viral membranes (3, 23; see above). In this respect, the immunolabeling data are in agreement with the extended view that the enveloped viruses effectively exclude and replace the host membrane proteins by virus-encoded proteins (26, 40). A study by Brookes et al. (5) showed that during ASFV infection, the viral factory increases in size considerably, conquering new cytoplasmic areas. According to our observations, this fact could be the result of the continued demand for ER membranes during ASFV assembly.

The analysis of the viral zipper-like structures provided a useful approach to understanding the process of envelopment of ASFV. These viral intermediates, which are frequently observed although in small amounts, consist of two adjacent membrane cisternae bound by an extended viral domain structurally similar to the viral core shell (3). In relation to the limiting membrane cisternae, two extreme situations were observed. In the peripheral areas of the viral factories, they appeared as typical ER cisternae with ribosome-attached membranes containing both luminal and membrane ER host proteins. By contrast, within the viral factories, the zipper-like structures appeared limited by typical viral envelopes made up of two closely apposed membranes. This finding suggests, together with the observation of zipper-like structures with partially collapsed ER cisternae during the assembly of recombinant vA72, that the collapse of ER cisternae leads to the formation of the inner viral envelope.

An interesting aspect of the zipper-like structures is the unusual topology of the core shell. Whereas the core shell of normal particles is located between the inner envelope and the nucleoid, in the zipper-like intermediates it is encompassed by lipid membranes. Interestingly, in both cases, this viral domain appears to be composed of two regular arrays of globular subunits separated by a thin electron-dense layer (3) (Fig. 6K). Such a configuration is consistent with the symmetrical features of the zipper-like intermediates but does not explain the polarization of the core shell in normal particles. This difference might reflect the eventual absence of a key viral component(s) during the assembly of the zipper-like structures. In this sense, the finding that these viral forms accumulate when the expression of the capsid protein p72 is inhibited (15) implies that this protein and the process of capsid formation play a role in the polarization of the virus intermediates.

Collectively, the results of this work suggest a model for the assembly of ASFV as presented in Fig. 9. The process probably begins with the insertion of key viral proteins into the ER membranes and the concomitant exclusion of the host cell proteins. Intraluminal interactions between viral membrane proteins would lead to the collapse of the ER cisternae, giving rise to the precursor viral membranous structures. Subsequently, peripheral membrane proteins like p72 (8) would bind to the viral envelope to form the capsid layer on one face, while other membrane-associated proteins such as polyprotein pp220 (3) would form the core shell on the opposite side. Such a model implies a polarization of the collapsed cisternae that needs to be elucidated. One possibility is that distinct viral membrane integral proteins are differently sorted into the outer and inner membranes of the viral envelope. Another possible explanation is that the viral envelope becomes polarized by cooperative interactions between peripheral membrane proteins on local extensions of the collapsed cisterna. In this sense, the progressive assembly of the capsid components and the subsequent bending of the envelope could represent a key event in the generation of asymmetrical viral envelopes. During the late stages of ASFV morphogenesis, the nucleoprotein material of the nucleoid is probably assembled within the particle at the time when it is closing (3). Finally, the intracellular particles would be released to the extracellular space by a budding process at the plasma membrane (4). As a consequence, the resulting ASFV particles would contain three lipid membranes, with the two innermost ones being derived from a collapsed cisterna. Although this model is strongly supported by morphological and immunocytochemical evidence, further efforts will be required to understand the molecular mechanisms involved in crucial events such as the collapse and polarization of the cisternal viral envelope or the encapsidation of the viral genome.

View larger version (40K): [in this window] [in a new window]   FIG. 9.   Model for ASFV assembly. Intracellular ASFV particles acquire their inner envelopes from the ER. The envelopment probably begins by the insertion of viral proteins into the ER membranes and, concomitantly, the exclusion of the host membrane proteins. During this process, the cell compartment would be collapsed to give rise to precursor viral structures formed by two tightly apposed membranes. Subsequently, the capsid would be gradually assembled on one side of the inner envelope whereas the core shell would form beneath the opposite face. At the time the particle is closing, the nucleoprotein material of the nucleoid would become engulfed. Finally, the intracellular particles would release from the cell by budding at the plasma membrane (PM). According to this model, the resulting extracellular ASFV particles would contain three lipid membranes.

Despite the obvious morphological differences between ASFV and the poxviruses, this assembly model is analogous in some aspects to that described for the intracellular mature form of vaccinia virus (IMV). According to Roos et al. (29), the lipid envelope of IMV consists of two juxtaposed lipid membranes covered by a brush-like array of protein spicules on its convex surface. This envelope is derived from cisternal elements of the intermediate compartment, a specialized region of the ER contiguous with the Gogi complex (38). Importantly, the two apposed membranes of IMV are usually indiscernible but become obvious after protease treatments (38). ASFV and the poxviruses share striking features such as the genome organization (44) or the transcriptional control of gene expression (28). In this context, our present work establishes a new similarity between the two families of complex deoxyviruses. On the other hand, considering the closely related morphology of the iridoviruses and ASFV (7, 41), which was formerly considered to be one of them, it could be predicted that a similar mechanism would also explain their assembly pathway.